[Features]
General 2-flute cutter with regular flute length and flute radius
-Radius cutting edge also effectively suppresses chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
Model Number
TSC-CR-EM2R
Outer Diameter D |
Radius R (Manufactured products designated in 0.1 mm increment) |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
|||||||
1 | 0.1 | 0.2 | 0.3 | 3 | 45 | 4 | 1 | ● | |||||
1.5 | 0.1 | 0.2 | 0.3 | 4.5 | 45 | 4 | 1 | ● | |||||
2 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 6 | 45 | 4 | 1 | ● | |||
2.5 | 0.1 - 0.5 | 7.5 | 45 | 4 | 1 | □ | |||||||
2.8 | 0.1 - 0.5 | 8.4 | 45 | 4 | 1 | □ | |||||||
3 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 9 | 45 | 6 | 1 | ● | |||
0.6 - 0.7 | □ | ||||||||||||
3.5 | 0.1 - 0.7 | 10.5 | 45 | 6 | 1 | □ | |||||||
4 | 0.2 | 0.3 | 0.4 | 0.5 | 1 | 12 | 50 | 6 | 1 | ● | |||
0.1 - 0.9 | □ | ||||||||||||
4.5 | 0.1 - 1.2 | 13.5 | 50 | 6 | 1 | □ | |||||||
5 | 0.5 | 1 | 15 | 55 | 6 | 1 | ● | ||||||
0.1 ~ 1.5 | □ | ||||||||||||
5.5 | 0.1 ~ 1.7 | 16.5 | 55 | 6 | 1 | □ | |||||||
6 | 0.2 | 0.3 | 0.5 | 1 | 2 | 18 | 60 | 6 | 2 | ● | |||
0.1 ~ 1.9 | □ | ||||||||||||
8 | 0.3 | 0.5 | 1 | 2 | 24 | 70 | 8 | 2 | ● | ||||
0.1 ~ 3.0 | □ | ||||||||||||
10 | 0.5 | 1 | 2 | 3 | 30 | 80 | 10 | 2 | ● | ||||
0.1 - 2.9 | □ | ||||||||||||
12 | 1 | 2 | 3 | 36 | 85 | 12 | 2 | ● | |||||
0.1 - 2.9 | □ | ||||||||||||
16 | 0.1 ~ 3.0 | 48 | 115 | 16 | 2 | □ | |||||||
20 | 0.1 ~ 3.0 | 60 | 125 | 20 | 2 | □ |
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 2-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.