Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CA2K Series (CDA2KB50-75)

SMC

Product Details:

Manufacturer part number: CDA2KB50-75

Brand: SMC

Price: 231.03 €

Delivery time: 51 Days

Technical Data:

Cylinder (Tube) Inner Diameter: 50 Ø

Stroke: 75 mm

Cushion: Air cushion

Specifications: Built-in magnet

Port thread type: Rc

(i)Remark

See catalog for specification details.
CAD data is not supported for some model numbers.
Product pictures are representations.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

CDA2KB50-75

Product specification
Part Numbers
Catalog

Model Number Notation

Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod, CA2K Series Specifications

Appearance of CA2K series

JIS symbol of CA2K series (air cushion)

Tube Inner Diameter (mm)	40	50	63
Fluid	Air
Proof Pressure	1.5 MPa
Maximum operating pressure	1.0 MPa
Minimum operating pressure	0.05 MPa
Ambient and fluid temperature	Without auto switch -10 to 70°C with auto switch -10 to 60°C *
Piston Speed	50 to 500 mm/s
Cushioning	Air cushion
Stroke Length Tolerance	Up to 250^st: (0- + 1.0), 251-600^st: (0 to +1.4)
Rod Non-rotating Accuracy	±0.8°
Allowable rotational torque	0.44N·m or Less
Lubrication	Not required (non-lubricated)
Mounting type	Basic type, axial foot type, rod-end flange type, head-end flange type, single clevis type, double clevis type, center trunnion type

*No freezing.

Weight Table

(Unit: kg)

Tube Inner Diameter (mm)		40	50	63
Basic weight	Basic Type	0.88	1.32	1.91
	Axial foot type	1.07	1.54	2.25
	Flange	1.25	1.77	2.70
	Single clevis	1.11	1.66	2.54
	Double clevis type	1.15	1.75	2.70
	Trunnion type	1.24	1.80	2.71
Additional weight per 50 mm of stroke		0.20	0.25	0.30
Accessories	Single knuckle joint	0.23	0.26	0.26
Accessories	Double knuckle joint (with pin)	0.37	0.43	0.43

Calculation

(Example) CA2KL40-100

Basic weight: 1.07 (Axial foot type ⌀40 (tube inner diameter 40 mm))
Additional weight: 0.20 / 50 stroke
Cylinder stroke: 100 stroke

1.07 + 0.20 x 100/50 = 1.47 kg

Rod Boot Material

Rod boot material (J): nylon tarpaulin, maximum ambient temperature 70°C
Rod boot material (K): heat-resistant tarpaulin, maximum ambient temperature 110°C*

*Maximum ambient temperature for the rod boot unit.

Structural Drawing

CA2K Series structural drawing

Number	Name	Material	Notes
1	Rod cover	Aluminum alloy	Metallic coating
2	Head cover	Aluminum diecast	Metallic coating
3	Cylinder Tube	Aluminum alloy	Hard anodized aluminum
4	Piston rod	Carbon steel	Hard chrome plating
5	Piston	Aluminum alloy	Chromate
6	Cushion Ring A	Rolled steel	Zinc chromate
7	Cushion Ring B	Rolled steel	Zinc chromate
8	Non-Rotating Guide	Oil-impregnated sintered alloy	—
9	Cushion valve	Steel wire	Zinc trivalent chromate
10	Tie-rod	Carbon steel	Zinc trivalent chromate
11	Spring Washer	Steel wire	Zinc trivalent chromate
12	Piston Nut	Rolled steel	Zinc trivalent chromate
13	Retaining Ring	Spring steel	Phosphate Coated
14	Spring Washer	Steel wire	Zinc trivalent chromate
15	Tie-rod nut	Rolled steel	Zinc trivalent chromate
16	Wear Ring	Resin	—
17	Cushion seal holder	Aluminum alloy	—
18	Cushion Seal	Urethane	—
19	Rod packing	NBR	—
20	Piston packing	NBR	—
21	Cushion valve seal	NBR	—
22	Cylinder Tube Gasket	NBR	—
23	Piston gasket	NBR	O-ring
24	Rod end nut	Rolled steel	Zinc trivalent chromate

*Do not disassemble the trunnion type. Please refer to the catalog for details.

Dimensions

(Units: mm)

Basic type CA2KB dimensional drawing

(Units: mm)

Tube inner diameter (mm)	Stroke range (mm)		A	AL	B	B₁	C	D	E	F	G	H₁	J	KA	M	MM
Tube inner diameter (mm)	Without rod boot	With bellows	A	AL	B	B₁	C	D	E	F	G	H₁	J	KA	M	MM
40	Up to 500	20 to 500	30	27	60	22	44	16	32	10	15	8	M8 × 1.25	14	11	M14 × 1.5
50	Up to 600	20 to 600	35	32	70	27	52	20	40	10	17	11	M8 × 1.25	18	11	M18 × 1.5
63	Up to 600	20 to 600	35	32	85	27	64	20	40	10	17	11	M10 × 1.25	18	14	M18 × 1.5

(Units: mm)

Tube inner diameter (mm)	N	P	S	Without rod boot		With bellows
Tube inner diameter (mm)	N	P	S	H	ZZ	d	e	f	h	L	ZZ
40	27	1/4	84	51	146	56	43	11.2	59	1/4 stroke	154
50	30	3/8	90	58	159	64	52	11.2	66	1/4 stroke	167
63	31	3/8	98	58	170	64	52	11.2	66	1/4 stroke	178

* Please refer to the catalog as the external dimensions of the accessories (options) for each mounting support type are the same as the standard type / double moving piece rod.

Notes

Minimum Stroke for Auto Switch Mounting

*The minimum stroke for mounting varies with the auto switch type and cylinder mounting type. In particular, the center trunnion type requires careful attention. (Refer to the catalog for details.)

Usage Precautions

* Avoid using it to give rotational torque to the piston rod. The detent guide will be deformed and the non-rotation accuracy will increase. Also, when screwing the nut into the threaded part at the tip of the piston rod, make sure that the piston rod is pulled in to the final end and hook the spanner on the part that protrudes from the parallel part of the rod.
At this time, be careful not to apply the tightening torque to the detent guide when tightening.

Correct installation drawing

Wrong installation drawing

Disassembly/Replacement

* To replace the rod packing, please contact our manufacturer's support center. Air leakage may occur depending on the position where the rod packing is installed. please contact our support center when replacing it.
Do not replace the detent guide. The detent guide is press-fitted, so when replacing it, replace it with the cover assembly.

Other

* Please be sure to check "safety precautions", "actuators / common precautions" and "auto switch / common precautions" in the catalog before use.
*Product images are representative models.
*See the SMC catalog for information other than that detailed above.

■ Refer to the table below for details about lead wire / connector specifications.

■Made to Order Specifications: Please refer to the following for details on changing the mounting position of the trunnion bracket.

Data to be displayed: 30; 45; 60

Part Number
CDA2KB50-75

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Cylinder (Tube) Inner Diameter (Ø)	Stroke (mm)	Cushion	Specifications	Port thread type	Auto Switch	Lead Wire Length (m)	Number of Switches	Type of Mount Support	Bellows	Connector type	Type
	231.03 €	1		51 Days	50	75	Air cushion	Built-in magnet	Rc	None	-	-	Basic type	None	-	-

Basic information

Cylinder Operation Method	Double Acting	Rod Operation Method	Single Rods	Main Body Shape	Standard
Additional Function	With rod detent function	Environment, Applications	Standard	Operating Pressure(MPa)	0.05 to 1.0
Custom-made Specifications	None

This page is Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CA2K Series, part number CDA2KB50-75.
You can find the detail information about specifications and dimensions on part number CDA2KB50-75.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Lead Wire Length(m)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 3
- 5
Clear
Number of Switches
2

3
Clear
Connector type
- None
Clear
Type
Standard
Clear
Type
- CA2K
- CDA2K
Clear
Cylinder (Tube) Inner Diameter(Ø)
40

50

63
Clear
Stroke(mm)
10

15

25

30

40

50

75

80

100

110

115

125

140

150

160

175

200

250

280

300

328

350

400

430

500

600
Clear
Cushion
- Air cushion
- Without cushion
Clear
Specifications
- Built-in magnet
- Without magnet
Clear
Port thread type
- G
- NPT
- Rc
Clear
Auto Switch
M9B

M9BW

A53

None

Without auto switch
Clear
Type of Mount Support
- Axial foot type
- Basic type
- Center trunnion type
- Head-end flange
- Rod-end flange type
- Single clevis
- U-Shaped Clevis Type
Clear
Bellows
None

Nylon tarpaulin

Without rod boot
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

17 Days or Less

28 Days or Less

45 Days or Less

46 Days or Less

50 Days or Less

51 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
CA2KB40-175
CA2KB40-25
CA2KB40-250
CDA2KB50-80
CDA2KB63-100
CDA2KB63-125

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	Cylinder (Tube) Inner Diameter (Ø)	Stroke (mm)	Cushion	Specifications	Port thread type	Auto Switch	Lead Wire Length (m)	Number of Switches	Type of Mount Support	Bellows	Connector type	Type
182.68 €	1	51 Days	40	175	Air cushion	Without magnet	Rc	-	-	-	Basic type	None	-	-
156.89 €	1	51 Days	40	25	Air cushion	Without magnet	Rc	-	-	-	Basic type	None	-	-
195.60 €	1	46 Days	40	250	Air cushion	Without magnet	Rc	-	-	-	Basic type	None	-	-
238.58 €	1	46 Days	50	80	Air cushion	Built-in magnet	Rc	None	-	-	Basic type	None	-	-
280.52 €	1	51 Days	63	100	Air cushion	Built-in magnet	Rc	None	-	-	Basic type	None	-	-
288.02 €	1	51 Days	63	125	Air cushion	Built-in magnet	Rc	None	-	-	Basic type	None	-	-