Szűrési feltételek
  • Outer Diameter (D)(φ)
  • R Size(mm)
  • Flute Length (ℓ)(mm)
  • Overall Length (L)(mm)
  • Shank Diameter (d)(mm)
  • Length Under Neck (ℓ1)(mm)
  • Becsült szállítási napok
    • Minden
    • 5 munkanapok belül

TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

Cikkszám:

Befejezetlen: 5 javaslat található.
    Mennyiség:

    Vázlatrajz

     TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model:Related Image

    Cikkszámlista

    Elemek száma

    Outer Diameter (D)

    (φ)

    R Size

    (mm)

    Flute Length (ℓ)

    (mm)

    Overall Length (L)

    (mm)

    Shank Diameter (d)

    (mm)

    Length Under Neck (ℓ1)

    (mm)

    Figure

    Shoulder Radius R1

    (mm)

    Base Radius R2

    (mm)

    Approximate R-Value

    (mm)

    Under Neck Diameter d1

    (mm)

    Minimális rendelési mennyiség
    4
    0.813
    8
    80
    6
    35
    1
    0.5
    4
    0.813
    3.8
    1 darab
    6
    1.219
    10
    120
    6
    70
    1
    0.5
    9
    1.219
    5.7
    1 darab
    8
    1.625
    16
    135
    8
    85
    2
    1
    12
    1.625
    7.6
    1 darab
    10
    2.031
    20
    150
    10
    100
    2
    1.5
    15
    2.031
    9.5
    1 darab
    12
    2.438
    24
    160
    12
    108
    2
    1.5
    18
    2.438
    11.5
    1 darab
    Egységár (HÉA nélkül)(egységár adóval)
    Normál feladási dátum
    89.61 €
    ( 106.64 € )
    5 munkanapok
    119.45 €
    ( 142.15 € )
    5 munkanapok
    95.31 €
    ( 113.42 € )
    5 munkanapok
    186.09 €
    ( 221.45 € )
    5 munkanapok
    248.92 €
    ( 296.21 € )
    5 munkanapok

    Részletes információk

    Alapvető információk

    [Features]
    -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations
    -Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities
    -Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

    Specifikációk és ár

    Specifications

    TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model:Related Image

    Model Number
    TSC-MCR-LS-HFEM3S (3 Flutes)

    Outer Diameter
    D
    Shoulder
    Radius
    R1
    Base
    Radius
    R2
    Approximate R-Value Flute Length
    Under Neck Diameter
    d1
    Length Under Neck
    ℓ1
    Overall Length
    L
    Shank Diameter
    d
    Figure
    4 0.5 4 0.813 8 3.8 35 80 6 1
    6 0.5 9 1.219 10 5.7 70 120 6 1
    8 1 12 1.625 16 7.6 85 135 8 2
    10 1.5 15 2.031 20 9.5 100 150 10 2
    12 1.5 18 2.438 24 11.5 108 160 12 2



    For Cutting Conditions, Refer to >>Click here.

    Jellemzők és használati példák

    More Information


    The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
    The long neck models not only avoid tool interference, but can also achieve increased efficiency when machining deep grooves.
    The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. Ideal for high speed machining and dry machining of anything from raw carbon steel materials to heat-treated / high hardness steel.
    [ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding.


    TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model:Related Image