Plain bearing bushes with flange / plastic (iglidur) / XFM (XFM-1820-22)

Promotional pricing ends 31/12/2024
Volume Discount

IGUS

Product Details:

Manufacturer part number: XFM-1820-22

Brand: IGUS

Price: 8.82 €

Delivery time: 3 Days

Technical Data:

Type: -

Inner Diameter d1: 18 mm

O.D. d2: 20 mm

Overall Length b1: 15 mm

Maximum Allowable PV Value Range: - N/mm²•m/s

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

XFM-1820-22

Product specification
Part Numbers
Catalog

iglidur^® X | The Chemical and Temperature Specialist, Flange Bearing (Form F)

Product Information

Up to 150 MPa static
iglidur^® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur^® X is designed for higher speeds than other iglidur^® bearings.
When to use it?
• For pressure loads up to 150 MPa
• For linear movements with stainless steel at high temperatures
• Universal resistance to chemicals
• Temperature resistant from –100 °C to +250 °C in continuous operation (short-term to +315 °C)
• Very low moisture absorption
• High wear resistance over the entire temperature range
When not to use it?
• For very low wear at high loads
►iglidur^® Q
►iglidur^® Z
• For economical underwater applications
►iglidur^® H
►iglidur^® H370
• For edge pressure
►iglidur^® Z
Typical application areas
• Beverage technology
• Woodworking
• Plastic processing industry
• Aerospace engineering
• Cleanroom

Material Properties

General properties	Unit	iglidur^® X	Testing method
Density	g/cm³	1.44
Colour		black
Max. moisture absorption at +23 °C/50 % r.h.	% weight	0.1	DIN 53495
Max. water absorption	% weight	0.5
Coefficient of sliding friction, dynamic, against steel	μ	0.09–0.27
pv value, max. (dry)	MPa · m/s	1.32
Mechanical properties
Flexural modulus	MPa	8,100	DIN 53457
Flexural strength at +20 °C	MPa	170	DIN 53452
Compressive strength	MPa	100
Max. recommended surface pressure (+20 °C)	MPa	150
Shore-D hardness		85	DIN 53505
Physical and thermal properties
Max. long-term application temperature	°C	+250
Max. short-term application temperature	°C	+315
Min. long-term application temperature	°C	–100
Heat conductivity	W/m · K	0.6	ASTM C 177
Coefficient of thermal expansion (at +23 °C)	K^–1 · 10^–5	5	DIN 53752
Electrical properties⁵⁾
Specific contact resistance	Ωcm	< 10⁵	DIN IEC 93
Surface resistance	Ω	< 10³	DIN 53482

5) The good conductivity of this plastic material under certain circumstances can favour the generation of corrosion on the metallic contact components.

Dimensions

Flange Bearing (Form F)

²⁾ Thickness < 1 mm: chamfer = 20°

Chamfer in relation to the d1
d1 [mm]:	Ø 1–6	Ø 6–12	Ø 12–30	Ø > 30
f [mm]:	0.3	0.5	0.8	1.2

Dimensions [mm]

d1	d1-	d2	d3	b1	b2	Part No.
	Tolerance³⁾		d13	h13	–0.14
2.0	+0.006 +0.046	4.0	6.0	3.0	1.0	XFM-020406-03
3.0	+0.006 +0.046	4.5	7.5	5.0	0.75	XFM-0304-05
4.0	+0.010 +0.058	5.5	9.5	4.0	0.75	XFM-0405-04
4.0		5.5	9.5	6.0	0.75	XFM-0405-06
4.0		5.5	8.0	6.0	0.75	XFM-040508-06
5.0		7.0	11.0	5.0	1.0	XFM-0507-05
6.0		8.0	12.0	4.0	1.0	XFM-0608-04
6.0		8.0	12.0	8.0	1.0	XFM-0608-08
6.0		8.0	12.0	10.0	1.0	XFM-0608-10
8.0	+0.013 +0.071	10.0	15.0	5.5	1.0	XFM-0810-05
8.0		10.0	15.0	7.5	1.0	XFM-0810-07
8.0		10.0	15.0	8.0	1.0	XFM-0810-08
8.0		10.0	15.0	9.0	1.0	XFM-0810-09
8.0		10.0	12.0	4.0	1.0	XFM-081012-04
8.0		10.0	14.0	31.5	1.0	XFM-081014-31
9.0		11.0	15.0	18.0	0.5	XFM-0911-18
10.0		12.0	18.0	5.0	1.0	XFM-1012-05
10.0		12.0	18.0	6.0	1.0	XFM-1012-06
10.0		12.0	18.0	7.0	1.0	XFM-1012-07
10.0		12.0	15.0	8.0	1.0	XFM-1012-08
10.0		12.0	18.0	9.0	1.0	XFM-1012-09
10.0		12.0	18.0	12.0	1.0	XFM-1012-12
10.0		12.0	18.0	15.0	1.0	XFM-1012-15
10.0		12.0	18.0	17.0	1.0	XFM-1012-17
10.0		12.0	18.0	18.0	1.0	XFM-1012-18
10.0		12.0	15.0	22.0	1.0	XFM-1012-22
10.0		12.0	18.0	25.0	1.0	XFM-1012-25
12.0	+0.016 +0.086	14.0	20.0	5.5	1.0	XFM-1214-055
12.0		14.0	20.0	7.0	1.0	XFM-1214-07
12.0		14.0	20.0	9.0	1.0	XFM-1214-09
12.0		14.0	20.0	12.0	1.0	XFM-1214-12
12.0		14.0	20.0	15.0	1.0	XFM-1214-15
12.0		14.0	20.0	17.0	1.0	XFM-1214-17
12.0		14.0	18.0	3.9	1.0	XFM-121418-039
12.0	+0.016 +0.086	14.0	18.0	5.9	1.0	XFM-121418-059
14.0		16.0	22.0	10.0	1.0	XFM-1416-10
14.0		16.0	22.0	12.0	1.0	XFM-1416-12
14.0		16.0	22.0	17.0	1.0	XFM-1416-17
15.0		17.0	23.0	6.0	1.0	XFM-1517-06
15.0		17.0	23.0	9.0	1.0	XFM-1517-09
15.0		17.0	23.0	12.0	1.0	XFM-1517-12
15.0		17.0	23.0	17.0	1.0	XFM-1517-17
16.0		18.0	24.0	12.0	1.0	XFM-1618-12
16.0		18.0	24.0	17.0	1.0	XFM-1618-17
18.0		20.0	26.0	12.0	1.0	XFM-1820-12
18.0		20.0	26.0	17.0	1.0	XFM-1820-17
18.0		20.0	26.0	22.0	1.0	XFM-1820-22
20.0	+0.020 +0.104	23.0	30.0	6.5	1.5	XFM-2023-065
20.0		23.0	30.0	7.5	1.5	XFM-2023-075
20.0		23.0	30.0	11.0	1.5	XFM-2023-11
20.0		23.0	30.0	16.5	1.5	XFM-2023-16
20.0		23.0	30.0	21.0	1.5	XFM-2023-21
25.0		28.0	35.0	11.5	1.5	XFM-2528-11
25.0		28.0	35.0	13.5	1.5	XFM-2528-13
25.0		28.0	35.0	16.5	1.5	XFM-2528-16
25.0		28.0	35.0	21.0	1.5	XFM-2528-21
25.0		28.0	33.0	8.0	1.0	XFM-252833-08
27.0		30.0	38.0	20.0	1.5	XFM-2730-20
30.0		34.0	42.0	16.0	2.0	XFM-3034-16
30.0		34.0	42.0	26.0	2.0	XFM-3034-26
30.0		34.0	42.0	40.0	2.0	XFM-3034-40
32.0	+0.025 +0.125	36.0	45.0	15.0	2.0	XFM-3236-15
32.0		36.0	45.0	26.0	2.0	XFM-3236-26
35.0		39.0	47.0	16.0	2.0	XFM-3539-16
35.0		39.0	47.0	26.0	2.0	XFM-3539-26
40.0		44.0	52.0	22.0	2.0	XFM-4044-22
40.0		44.0	52.0	30.0	2.0	XFM-4044-30
40.0		44.0	52.0	40.0	2.0	XFM-4044-40
45.0		50.0	58.0	50.0	2.0	XFM-4550-50
50.0		55.0	63.0	40.0	2.0	XFM-5055-40
60.0	+0.030 +0.150	65.0	73.0	40.0	2.0	XFM-6065-40
70.0		75.0	83.0	40.0	2.0	XFM-7075-40
75.0		80.0	88.0	50.0	2.0	XFM-7580-50

³⁾After press-fit.

Data to be displayed: 30; 45; 60

Part Number
XFM-1820-22

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Type	Inner Diameter d1 (mm)	O.D. d2 (mm)	Overall Length b1 (mm)	Maximum Allowable PV Value Range (N/mm²•m/s)	Max. Allowable Velocity V (m/s)	Recommended Shaft Tolerance	Thickness t (mm)	Operating Temperature Range (°C)	Flange Outer Diameter d3 (mm)
	8.82 €	1	Available	3 Days	10	-	18	20	15	-	10	-	1	-	-

Products homepage

Basic information

Resin Group	High Performance Polymer Group	Environment	Standard / Heat Resistant / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical	Maximum Allowable PV Value(N/mm²·m/s)	1.32
Max. Allowable Surface Pressure P(N/mm²)	150	Recommended Housing Hole Tolerance	H7	Lubrication Condition	Unlubricated

This page is Plain bearing bushes with flange / plastic (iglidur) / XFM, part number XFM-1820-22.
You can find the detail information about specifications and dimensions on part number XFM-1820-22.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- Flanged Type
Clear
Maximum Allowable PV Value Range(N/mm²•m/s)
- 1.1 to 2.0
Clear
Recommended Shaft Tolerance
- h9
Clear
Flange Outer Diameter d3(mm)
6

7.5

8

9.5

11

12

14

15

18

20

22

23

24

26

30

33

35

38

42

45

52

58

63

73

83

88
Clear
Type
- XFM
Clear
Inner Diameter d1(mm)
2

3

4

5

6

8

10

12

14

15

16

18

20

25

27

30

32

35

40

45

50

60

70

75
Clear
O.D. d2(mm)
4

4.5

5.5

7

8

10

12

14

16

17

18

20

23

28

30

34

36

39

44

50

55

65

75

80
Clear
Overall Length b1(mm)
3

3.9

4

5

5.5

5.9

6

7.5

8

9

10

11

12

13.5

15

16

16.5

17

18

20

21

22

26

30

31.5

40

50
Clear
Max. Allowable Velocity V(m/s)
1.5

10
Clear
Thickness t(mm)
1

1.5

2

2.5
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

2 Days or Less

3 Days or Less

4 Days or Less

5 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
XFM-0405-06
XFM-040508-06
XFM-0507-05
XFM-2023-065
XFM-2023-075
XFM-2023-11

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Type	Inner Diameter d1 (mm)	O.D. d2 (mm)	Overall Length b1 (mm)	Maximum Allowable PV Value Range (N/mm²•m/s)	Max. Allowable Velocity V (m/s)	Recommended Shaft Tolerance	Thickness t (mm)	Operating Temperature Range (°C)	Flange Outer Diameter d3 (mm)
6.84 €	1	Available	Same day Stock	10	Flanged Type	4	5.5	6	1.1 to 2.0	1.5	h9	-	-100～250	9.5
6.74 €	1	Available	2 Days	10	Flanged Type	4	5.5	6	1.1 to 2.0	1.5	h9	-	-100～250	8
6.94 €	1	Available	Same day Stock	10	Flanged Type	5	7	5	1.1 to 2.0	1.5	h9	-	-100～250	11
8.82 €	1	Available	Same day Stock	10	-	20	23	15	-	10	-	1.5	-	-
8.88 €	1	Available	3 Days	10	Flanged Type	20	23	7.5	1.1 to 2.0	1.5	h9	1.5	-100～250	30
9.06 €	1	Available	3 Days	10	Flanged Type	20	23	11	1.1 to 2.0	1.5	h9	1.5	-100～250	30

Tech Support

: Technical Inquiry

Plain bearing bushes with flange / plastic (iglidur) / XFM (XFM-1820-22)

Product Details:

Technical Data: