Megerősítve
  • Type
  • I.D. d(mm)
  • Thickness T(mm)
  • O.D. D(mm)
  • For pin d6(mm)
  • h1(mm)
  • h2(mm)
  • h4(mm)
  • r1(mm)
  • Load capacity for static load max.(kN)
  • Torque for screwed connections max.(Nm)
  • Suitable for
  • Type
  • CAD
  • Becsült szállítási napok
    • Minden
    • Aznapi feladás lehetséges

Spherical Washers / Conical Seats, DIN 6319 (23050.0010)

Cikkszám:

23050.0010
Törlés
Mennyiség:
Loading...

Termékadatok

Spherical Washers / Conical Seats • DIN 6319, EH 23050.

Product Description

Spherical washers / Conical seats are used as washers in a screw connection to compensate non-parallel surfaces.

Material

Conical seat
• Case-hardened steel, case-hardened, manganese phosphated
• Heat-treated steel, tempered, manganese phosphated
Spherical washer
• Case-hardened steel, case-hardened, manganese phosphated

Assembly

Conical seats form D are to be used only for plain, closed round areas.
For larger holes only use form G!

Further products

• Spherical Washers / Conical Seats, similar to DIN 6319, stainless steel
• Fixture Nuts, DIN 6330 (height 1.5 d)

Drawing

picture 1 picture 2 picture 3

Order Information

DimensionsFor pinFor screwsLoad
capacity
for static
load

max.
Torque for
screwed
connections

max.
WeightArt. No.
d1d2d3d4d5h1h2h3h4r1d6d6  
H13H13      with
conical
seat
form D

~
with
conical
seat
form G

~
     
[mm][mm][mm][kN][Nm][g] 
spherical washers from case-hardened steel, form C – picture 1
6.4120.72.34.25.49.06M 69101)1.023050.0006
8.4170.63.25.67.112.08M 817251)2.823050.0008
10.5210.84.06.57.315.010M1026461)0.823050.0010
13.0241.14.68.09.017.012M1238821)8.023050.0012
15.0281.45.08.59.522.014M14531301)12.023050.0014
17.0301.35.39.610.422.016M16732061)13.023050.0016
21.0362.06.311.712.227.020M201174071)23.023050.0020
23.0402.57.613.529.522M221465421)35.023050.00222)
25.0442.48.215.215.732.024M241686981)43.023050.0024
28.0503.310.217.036.027M2722110211)74.023050.00272)
31.0563.611.219.219.741.030M3026913551)103.023050.0030
34.0624.413.021.845.033M333263)19693) 1)150.023050.00332)
37.0684.614.023.550.036M3639423721)193.023050.0036
40.0755.616.026.854.039M394603)32763) 1)280.023050.00392)
43.0786.517.029.058.042M4254238021)310.023050.0042
50.0928.021.035.567.048M4871457301)549.023050.0048
54.0969.322.038.372.052M528323)78763) 1)610.023050.00522)
58.01039.823.039.379.056M569603)97933) 1)760.023050.00562)
62.011211.025.043.686.060M6011223)122193) 1)990.023050.00602)
66.012012.027.046.693.064M6412693)147623) 1)1220.023050.00642)
conical seats from case-hardened steel, form D – picture 2
7.11211.02.86M 69101)1.323050.0106
9.61714.53.58M 817251)3.723050.0108
12.02118.54.210M1026461)13.023050.0110
14.22420.05.012M1238821)10.023050.0112
16.52824.85.614M14531301)15.023050.0114
19.03026.06.216M16732061)18.023050.0116
23.23631.07.520M201174071)31.023050.0120
26.04034.08.522M221465421)44.023050.01222)
28.04437.09.524M241686981)61.023050.0124
31.55043.010.527M2722110211)87.023050.01272)
35.05649.012.030M3026913551)125.023050.0130
38.56255.014.033M333263)19693) 1)180.023050.01332)
42.06860.015.036M3639423721)230.023050.0136
45.07567.017.039M394603)32763) 1)330.023050.01392)
49.07870.018.042M4254238021)360.023050.0142
56.09282.022.048M4871457301)640.023050.0148
60.09685.024.052M528323)78763) 1)740.023050.01522)
65.010393.025.056M569603)97933) 1)900.023050.01562)
70.0112102.028.060M6011223)122193) 1)1160.023050.01602)
75.0120110.030.064M6412693)147623) 1)1430.023050.01642)
conical seats from heat-treated steel, form G – picture 3
7.11711.04.06M 69101)5.623050.0206
9.62414.55.08M 817251)14.023050.0208
12.03018.55.010M1026461)22.023050.0210
14.23620.06.012M1238821)39.023050.0212
16.54024.86.014M14531301)47.023050.0214
19.04426.07.016M16732061)65.023050.0216
23.25031.08.020M201174071)93.023050.0220
28.06037.010.024M241686981)165.023050.0224
35.06849.012.030M3026913551)235.023050.0230
1) Torques of screws with standard thread, eventual pre-loads to be considered, coefficient of friction μtotal 0.14.
2) DIN standards do not include these dimensions.
3) Figures theoretically determined

Application Example

Cikkszámlista

Elemek száma
Cikkszám
23050.0010
Kapcsolódó

Type

I.D. d

(mm)

Thickness T

(mm)

O.D. D

(mm)

d4

(mm)

d5

(mm)

For pin d6

(mm)

h1

(mm)

h2

(mm)

h3

(mm)

h4

(mm)

r1

(mm)

Load capacity for static load max.

(kN)

Torque for screwed connections max.

(Nm)

Suitable for

Conical seat

Spherical washer

RoHS?Minimális rendelési mennyiség
Spherical Washer
10.5
4
21
-
-
10
0.8
4
-
~ 6.5
15
26
46
M10
-
Case-hardened steel, case-hardened, manganese phosphate
10
1 darab
Egységár (HÉA nélkül)(egységár adóval)
Normál feladási dátum
0.72 €
( 0.86 € )
Raktári cikk - 1 munkanapAznapi kiszállítással elérhető

Részletes információk

Alapvető információk

Conical seats form D are to be used only for plain, closed round areas.
For larger holes only use form G!

A cikkszám megerősítésre került