TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

Click on this image to zoom in.

Volume Discount

[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.

TS
High-Hardness Steel
4 Flutes
S (Short)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
Part Numbers
Specification and price
Features and examples

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model:Related Image

Data to be displayed: 30; 45; 60

Part Number
TSC-MCR-LS-HFEM4S4
TSC-MCR-LS-HFEM4S6
TSC-MCR-LS-HFEM4S8
TSC-MCR-LS-HFEM4S10
TSC-MCR-LS-HFEM4S12

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Outer Diameter (D) (φ)	R Size (mm)	Flute Length (ℓ) (mm)	Overall Length (L) (mm)	Shank Diameter (d) (mm)	Length Under Neck (ℓ1) (mm)	Figure	Shoulder Radius R1 (mm)	Base Radius R2 (mm)	Approximate R-Value (mm)	Under Neck Diameter d1 (mm)
93.03 €	1	Available	5 Days	4	0.813	8	80	6	35	1	0.5	4	0.813	3.8
127.80 €	1	Available	5 Days	6	1.219	10	120	6	70	1	0.5	9	1.219	5.7
98.11 €	1	Available	5 Days	8	1.625	16	135	8	85	2	1	12	1.625	7.6
188.99 €	1	Available	5 Days	10	2.031	20	150	10	100	2	1.5	15	2.031	9.5
251.74 €	1	Available	5 Days	12	2.438	24	160	12	108	2	1.5	18	2.438	11.5

Specifications

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model:Related Image

Model Number
TSC-MCR-LS-HFEM4S (4 Flutes)

Outer Diameter D	Shoulder Radius R1	Base Radius R2	Approximate R-Value	Flute Length ℓ	Under Neck Diameter d1	Length Under Neck ℓ1	Overall Length L	Shank Diameter d	Figure
Outer Diameter D	Shoulder Radius R1	Base Radius R2	Approximate R-Value	Flute Length ℓ	Under Neck Diameter d1	Length Under Neck ℓ1	Overall Length L	Shank Diameter d	Figure
4	0.5	4	0.813	8	3.8	35	80	6	1
6	0.5	9	1.219	10	5.7	70	120	6	1
8	1	12	1.625	16	7.6	85	135	8	2
10	1.5	15	2.031	20	9.5	100	150	10	2
12	1.5	18	2.438	24	11.5	108	160	12	2

For Cutting Conditions, Refer to >>Click here.

More Information

● The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
● The long neck models not only avoid tool interference, but can also achieve increased efficiency when machining deep grooves.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. Ideal for high speed machining and dry machining of anything from raw carbon steel materials to heat-treated / high hardness steel.
[ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding.

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model:Related Image

Basic information

Work Material	General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Stainless Steel / Cast Iron	Number of Flutes(sheet)	4	Model	High-Feed Radius
Processing Applications	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Coating	For High Hardness (Silicone-Based)	Torsion Angle (θ)	Powerful Helix (45° to 60°)
Additional Classification	Stocked Product