Szűrési feltételek
  • Outer Diameter (D)(φ)
  • Flute Length (ℓ)(mm)
  • Number of Flutes(sheet)
  • Coating
    • Shank Diameter (d)(mm)
    • Overall Length (L)(mm)
    • Processing Applications
    • Corner (C)(mm)
        [0.1–3/0.1mm egység]
      • Becsült szállítási napok
        • Minden
        • 7 munkanapok belül
        • 9 munkanapok belül

      Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

      Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
      • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
      • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

      Cikkszám:

      Befejezetlen: 85 javaslat található.
        Mennyiség:

        Vázlatrajz

        Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill:Related Image

        Cikkszámlista

        Elemek száma

        Outer Diameter (D)

        (φ)

        Work Material

        Flute Length (ℓ)

        (mm)

        Number of Flutes

        (sheet)

        Coating

        Shank Diameter (d)

        (mm)

        Overall Length (L)

        (mm)

        Processing Applications

        Corner (C)

        (mm)

        Figure

        Minimális rendelési mennyiség
        4
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        6
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        4.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        6.75
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        7.5
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        8.25
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        1
        1 darab
        6
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        9
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        2
        1 darab
        8
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        12
        2
        Non-Coated
        8
        60
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.4
        2
        1 darab
        10
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        15
        2
        Non-Coated
        10
        70
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        12
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        18
        2
        Non-Coated
        12
        75
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        16
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        24
        2
        Non-Coated
        16
        100
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        20
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        30
        2
        Non-Coated
        20
        105
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        4
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        16
        2
        Non-Coated
        6
        60
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        20
        2
        Non-Coated
        6
        60
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        6
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        24
        2
        Non-Coated
        6
        60
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        2
        1 darab
        8
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        32
        2
        Non-Coated
        8
        100
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.4
        2
        1 darab
        10
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        40
        2
        Non-Coated
        10
        100
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        12
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        48
        2
        Non-Coated
        12
        100
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        2
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        6
        2
        Non-Coated
        4
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.5
        1
        1 darab
        2.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        7.5
        2
        Non-Coated
        4
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.5
        1
        1 darab
        2.8
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        8.4
        2
        Non-Coated
        4
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.5
        1
        1 darab
        3
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        9
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.7
        1
        1 darab
        3.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        10.5
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.7
        1
        1 darab
        4
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        12
        2
        Non-Coated
        6
        50
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        4.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        13.5
        2
        Non-Coated
        6
        50
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        15
        2
        Non-Coated
        6
        55
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        16.5
        2
        Non-Coated
        6
        55
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        1
        1 darab
        6
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        18
        2
        Non-Coated
        6
        60
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        2
        1 darab
        8
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        24
        2
        Non-Coated
        8
        70
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.4
        2
        1 darab
        10
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        30
        2
        Non-Coated
        10
        80
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        12
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        36
        2
        Non-Coated
        12
        85
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        16
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        48
        2
        Non-Coated
        16
        110
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        20
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        60
        2
        Non-Coated
        20
        130
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        4
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        14
        2
        Non-Coated
        6
        50
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        17.5
        2
        Non-Coated
        6
        55
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        6
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        21
        2
        Non-Coated
        6
        60
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        2
        1 darab
        8
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        28
        2
        Non-Coated
        8
        70
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.4
        2
        1 darab
        10
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        35
        2
        Non-Coated
        10
        80
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        12
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        42
        2
        Non-Coated
        12
        95
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        2
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        4
        2
        Non-Coated
        4
        40
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.5
        1
        1 darab
        2.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        5
        2
        Non-Coated
        4
        40
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.5
        1
        1 darab
        2.8
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        5.6
        2
        Non-Coated
        4
        40
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.5
        1
        1 darab
        3
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        6
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.7
        1
        1 darab
        3.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        7
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 0.7
        1
        1 darab
        4
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        8
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        4.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        9
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        10
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5.5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        11
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        1
        1 darab
        6
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        12
        2
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        2
        1 darab
        8
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        16
        2
        Non-Coated
        8
        55
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.4
        2
        1 darab
        10
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        20
        2
        Non-Coated
        10
        65
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        12
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        24
        2
        Non-Coated
        12
        75
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        16
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        32
        2
        Non-Coated
        16
        105
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        20
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        40
        2
        Non-Coated
        20
        110
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        4
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        10
        2
        Non-Coated
        6
        50
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        5
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        12.5
        2
        Non-Coated
        6
        55
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        6
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        15
        2
        Non-Coated
        6
        60
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.2
        2
        1 darab
        8
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        20
        2
        Non-Coated
        8
        70
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 1.4
        2
        1 darab
        10
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        25
        2
        Non-Coated
        10
        80
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        12
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        30
        2
        Non-Coated
        12
        85
        Flat Surface / Side Surface / Groove / Inclined Cutting
        0.1 ~ 3
        2
        1 darab
        3
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        4.5
        4
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Inclined Cutting
        0.1 ~ 0.7
        1
        1 darab
        4
        General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
        6
        4
        Non-Coated
        6
        45
        Flat Surface / Side Surface / Inclined Cutting
        0.1 ~ 1
        1
        1 darab
        Egységár (HÉA nélkül)(egységár adóval)
        Normál feladási dátum
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok
        -
        ( - )
        7 munkanapok

        Részletes információk

        Alapvető információk

        [Features]
        -Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps
        -Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

        Specifikációk és ár

        Specifications

        Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill:Related Image

        Model Number
        SEC-CEM2B / TSC-CEM2B
        SEC-CEM4B
        / TSC-CEM4B (1.5 D Blade Length Type)
        Flute Diameter
        D
        Corner C
        0.1 mm Increment Designation
        Blade Length
        Overall Length
        L
        Shank Diameter
        d
        Figure
        20.1 ~ 0.534041
        2.50.1 ~ 0.53.754041
        30.1 ~ 0.74.54561
        3.50.1 ~ 0.75.254561
        40.1 ~ 1.064561
        4.50.1 ~ 1.06.754561
        50.1 ~ 1.07.54561
        5.50.1 ~ 1.08.254561
        60.1 ~ 1.294562
        80.1 ~ 1.4126082
        100.1 ~ 3.01570102
        120.1 ~ 3.01875122
        160.1 ~ 3.024100162
        200.1 ~ 3.030105202

        Model Number
        SEC-CEM2S / TSC-CEM2S
        SEC-CEM4S
        /TSC-CEM4S (2 D Blade Length Type)
        Flute Diameter
        D
        Corner C
        0.1 mm Increment Designation
        Blade Length
        Overall Length
        L
        Shank Diameter
        d
        Figure
        20.1 ~ 0.544041
        2.50.1 ~ 0.554041
        2.80.1 ~ 0.55.64041
        30.1 ~ 0.764561
        3.50.1 ~ 0.774561
        40.1 ~ 1.084561
        4.50.1 ~ 1.094561
        50.1 ~ 1.0104561
        5.50.1 ~ 1.0114561
        60.1 ~ 1.2124562
        80.1 ~ 1.4165582
        100.1 ~ 3.02065102
        120.1 ~ 3.02475122
        160.1 ~ 3.032100162
        200.1 ~ 3.040105202

        Model Number
        SEC-CEM2SR / TSC-CEM2SR (2.5 D Blade Length Type)
        Flute Diameter
        D
        Corner C
        0.1 mm Increment Designation
        Blade Length
        Overall Length
        L
        Shank Diameter
        d
        Figure
        30.1 ~ 0.77.54561
        40.1 ~ 1.0105061
        50.1 ~ 1.012.55561
        60.1 ~ 1.2156062
        80.1 ~ 1.4207082
        100.1 ~ 3.02580102
        120.1 ~ 3.03085122

        Model Number
        SEC-CEM2R / TSC-CEM2R
        SEC-CEM4R
        / TSC-CEM4R (3D Blade Length Type)
        Flute Diameter
        D
        Corner C
        0.1 mm Increment Designation
        Blade Length
        Overall Length
        L
        Shank Diameter
        d
        Figure
        20.1 ~ 0.564541
        2.50.1 ~ 0.57.54541
        2.80.1 ~ 0.58.44541
        30.1 ~ 0.794561
        3.50.1 ~ 0.710.54561
        40.1 ~ 1.0125061
        4.50.1 ~ 1.013.55061
        50.1 ~ 1.0155561
        5.50.1 ~ 1.016.55561
        60.1 ~ 1.2186062
        80.1 ~ 1.4247082
        100.1 ~ 3.03080102
        120.1 ~ 3.03685122
        160.1 ~ 3.048115162
        200.1 ~ 3.060125202

        Model Number
        SEC-CEM2RL / TSC-CEM2RL (3.5 D Blade Length Type)
        Flute Diameter
        D
        Corner C
        0.1 mm Increment Designation
        Blade Length
        Overall Length
        L
        Shank Diameter
        d
        Figure
        30.1 ~ 0.710.54561
        40.1 ~ 1.0145061
        50.1 ~ 1.017.55561
        60.1 ~ 1.2216062
        80.1 ~ 1.4287082
        100.1 ~ 3.03580102
        120.1 ~ 3.04295122

        Model Number
        SEC-CEM2L / TSC-CEM2L (4 D Blade Length Type)
        Flute Diameter
        D
        Corner C
        0.1 mm Increment Designation
        Blade Length
        Overall Length
        L
        Shank Diameter
        d
        Figure
        30.1 ~ 0.7125061
        40.1 ~ 1.0166061
        50.1 ~ 1.0206061
        60.1 ~ 1.2246062
        80.1 ~ 1.43210082
        100.1 ~ 3.040100102
        120.1 ~ 3.048100122


        For Cutting Conditions, Refer to >>Click here.