iglidur® G-Thrust washer (Form T)

Promotional pricing ends 31/12/2024
Volume Discount

iglidur® G bearings cover an extremely wide range of different requirements – they are truly “all-round”. The material is ideal for universal applications, a truly “all-round”. Typical applications include medium to high loads, medium sliding speeds and medium temperatures.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Product specification
Part Numbers
Catalog

iglidur^® G | The Classic All-rounder, Thrust Washer (Form T)

Product Information

Excellent price-performance ratio
iglidur^® G bearings cover an extremely wide range of different requirements – they are truly "all-round". The material is ideal for universal applications, a truly "all-round". Typical applications include medium to high load, medium sliding speeds and medium temperatures.
When to use it?
• Economical all-round performance bearing
• For low to average surface speeds
• When the bearing needs to run on different shaft materials
• For oscillating and rotational movements
When not to use it?
• When mechanical reaming of the wall surface is necessary
►iglidur^® M250
• When the highest wear resistance is required
►iglidur^® W300
• When universal chemical resistance is required
►iglidur^® X
• When temperatures are constantly higher than +130°C
►iglidur^®H
►iglidur^®X
►iglidur^®H370
• For underwater use
►iglidur^®H370
Typical application areas
• Agricultural machines
• Construction machinery industry
• Machine building
• Sports and leisure
• Automotive industry
• Mechatronics

Material Properties

General properties	Unit	iglidur^® G	Testing method
Density	g/cm³	1.46
Colour		dark grey
Max. moisture absorption at +23 °C/50 % r.h.	% weight	0.7	DIN 53495
Max. water absorption	% weight	4.0
Coefficient of sliding friction, dynamic, against steel	μ	0.08–0.15
pv value. max. (dry)	MPa · m/s	0.42
Mechanical properties
Flexural modulus	MPa	7,800	DIN 53457
Flexural strength at +20 °C	MPa	210	DIN 53452
Compressive strength	MPa	78
Max. recommended surface pressure (+20 °C)	MPa	80
Shore-D hardness		81	DIN 53505
Physical and thermal properties
Max. long-term application temperature	°C	+130
Max. short-term application temperature	°C	+220
Min. long-term application temperature	°C	–40
Heat conductivity	W/m · K	0.24	ASTM C 177
Coefficient of thermal expansion (at +23 °C)	K^–1 · 10^–5	9	DIN 53752
Electrical properties
Specific contact resistance	Ωcm	> 10¹³	DIN IEC 93
Surface resistance	Ω	> 10¹¹	DIN 53482

Dimensions

Thrust Washer (Form T)

ⓘDimensions according to ISO 3547-1 and special dimensions

Dimensions [mm]

d1	d2	s	d4	d5	h	d6	Part No.
+0.25	–0.25	–0.05	–0.12	+0.375	+0.2	+0.12
+0.25	–0.25	–0.05	+0.12	+0.125	–0.2	+0.12
4.0	8.0	0.5	⁴⁾	⁴⁾	0.2	8.0	GTM-0408-005
4.0	9.0	0.6	⁴⁾	⁴⁾	0.3	9.0	GTM-0409-006
4.0	9.0	1.6	⁴⁾	⁴⁾	0.3	9.0	GTM-0409-016
4.0	10.0	0.5	⁴⁾	⁴⁾	0.2	10.0	GTM-0410-005
4.0	11.0	0.5 (-0.06)	⁴⁾	⁴⁾	0.2	11.0	GTM-0411-005
5.0	9.5	0.6	⁴⁾	⁴⁾	0.3	9.5	GTM-0509-006
6.0	11.0	1.0	⁴⁾	⁴⁾	0.7	11.0	GTM-0611-010
6.0	12.0	1.5	⁴⁾	⁴⁾	1.0	12.0	GTM-0612-015
6.0	15.0	1.5	⁴⁾	⁴⁾	1.0	15.0	GTM-0615-015
6.0	20.0	1.5	13.0	1.5	1.0	20.0	GTM-0620-015
7.0	12.0	0.5	⁴⁾	⁴⁾	0.2	12.0	GTM-0712-005
7.0	13.0	0.5	⁴⁾	⁴⁾	0.2	13.0	GTM-0713-005
8.0	15.0	0.5	⁴⁾	⁴⁾	0.2	15.0	GTM-0815-005
8.0	15.0	1.5	⁴⁾	⁴⁾	1.0	15.0	GTM-0815-015
8.0	18.0	1.0	⁴⁾	⁴⁾	0.7	18.0	GTM-0818-010
8.0	18.0	1.5	13.0	1.5	1.0	18.0	GTM-0818-015
8.0	18.0	2.0	⁴⁾	⁴⁾	1.5	18.0	GTM-0818-020
9.0	13.0	1.0	⁴⁾	⁴⁾	0.7	13.0	GTM-0913-010
9.0	18.0	1.5	13.5	1.5	1.0	18.0	GTM-0918-015
10.0	17.8	0.5	⁴⁾	⁴⁾	0.2	17.8	GTM-1018-005
10.0	18.0	1.0	⁴⁾	⁴⁾	0.7	18.0	GTM-1018-010
10.0	18.0	1.5	⁴⁾	⁴⁾	1.0	18.0	GTM-1018-015
10.0	18.0	2.0	⁴⁾	⁴⁾	1.5	18.0	GTM-1018-020
10.0	20.0	1.5	⁴⁾	⁴⁾	0.7	20.0	GTM-1020-015
11.0	15.0	1.0	⁴⁾	⁴⁾	0.7	15.0	GTM-1115-010
11.0	27.0	0.5	⁴⁾	⁴⁾	0.2	27.0	GTM-1127-005
12.0	24.0	1.5	18.0	1.5	1.0	24.0	GTM-1224-015
12.2	30.0	1.5	⁴⁾	⁴⁾	1.0	30.0	GTM-1230-015
14.0	20.0	1.5	⁴⁾	⁴⁾	1.0	20.0	GTM-1420-015
14.0	26.0	1.5	20.0	2.0	1.0	26.0	GTM-1426-015
15.0	22.0	0.8	⁴⁾	⁴⁾	0.5	22.0	GTM-1522-008
15.0	19.0	0.8	⁴⁾	⁴⁾	0.5	19.0	GTM-1519-008
15.0	24.0	1.5	19.5	1.5	1.0	24.0	GTM-1524-015
15.0	24.0	2.75	⁴⁾	⁴⁾	2.0	24.0	GTM-1524-0275
16.0	28.0	1.0	⁴⁾	⁴⁾	0.7	28.0	GTM-1628-010
16.0	30.0	1.5	22.0	2.0	1.0	30.0	GTM-1630-015
18.0	32.0	1.5	25.0	2.0	1.0	32.0	GTM-1832-015
20.0	36.0	1.5	28.0	3.0	1.0	36.0	GTM-2036-015
22.0	30.0	1.5	⁴⁾	⁴⁾	1.0	30.0	GTM-2230-015
22.0	38.0	1.5	30.0	3.0	1.0	38.0	GTM-2238-015
24.0	42.0	1.5	33.0	3.0	1.0	42.0	GTM-2442-015
26.0	44.0	1.5	35.0	3.0	1.0	44.0	GTM-2644-015
28.5	35.8	0.5	⁴⁾	⁴⁾	0.2	35.8	GTM-2835-005
28.0	48.0	1.5	38.0	4.0	1.0	48.0	GTM-2848-015
32.0	45.8	1.0	⁴⁾	⁴⁾	0.7	45.8	GTM-3246-010
32.0	54.0	1.5	43.0	4.0	1.0	54.0	GTM-3254-015
38.0	62.0	1.5	50.0	4.0	1.0	62.0	GTM-3862-015
42.0	66.0	1.5	54.0	4.0	1.0	66.0	GTM-4266-015
48.0	60.0	2.0	⁴⁾	⁴⁾	1.5	60.0	GTM-4860-020
48.0	74.0	2.0	61.0	4.0	1.5	74.0	GTM-4874-020
52.0	78.0	2.0	65.0	4.0	1.5	78.0	GTM-5278-020
52.5	69.0	2.0	⁴⁾	⁴⁾	1.5	69.0	GTM-52569-020
62.0	78.0	2.0	⁴⁾	⁴⁾	1.5	78.0	GTM-6278-020
62.0	90.0	1.0	⁴⁾	⁴⁾	0.7	90.0	GTM-6290-010
62.0	90.0	2.0	76.0	4.0	1.5	90.0	GTM-6290-020
68.0	81.0	2.0	⁴⁾	⁴⁾	1.5	81.0	GTM-6881-020
78.0	114.0	1.5	⁴⁾	⁴⁾	1.0	114.0	GTM-78114-015
80.5	114.0	1.5	⁴⁾	⁴⁾	1.0	114.0	GTM-80114-015

⁴⁾ Design without fixing bore

Data to be displayed: 30; 45; 60

Part Number
GTM-0408-005
GTM-0409-006
GTM-0409-016
GTM-0410-005
GTM-0411-005
GTM-0509-006
GTM-0611-010
GTM-0612-015
GTM-0615-015
GTM-0620-015
GTM-0712-005
GTM-0713-005
GTM-0815-005
GTM-0815-015
GTM-0818-010
GTM-0818-015
GTM-0818-020
GTM-0913-010
GTM-0918-015
GTM-1018-005
GTM-1018-010
GTM-1018-015
GTM-1018-020
GTM-1020-015
GTM-1115-010
GTM-1127-005
GTM-1224-015
GTM-1230-015
GTM-1420-015
GTM-1426-015
GTM-1519-008
GTM-1522-008
GTM-1524-015
GTM-1524-0275
GTM-1628-010
GTM-1630-015
GTM-1832-015
GTM-2036-015
GTM-2230-015
GTM-2238-015
GTM-2442-015
GTM-2644-015
GTM-2835-005
GTM-2848-015
GTM-3246-010
GTM-3254-015
GTM-3862-015
GTM-4266-015
GTM-4860-020
GTM-4874-020
GTM-52569-020
GTM-5278-020
GTM-6278-020
GTM-6290-010
GTM-6290-020
GTM-6881-020
GTM-78114-015
GTM-80114-015

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (Ø)	O.D. D (Ø)	Thickness t (mm)	Recommended Shaft Tolerance	Maximum Allowable Velocity V (m/s)	Maximum Allowable PV Value Range
3.80 €	1	Available	Same day Stock	10	4	8	0.5	-	5	-
3.82 €	1	Available	3 Days	10	4	9	0.6	-	5	-
6.10 € 4.27 €	1	Available	Same day Stock	10	4	9	1.6	-	5	-
3.82 €	1	Available	3 Days	10	4	10	0.5	-	5	-
3.60 €	1	Available	4 Days	10	4	11	0.5	-	5	-
2.10 €	1	Available	Same day Stock	-	5	9.5	0.6	h9	1	0,3 – 1,0
4.04 €	1	Available	Same day Stock	10	6	11	1	-	5	-
4.04 €	1	Available	Same day Stock	10	6	12	1.5	-	5	-
4.04 €	1	Available	Same day Stock	10	6	15	1.5	-	5	-
4.10 €	1	Available	3 Days	10	6	20	1.5	-	5	-
4.10 €	1	Available	3 Days	10	7	12	0.5	-	5	-
4.10 €	1	Available	4 Days	-	7	13	0.5	h9	1	0,3 – 1,0
4.12 €	1	Available	Same day Stock	-	8	15	0.5	-	1	-
4.14 €	1	Available	Same day Stock	10	8	15	1.5	-	5	-
4.10 €	1	Available	Same day Stock	-	8	18	1	h9	1	0,3 – 1,0
4.14 €	1	Available	3 Days	10	8	18	1.5	-	5	-
4.60 €	1	Available	3 Days	10	8	18	2	-	5	-
4.38 €	1	Available	3 Days	10	9	13	1	-	5	-
4.10 €	1	Available	3 Days	-	9	18	1.5	h9	1	0,3 – 1,0
3.78 €	1	Available	Same day Stock	10	10	18	0.5	-	5	-
4.04 €	1	Available	Same day Stock	10	10	18	1	-	5	-
4.24 €	1	Available	3 Days	10	10	18	1.5	-	5	-
4.24 €	1	Available	3 Days	-	10	18	2	h9	1	0,3 – 1,0
4.24 €	1	Available	Same day Stock	10	10	20	1.5	-	5	-
2.10 €	1	Available	3 Days	10	11	15	1	-	5	-
4.36 €	1	Available	3 Days	10	11	27	0.5	-	5	-
4.20 €	1	Available	Same day Stock	10	12	24	1.5	-	5	-
4.44 €	1	Available	Same day Stock	10	12	30	1.5	-	5	-
4.22 €	1	Available	Same day Stock	-	14	20	1.5	h9	1	0,3 – 1,0
4.24 €	1	Available	3 Days	-	14	26	1.5	h9	1	0,3 – 1,0
4.20 €	1	Available	3 Days	10	15	19	0.8	-	5	-
4.24 €	1	Available	3 Days	-	15	22	0.8	h9	1	0,3 – 1,0
4.26 €	1	Available	5 Days	-	15	24	1.5	h9	1	0,3 – 1,0
5.30 €	1	Available	3 Days	-	15	24	2.75	h9	1	0,3 – 1,0
4.50 €	1	Available	3 Days	10	16	28	1	-	5	-
4.38 €	1	Available	Same day Stock	-	16	30	1.5	h9	1	0,3 – 1,0
4.60 €	1	Available	3 Days	10	18	32	1.5	-	5	-
4.84 €	1	Available	Same day Stock	10	20	36	1.5	-	5	-
4.40 €	1	Available	3 Days	10	22	30	1.5	-	5	-
4.98 €	1	Available	3 Days	10	22	38	1.5	-	5	-
5.28 €	1	Available	Same day Stock	-	24	42	1.5	h9	1	0,3 – 1,0
5.76 €	1	Available	3 Days	-	26	44	1.5	h9	1	0,3 – 1,0
4.42 €	1	Available	3 Days	-	28	35	0.5	h9	1	0,3 – 1,0
5.98 €	1	Available	3 Days	-	28	48	1.5	h9	1	0,3 – 1,0
5.28 €	1	Available	3 Days	10	32	46	1	-	5	-
6.32 €	1	Available	3 Days	-	32	54	1.5	h9	1	0,3 – 1,0
6.76 € 4.73 €	1	Available	Same day Stock	-	38	62	1.5	h9	1	0,3 – 1,0
7.44 €	1	Available	3 Days	10	42	66	1.5	-	5	-
7.66 €	1	Available	Same day Stock	10	48	60	2	-	5	-
9.26 €	1	Available	3 Days	-	48	74	2	h9	1	0,3 – 1,0
8.50 €	1	Available	3 Days	10	52.5	69	2	-	5	-
9.70 €	1	Available	3 Days	10	52	78	2	-	5	-
10.96 €	1	Available	3 Days	10	62	78	2	-	5	-
9.58 € 6.71 €	1	Available	Same day Stock	10	62	90	1	-	5	-
9.98 €	1	Available	3 Days	-	62	90	2	h9	1	0,3 – 1,0
9.94 €	1	Available	Same day Stock	-	68	81	2	h9	1	0,3 – 1,0
17.16 € 12.01 €	1	Available	Same day Stock	10	78	114	1.5	-	5	-
12.10 €	1	Available	3 Days	10	80	114	1.5	-	5	-

Products homepage

Basic information

Material	Resin	Environment	Standard / Foreign object Resistance / Vibration-Resistant / In Oil / In Water / In Seawater / In Chemical	Recommended Housing Hole Tolerance	H7
Maximum Allowable Surface Pressure P(N/mm2)	80	Maximum Allowable PV Value(N/mm2·m/s)	0.42	Resin Group	High Performance Polymer Group
Lubrication Condition	Unlubricated

Configure

58Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

I.D. d(Ø)
4

5

6

7

8

9

10

11

12

14

15

16

18

20

22

24

26

28

32

38

42

48

52

52.5

62

68

78

80
Clear
O.D. D(Ø)
8

9

9.5

10

11

12

13

15

18

19

20

22

24

26

27

28

30

32

35

36

38

42

44

46

48

54

60

62

66

69

74

78

81

90

114
Clear
Thickness t(mm)
0.5

0.6

0.8

1

1.5

1.6

2

2.75
Clear
Recommended Shaft Tolerance
- h9
Clear
Maximum Allowable Velocity V(m/s)
- 1
- 5
Clear
Maximum Allowable PV Value Range
- 0,3 – 1,0
Clear
Type
- GTM
Clear
Filter by CAD data type
- 3D
Clear

Filter by standard shipping days

All

Same day

3 Days or Less

4 Days or Less

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

: Technical Inquiry

iglidur® G-Thrust washer (Form T)

iglidur^® G | The Classic All-rounder, Thrust Washer (Form T)

Product Information

Material Properties

Dimensions

Basic information

Tech Support

Fizetési mód

Igény szerinti gyártás

Nézetváltás

Tanúsítványok

Globális MISUMI

Közösségi média

Jogi nyilatkozat

iglidur® G-Thrust washer (Form T)

iglidur® G | The Classic All-rounder, Thrust Washer (Form T)

Product Information

Material Properties

Dimensions

Basic information

Tech Support

Fizetési mód

Igény szerinti gyártás

Nézetváltás

Tanúsítványok

Globális MISUMI

Közösségi média

Jogi nyilatkozat

iglidur^® G | The Classic All-rounder, Thrust Washer (Form T)