Szűrési feltételek
- [B] Belt Width(mm)[50–300/10mm egység]
- [L] Conveyer Length(mm)[280–2000/5mm egység]
- Belt Type
- Motor Output(W)
- 6
- 25
- [TA] Motor Voltage (Single-Phase)(V)
- 230
- Motor Voltage (No Motor)
- Gearhead Reduction Ratio
- 5
- 7.5
- 9
- 12.5
- 15
- 18
- 25
- 30
- 36
- 50
- 60
- 75
- 90
- 100
- 120
- 150
- 180
- [NH] No Gear Heads
- Motor Manufacturer Selection
- Belt Specification
- Belt Specifications
- CAD
- 2D
- 3D
- Becsült szállítási napok
- Minden
- 12 munkanapok belül
Timing Belt Conveyors / GV Series / Dual Track / Center Drive / 2-Groove Frame (Pulley Dia. 30mm) / GVTWNUE / GVTWNSE
Cikkszám:
javaslat található.Vázlatrajz és specifikációs táblázat
GVTWNUE (Inboard Motor Type) / GVTWNSE (Outboard Motor Type)
Each slot has 4 nuts inserted.
The lengths of the conveyor belts on either sides of this product are different.
Please take care when removing the plastic cover, as it is relatively fragile.
When L≥1,400, it is recommended to mount on at least 2 stands.
Each slot has 4 nuts inserted.
The lengths of the conveyor belts on either sides of this product are different.
Please take care when removing the plastic cover, as it is relatively fragile.
When L≥1,400, it is recommended to mount on at least 2 stands.
*A Dimension Details
| Output (W) | Motor | Reduction Ratio | A | |
| Specifications | Manufacturer | |||
| 6 W | Constant speed motor | Oriental | 25~180 | 115.0 |
| Variable speed motor | Oriental | 25~180 | 125.0 | |
| 25 W | Constant speed motor | Panasonic | 5~180 | 115.0 |
| Oriental | 5~18 | 117.0 | ||
| 25~180 | 127.5 | |||
| Variable speed motor | ||||
| Oriental | 5~18 | 127.0 | ||
| 25~180 | 137.5 | |||
For accumulation conveyance (only compatible with sliding belts), consider conveying capacity to be no more than 1/2 of that shown in the graph.
Conveying capacity may vary depending on operating conditions.
This graph shows conveying capacity when level.
■Gearhead Reduction Ratio *Reference Value
*Conveyance speed reference values are based on IM (motor rotational speed 1,500 rpm [50 Hz]/1,800 rpm [60 Hz]).
*May decrease depending on load condition.
For motor specification IM, the above conveyance speeds are constant speeds.
For motor specification SCM, refer to the above values for the maximum speed.
Motor specification SCM is adjustable up to (1/15) × (max. speed). The weight that can be conveyed decreases as speed decreases.
*Conveyance speed reference values are based on IM (motor rotational speed 1,500 rpm [50 Hz]/1,800 rpm [60 Hz]).
*May decrease depending on load condition.
| Gearhead Reduction Ratio | Belt Speed (m/min) | |
| 50Hz | 60Hz | |
| 5 | 30.0 | 36.0 |
| 7.5 | 20.0 | 24.0 |
| 9 | 16.7 | 20.0 |
| 12.5 | 12.0 | 14.4 |
| 15 | 10.0 | 12.0 |
| 18 | 8.3 | 10.0 |
| 25 | 6.0 | 7.2 |
| 30 | 5.0 | 6.0 |
| 36 | 4.2 | 5.0 |
| 50 | 3.0 | 3.6 |
| 60 | 2.5 | 3.0 |
| 75 | 2.0 | 2.4 |
| 90 | 1.7 | 2.0 |
| 100 | 1.5 | 1.8 |
| 120 | 1.2 | 1.5 |
| 150 | 1.0 | 1.2 |
| 180 | 0.8 | 1.0 |
For motor specification SCM, refer to the above values for the maximum speed.
Motor specification SCM is adjustable up to (1/15) × (max. speed). The weight that can be conveyed decreases as speed decreases.
| Frame | Motor Cover | Pulley Holder | |
| Material | Aluminum | Aluminum | Aluminum |
| Surface Treatment | Clear Anodize | Painted | Painted |
Specifications
| Part Number | - | B | - | L | - | Motor | - | Belt Specifications | - | Motor Manufacturer Selection | ( | - | Alterations | ) | |||||||
| Output | - | Voltage | - | Specifications | - | Gearhead Reduction Ratio | |||||||||||||||
| GVTWNSE | - | 300 | - | 2000 | - | 25 | - | TA230 | - | IM | - | 5 | - | H | - | B | ( | - | MP · FYA · FYB · PK · NA · WA | ) | |
| Part Number | B 10 mm Increments | L 5 mm Increments | Motor | Belt Specifications | Motor Manufacturer Selection The prices vary by manufacturer. | |||||||
| Output (W) | Voltage (V) | Specifications | Gearhead Reduction Ratio | |||||||||
| GVTWNUE (Inboard Motor Type) GVTWNSE (Outboard Motor Type) | 50~300 | 280~2000 | 6 | TA230 (Simgle-phase)* | IM (Constant Speed Motor) SCM (Variable Speed Motor) |
| H (General Purpose, Translucent) S (For Sliding, Green) J (No Belt) | B (Oriental Motor) | ||||
| 25 | TA230 (Simgle-phase)* | IM (Constant Speed Motor) SCM (Variable Speed Motor) |
| A (Panasonic Motor) B (Oriental Motor) When motor specification is SCM (Variable Speed Motor),A (Panasonic Motor) is not applicable. | ||||||||
| 6 25 | NV (No Motor) | NM (No Motor) | NH (No Gearhead) | R (No Motor, Gearhead) | ||||||||
When "No motor, gearhead" is selected, the motor mounting hole pitch will vary depending on the motor output. For the dimension details, see Technical Information in our Conveyor Selection web site.
When "No motor, gearhead" is selected, this unit will be delivered unassembled. The customer is to assemble the unit by following instructions on the included assembly procedure manual. See our Conveyor Selection site for packaging details.
Mounting brackets for speed controllers are not included with the variable speed motor. When mounting brackets for speed controllers are required, select [SCB] as an alteration.
Regardless of belt specifications, it is not recommended to use the belt while the conveyor is tilted.
■Conveyor weight
*Reference values (vary depending on motor manufacturer) (kg)
*When the motor output is 25 W, add 1.5 kg.
*Reference values (vary depending on motor manufacturer) (kg)
| Belt width B (mm) | Conveyor length L (mm) | |||
| 500 | 1000 | 1500 | 2000 | |
| 100 | 3.5 | 4.5 | 5.5 | 6.4 |
| 200 | 3.8 | 4.7 | 5.7 | 6.7 |
| 300 | 4.0 | 5.0 | 6.0 | 7.0 |
Cikkszámlista
Elemek száma
| Cikkszám |
|---|
Egységár (HÉA nélkül)(egységár adóval) | Normál feladási dátum |
|---|
- ( - ) | 12 munkanapok |
- ( - ) | 12 munkanapok |
- ( - ) | 12 munkanapok |
- ( - ) | 12 munkanapok |
Részletes információk
Alapvető információk
Vigyázat
- Latest part number of conveyor is adding "E" to end of the original part number.
Szállítási dátum és ár
Price List
| Part Number | B | Available Sizes | |||||||||||||||||
| L280~ 300 | L305~ 400 | L405~ 500 | L505~ 600 | L605~ 700 | L705~ 800 | L805~ 900 | L905~ 1000 | L1005~ 1100 | L1105~ 1200 | L1205~ 1300 | L1305~ 1400 | L1405~ 1500 | L1505~ 1600 | L1605~ 1700 | L1705~ 1800 | L1805~ 1900 | L1905~ 2000 | ||
| GVTWNUE GVTWNSE | 50~100 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| 110~150 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 160~200 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 210~250 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 260~300 | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |