Air Cylinder, Standard Type, Lubrication-Free Type, 55-CS1 Series

[What is the ATEX Directive?]
Compliance with the ATEX Directive is required for equipment used in potentially explosive atmospheres within the EU from July 1, 2003.
■ CE Mark and ATEX
The ATEX Directive is part of the CE Mark scheme and incorporates existing European explosion-proof standards.
■ Goals of the ATEX Directive
The principal goals of ATEX are as follows.
· Prevention of static charge
· Prevention of ignition by sparks generated by friction, impact and wear
· Prevention of ignition due to temperature rise due to the same　causes as above
· Manufacturers are responsible
· Certified by zone/category
■ Zone/category classifications
ATEX categorizes targets for application by each classification of danger zone.
· Zone 0: Category 1
Potential for explosive atmosphere to be present (zone): Continuous or long-term, >1,000 hours/year
· Zone 1: Category 2
Potential for explosive atmosphere to be present (zone): Occasional, 10 to 1,000 hours/year
· Zone 2: Category 3
Potential for explosive atmosphere to be present (zone): Unlikely or short-term, <10 hours/year

(i)Remark

■ SMC Air Cylinder Product Selection and Technical Information
Please check the special page from here.

■About SMC product handling
products without a web page will be released one by one.
If you have a fixed model number, please request a quote / order from here.
Refer to the manufacturer's catalog for specification and material details.
Product images may be representative images only. Please refer to the manufacturer's catalog for shape details.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Save
Similar products
Product data
CAD data not available

Products homepage

Data to be displayed: 30; 45; 60

Part Number
55-CDS1BN200-250
55-CDS1BN200-750
55-CDS1DN200-250
55-CDS1FN180-200
55-CS1BN140-260
55-CS1BN250-700
55-CS1DFN125-300
55-CS1DFN160-300
55-CS1DN180-450
55-CS1DN250-600
55-CS1FN300-475
55-CS1TN250-600

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Cylinder I.D: D (Ø)	Stroke: L (mm)	Specifications	Type of Mount Support	Tube Material
1,358.32 €	1	64 Days	200	250	Built-in magnet	Basic type	Iron tube
1,894.73 €	1	98 Days	200	750	Built-in magnet	Basic type	Iron tube
1,358.32 €	1	64 Days	200	250	Built-in magnet	Double clevis	Iron tube
1,161.21 €	1	46 Days	180	200	Built-in magnet	Rod-end flange type	Iron tube
728.61 €	1	64 Days	140	260	Without magnet	Basic type	Aluminum tube
2,595.32 €	1	64 Days	250	700	Without magnet	Basic type	Iron tube
652.35 €	1	64 Days	125	300	Without magnet	Double clevis	Iron tube
864.35 €	1	64 Days	160	300	Without magnet	Double clevis	Iron tube
1,387.95 €	1	68 Days	180	450	Without magnet	Double clevis	Iron tube
2,442.68 €	1	64 Days	250	600	Without magnet	Double clevis	Iron tube
3,060.65 €	1	98 Days	300	475	Without magnet	Rod-end flange type	Iron tube
2,708.40 €	1	64 Days	250	600	Without magnet	Center trunnion type	Iron tube

Basic information

Cylinder Operation Method	Double Acting	Rod Operation Method	Single Rods	Main Body Shape	Standard
Additional Function	Standard	Environment, Applications	Standard	Operating Temperature(℃)	0::70
Operating Pressure(MPa)	0.05::0.97	Cushion	With cushions on both sides	Port thread type	Rc
Type	Non-lube

Configure

12Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Cylinder I.D: D(Ø)
125

140

160

180

200

250

300
Clear
Stroke: L(mm)
200

250

260

300

450

475

600

700

750
Clear
Specifications
- Built-in magnet
- Without magnet
Clear
Type of Mount Support
- Basic type
- Center trunnion type
- Double clevis
- Rod-end flange type
Clear
Tube Material
- Aluminum tube
- Iron tube
Clear
Type
- 55-CDS1
- 55-CS1
Clear