LD Holder (To-Package Type)
[Features]
· A To-Package type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.
· For common anodes and common cathodes, etc., configure by replacing the jumper pins.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.
· A To-Package type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.
· For common anodes and common cathodes, etc., configure by replacing the jumper pins.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Loading...
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.