Megerősítve

LD Holder (Chip Carrier Type) (F127)

LD Holder (Chip Carrier Type) F127

Cikkszám:

F127
Törlés
Mennyiség:
Loading...

Cikkszámlista

Elemek száma
Cikkszám
F127

LD injection direction

Minimális rendelési mennyiség
One direction on front
1 darab
Egységár (HÉA nélkül)(egységár adóval)
Normál feladási dátum
665.13 €
( 791.50 € )
11 munkanapok

Részletes információk

Alapvető információk

[Features]
· A Chip Carrier type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
· There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

A cikkszám megerősítésre került