Spring Plungers, smooth, with collar and ball
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Spring Plungers • smooth, with collar and ball, EH 22080.
Product Description
 | Spring plungers can be used for locating or for applying pressure, as a detent or for ejection. |
Material
• Stainless steel 1.4303
• Brass
• Thermoplastic POM, blue
Ball
• Stainless steel, hardened
• Thermoplastic POM, white
Spring
• Stainless steel
Assembly
Characteristic
Standard spring load: no marking
Reinforced spring load: marked with two lines
 |  |  | ||
| Light spring load | Standard spring load | Heavy spring load |
Notes
Spring plungers are specially tested for spring range and forces.
References
Version with higher spring forces see "EH 22080. Spring Plungers, smooth, long, with collar and ball".
Further products
• Spring Plungers, smooth, long, with collar and ball
• Spring Plungers, smooth, with collar and ball, self-clamping
• Holders, for spring plungers
Drawing
Order Information
| Dimensions | Stroke | Spring load1) | Operating temperature range | Location hole | Weight | Art. No. | ||||||
| d1 | d2 | d3 | l1 | l2 | s | F1 | F2 | min. | max. | H7 | ||
| +0.1 | ~ | ~ | ~ | |||||||||
| [mm] | [mm] | [N] | [°C] | [mm] | [g] | |||||||
| body and ball from stainless steel, light spring load – picture 1 | ||||||||||||
| 4 | 3.00 | 4.6 | 5.0 | 0.9 | 1.00 | 0.4 | 1.0 | – | 250 | 4 | 0.3 | 22080.1004 |
| 5 | 4.00 | 5.6 | 6.0 | 0.9 | 1.40 | 0.5 | 4.7 | – | 250 | 5 | 0.6 | 22080.1005 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.80 | 2.3 | 6.5 | – | 250 | 6 | 1.0 | 22080.1006 |
| 8 | 6.50 | 8.5 | 9.0 | 1.1 | 2.40 | 4.0 | 9.0 | – | 250 | 8 | 2.0 | 22080.1008 |
| 10 | 8.50 | 11.0 | 13.0 | 1.5 | 3.30 | 3.9 | 10.0 | – | 250 | 10 | 4.4 | 22080.1010 |
| 12 | 10.00 | 13.0 | 16.0 | 2.3 | 4.00 | 6.2 | 14.6 | – | 250 | 12 | 7.0 | 22080.1012 |
| body and ball from stainless steel, standard spring load – picture 1 | ||||||||||||
| 3 | 2.38 | 3.5 | 4.0 | 0.6 | 0.70 | 1.8 | 3.5 | – | 250 | 3 | 0.1 | 22080.0003 |
| 4 | 3.00 | 4.6 | 5.0 | 0.9 | 1.00 | 2.5 | 6.0 | – | 250 | 4 | 0.3 | 22080.0004 |
| 5 | 4.00 | 5.6 | 6.0 | 0.9 | 1.40 | 3.0 | 6.5 | – | 250 | 5 | 0.6 | 22080.0005 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.80 | 5.5 | 11.5 | – | 250 | 6 | 1.0 | 22080.0006 |
| 8 | 6.50 | 8.5 | 9.0 | 1.1 | 2.40 | 7.0 | 12.5 | – | 250 | 8 | 2.1 | 22080.0008 |
| 10 | 8.50 | 11.0 | 13.0 | 1.5 | 3.30 | 8.5 | 18.5 | – | 250 | 10 | 4.5 | 22080.0010 |
| 12 | 10.00 | 13.0 | 16.0 | 2.3 | 4.00 | 12.0 | 26.5 | – | 250 | 12 | 7.2 | 22080.0012 |
| body and ball from stainless steel, heavy spring load – picture 1 | ||||||||||||
| 4 | 3.00 | 4.6 | 5.0 | 0.9 | 1.00 | 5.0 | 10.4 | – | 250 | 4 | 0.3 | 22080.2004 |
| 5 | 4.00 | 5.6 | 6.0 | 0.9 | 1.40 | 6.0 | 12.0 | – | 250 | 5 | 0.6 | 22080.2005 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.80 | 7.3 | 19.0 | – | 250 | 6 | 1.0 | 22080.2006 |
| 8 | 6.50 | 8.5 | 9.0 | 1.1 | 2.40 | 11.0 | 25.0 | – | 250 | 8 | 2.2 | 22080.2008 |
| 10 | 8.50 | 11.0 | 13.0 | 1.5 | 3.30 | 17.0 | 37.0 | – | 250 | 10 | 4.6 | 22080.2010 |
| 12 | 10.00 | 13.0 | 16.0 | 2.3 | 4.00 | 28.0 | 57.0 | – | 250 | 12 | 7.4 | 22080.2012 |
| body from brass, ball from stainless steel, standard spring load – picture 2 | ||||||||||||
| 3 | 2.38 | 3.6 | 4.0 | 0.6 | 0.60 | 1.8 | 3.5 | – | 250 | 3 | 0.2 | 22080.0203 |
| 4 | 3.00 | 4.5 | 5.0 | 1.0 | 0.80 | 3.0 | 6.0 | – | 250 | 4 | 0.4 | 22080.0204 |
| 5 | 4.00 | 5.5 | 6.0 | 1.0 | 1.00 | 4.0 | 6.5 | – | 250 | 5 | 0.7 | 22080.0205 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.60 | 6.0 | 11.5 | – | 250 | 6 | 1.2 | 22080.0206 |
| 8 | 6.50 | 8.5 | 9.0 | 1.0 | 1.90 | 8.0 | 12.5 | – | 250 | 8 | 2.8 | 22080.0208 |
| body from thermoplastic, ball from stainless steel, standard spring load – picture 2 | ||||||||||||
| 3 | 2.00 | 3.6 | 4.0 | 0.6 | 0.55 | 1.7 | 3.5 | -30 | 50 | 3 | 0.1 | 22080.0403 |
| 4 | 3.00 | 4.6 | 5.0 | 1.0 | 0.80 | 3.0 | 6.5 | -30 | 50 | 4 | 0.2 | 22080.0404 |
| 5 | 4.00 | 5.6 | 6.0 | 1.0 | 1.00 | 6.0 | 9.4 | -30 | 50 | 5 | 0.4 | 22080.0405 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.60 | 6.2 | 12.6 | -30 | 50 | 6 | 0.7 | 22080.0406 |
| 8 | 6.50 | 8.5 | 9.0 | 1.0 | 1.90 | 10.0 | 20.4 | -30 | 50 | 8 | 1.5 | 22080.0408 |
| 10 | 8.00 | 11.0 | 13.5 | 1.5 | 2.40 | 11.9 | 22.3 | -30 | 50 | 10 | 3.1 | 22080.0410 |
| 12 | 10.00 | 13.0 | 16.0 | 1.5 | 3.30 | 14.0 | 25.0 | -30 | 50 | 12 | 5.7 | 22080.0412 |
| body and ball from thermoplastic, standard spring load – picture 2 | ||||||||||||
| 4 | 3.00 | 4.6 | 5.0 | 1.0 | 0.80 | 3.0 | 6.5 | -30 | 50 | 4 | 0.1 | 22080.0604 |
| 5 | 4.00 | 5.6 | 6.0 | 1.0 | 1.00 | 6.0 | 9.4 | -30 | 50 | 5 | 0.2 | 22080.0605 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.60 | 6.2 | 12.6 | -30 | 50 | 6 | 0.3 | 22080.0606 |
| 8 | 6.50 | 8.5 | 9.0 | 1.0 | 1.90 | 10.0 | 20.4 | -30 | 50 | 8 | 0.6 | 22080.0608 |
| 10 | 8.00 | 11.0 | 13.5 | 1.5 | 2.40 | 11.9 | 22.3 | -30 | 50 | 10 | 1.4 | 22080.0610 |
| 12 | 10.00 | 13.0 | 16.0 | 1.5 | 3.30 | 14.0 | 25.0 | -30 | 50 | 12 | 2.4 | 22080.0612 |
Application Example
| Part Number | Related to |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Mounting Method | Tip Material | Body Material | Outside Dia./Thread M (mm) | Stroke S (mm) | Loosening Prevention | Main Body Surface Treatment | Tip Heat Treatment | Initial Load (Range) (N) | Initial Load (N) | Max. Load (N) | d1 | d2 (mm) | d3 (mm) | Body | Ball | l (mm) | l1 (mm) | l2 (mm) | l3 (mm) | Temperature max. (°C) | Temperature min. (°C) | Location hole (mm) | Spring Load type | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.88 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | - | 3 | 0.7 | No | No | No | 0.01 to 50 | 1.8 | 3.5 | 3 | 2.38 | 3.5 | - | Stainless Steel, hardened | 4 | - | ~ 0.6 | - | 250 | - | 3 | - | - | |||
0.84 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | - | 4 | 1 | No | No | No | 0.01 to 50 | 2.5 | 6 | 4 | 3 | 4.6 | - | Stainless Steel, hardened | 5 | - | ~ 0.9 | - | 250 | - | 4 | - | - | |||
0.84 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | - | 5 | 1.4 | No | No | No | 0.01 to 50 | 3 | 6.5 | 5 | 4 | 5.6 | - | Stainless Steel, hardened | 6 | - | ~ 0.9 | - | 250 | - | 5 | - | - | |||
0.87 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | - | 6 | 1.8 | No | No | No | 0.01 to 50 | 5.5 | 11.5 | 6 | 5 | 6.5 | - | Stainless Steel, hardened | 7 | - | ~ 1 | - | 250 | - | 6 | - | - | |||
1.08 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | - | 8 | 2.4 | No | No | No | 0.01 to 50 | 7 | 12.5 | 8 | 6.5 | 8.5 | - | Stainless Steel, hardened | 9 | - | ~ 1.1 | - | 250 | - | 8 | - | - | |||
1.49 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | - | 10 | 3.3 | No | No | No | 0.01 to 50 | 8.5 | 18.5 | 10 | 8.5 | 11 | - | Stainless Steel, hardened | 13 | - | ~ 1.5 | - | 250 | - | 10 | - | - | |||
1.78 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | - | 12 | 4 | No | No | No | 0.01 to 50 | 12 | 26.5 | 12 | 10 | 13 | - | Stainless Steel, hardened | 16 | - | ~ 2.3 | - | 250 | - | 12 | - | - | |||
2.64 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | Brass | 3 | 0.6 | No | No | No | 0.01 to 50 | 1.8 | 3.5 | 3 | 2.38 | 3.6 | - | Stainless Steel, hardened | 4 | - | ~ 0.6 | - | 250 | - | 3 | - | - | |||
1.48 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | Brass | 4 | 0.8 | No | No | No | 0.01 to 50 | 3 | 6 | 4 | 3 | 4.5 | - | Stainless Steel, hardened | 5 | - | ~ 1 | - | 250 | - | 4 | - | - | |||
1.53 € | 1 | 2 Days | 10 | Press Fitting | Stainless Steel | Brass | 5 | 1 | No | No | No | 0.01 to 50 | 4 | 6.5 | 5 | 4 | 5.5 | - | Stainless Steel, hardened | 6 | - | ~ 1 | - | 250 | - | 5 | - | - | |||
1.65 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | Brass | 6 | 1.6 | No | No | No | 0.01 to 50 | 6 | 11.5 | 6 | 5 | 6.5 | - | Stainless Steel, hardened | 7 | - | ~ 1 | - | 250 | - | 6 | - | - | |||
1.91 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | Brass | 8 | 1.9 | No | No | No | 0.01 to 50 | 8 | 12.5 | 8 | 6.5 | 8.5 | - | Stainless Steel, hardened | 9 | - | ~ 1 | - | 250 | - | 8 | - | - | |||
0.64 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | Thermoplastic POM | 3 | 0.55 | No | No | No | 0.01 to 50 | 1.7 | 3.5 | 3 | 2 | 3.6 | - | Stainless Steel, hardened | 4 | - | ~ 0.6 | - | 50 | -30 | 3 | - | - | |||
0.60 € | 1 | 2 Days | 10 | Press Fitting | Stainless Steel | Thermoplastic POM | 4 | 0.8 | No | No | No | 0.01 to 50 | 3 | 6.5 | 4 | 3 | 4.6 | - | Stainless Steel, hardened | 5 | - | ~ 1 | - | 50 | -30 | 4 | - | - | |||
0.61 € | 1 | 2 Days | 10 | Press Fitting | Stainless Steel | Thermoplastic POM | 5 | 1 | No | No | No | 0.01 to 50 | 6 | 9.4 | 5 | 4 | 5.6 | - | Stainless Steel, hardened | 6 | - | ~ 1 | - | 50 | -30 | 5 | - | - | |||
0.61 € | 1 | 2 Days | 10 | Press Fitting | Stainless Steel | Thermoplastic POM | 6 | 1.6 | No | No | No | 0.01 to 50 | 6.2 | 12.6 | 6 | 5 | 6.5 | - | Stainless Steel, hardened | 7 | - | ~ 1 | - | 50 | -30 | 6 | - | - | |||
0.74 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | Thermoplastic POM | 8 | 1.9 | No | No | No | 0.01 to 50 | 10 | 20.4 | 8 | 6.5 | 8.5 | - | Stainless Steel, hardened | 9 | - | ~ 1 | - | 50 | -30 | 8 | - | - | |||
1.26 € | 1 |
Same day
Stock | 10 | Press Fitting | Stainless Steel | Thermoplastic POM | 10 | 2.4 | No | No | No | 0.01 to 50 | 11.9 | 22.3 | 10 | 8 | 11 | - | Stainless Steel, hardened | 13.5 | - | ~ 1.5 | - | 50 | -30 | 10 | - | - | |||
1.65 € | 1 | 2 Days | 10 | Press Fitting | Stainless Steel | Thermoplastic POM | 12 | 3.3 | No | No | No | 0.01 to 50 | 14 | 25 | 12 | 10 | 13 | - | Stainless Steel, hardened | 16 | - | ~ 1.5 | - | 50 | -30 | 12 | - | - |
Loading...
Basic information
| Spring | Stainless Steel | Conflict Minerals free | yes | REACH compliant | yes |
|---|
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Mounting Method
-
Press Fitting
-
-
Body Material
- Stainless Steel
- Brass
- Thermoplastic POM
-
Outside Dia./Thread M(mm)
-
Stroke S(mm)
-
Loosening Prevention
- No
-
Main Body Surface Treatment
- No
-
Tip Heat Treatment
- No
-
Initial Load (Range)(N)
- 0.01 to 50
-
Initial Load(N)
-
d1
-
d2(mm)
-
d3(mm)
-
Body
-
Ball
- Stainless Steel, hardened
- Thermoplastic POM, white
-
l(mm)
-
l1(mm)
-
l2(mm)
-
l3(mm)
-
Temperature max.(°C)
- 50
- 250
-
Temperature min.(°C)
- -30
-
Location hole(mm)
-
Spring Load type
- Light
- Reinforced
-
Type
- 22080
-
Tip Material
- Stainless Steel
- Resin
-
Filter by CAD data type
- 3D
Filter by standard shipping days
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.