Cikkszám:
javaslat található.Cikkszám |
---|
Egységár (HÉA nélkül)(egységár adóval) | Normál feladási dátum |
---|
- ( - ) | 8 munkanapok |
- ( - ) | 8 munkanapok |
- ( - ) | 8 munkanapok |
- ( - ) | 8 munkanapok |
- ( - ) | 7 munkanapok |
- ( - ) | 7 munkanapok |
- ( - ) | 7 munkanapok |
- ( - ) | 7 munkanapok |
48.80 € ( 58.07 € ) | 5 munkanapok |
45.31 € ( 53.92 € ) | 5 munkanapok |
50.99 € ( 60.68 € ) | 5 munkanapok |
42.33 € ( 50.37 € ) | 5 munkanapok |
63.58 € ( 75.66 € ) | 5 munkanapok |
68.89 € ( 81.98 € ) | 5 munkanapok |
87.32 € ( 103.91 € ) | 5 munkanapok |
[Features]
-Radius end mill
-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Radius cutting edge is also effective in suppressing chipping
-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time
Model Number
TSC-CR-HEM4B (Stocked Product) / T-TSC-HEM4B (Manufactured Product)
Outer Diameter D |
Radius | R Select | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
CR 0.1 mm Increment Designation |
|||||||
3 |
0.5 |
4.5 | 60 | 6 | 1 | ● | |
4 |
0.5 |
6 | 60 | 6 | 1 | ● | |
0.1 ~ 0.4 | □ | ||||||
5 |
0.5 |
7.5 | 60 | 6 | 1 | ● | |
0.1 ~ 0.4 | □ | ||||||
6 |
0.5 |
9 | 60 | 6 | 2 | ● | |
0.1 ~ 1.0 | □ | ||||||
8 |
1 |
12 | 75 | 8 | 2 | ● | |
0.1 ~ 1.5 | □ | ||||||
10 |
1 |
15 | 80 | 10 | 2 | ● | |
0.1 ~ 2.0 | □ | ||||||
12 |
1 |
18 | 100 | 12 | 2 | ● | |
0.1 ~ 2.5 | □ | ||||||
16 | 0.1 ~ 3.0 | 24 | 110 | 16 | 2 | □ |
[ ! ]The flute length (ℓ) and total length (L) are approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here. for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● A multi-functional end mill product with added curvature.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
● The radial blade tip is useful to prevent chipping.
● Has a stubby blade with a length 1.5 times greater than the blade diameter, suppressing chatter while machining bottom surfaces.