Manufacturer part number: GEAHF1.5-21-15-B-6
Brand: MISUMI
Price: 5.57 €
Delivery time: 5 Days
Number of Teeth: 21 Teeth
Tooth Width B: 15 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
GEAHF1.5-21-15-B-6
Back to the Category Spur Gears
Available dimensions and tolerances can be found under the tab More Information.
Type | Material | Surface Treatment |
GEAHF | EN 1.1191 Equiv. | Black Oxide |
Further specifications can be found under the tab More Information.
Part Number | - | Number of Teeth | - | B | - | Gear Shape | - | Shaft Bore Dia. |
GEAHF1.0 | - | 40 | - | 10 | - | B | - | 8 |
- Material: steel, stainless steel, sintered steel, nylon, polyacetal, brass, aluminum, cast iron
- Coatings: burnished, nickel-plated
- Heat treatment: induction hardened
- Shaft diameter tolerances: H7, H8
- Tooth flank clearance: N5, N7, N8, N9, N12
- Module: 0.3, 0.5, 0.75, 0.8, 1, 1.25, 1.5, 2, 2.5, 3, 4, 4.5, 5, 6, 8, 10, 15, 20
- Pressure angle: 20°
- Shaft diameter: 2 mm to 50 mm
- Number of teeth: 8 to 200
- Tooth width: 2 mm to 90 mm
The spur gears offered are generally machine elements that serve the non-slip transmission of force, movement transmission or movement change. The teeth of the cylinder wheels grip each other during transmission and largely roll over the tooth flanks. The tooth shape of the spur gear is convexly shaped in the shaped tooth system. At the beginning of the intervention, a rolling resistance acts on the tooth flank, which becomes a sliding friction in the course of the rotation.
A combination of gear wheels and rack gears is useful in the construction of rack gear. This allows motor rotary motion or other rotary motion to be converted into linear motion. rack gear boxes are theoretically possible in an endless assembly. Limits here only set the length of the rack gears for the rack gear drive.
Gear wheels with straight gearing are particularly suitable for the construction of gearboxes. The advantage of straight gearing as opposed to helical gears, is the possibility of transmitting a higher torque. It should be noted that with increasing speed within the transmission ratio or reduction, the torque to be transmitted decreases.
When designing spur gear pairs, the ratio of the gear ratio (number of teeth) and the module of the respective gear wheels must be observed.
The backlash is another important factor that must be considered during construction. Reverse play is understood as the result of the play that the change in the direction of rotation of a single gear wheel pair between the teeth. The risk of reverse play can be reduced if either the diameter or the number of teeth of the cogwheel pairing do not deviate too much from one another. If high wear is to be expected due to the pairing of gears, the MISUMI online shop offers gears with a hardened key-type.
For applications with the same rotational direction, it is possible to use an intermediate gear with integrated bearing on a cantilever shaft. The bearing number used can be found under the tab More Information. An overview of tolerances and permissible radial bearing deviations can be found in the following PDF.
In addition to gear wheels, MISUMI also offers suitable rotary shafts for the construction of a transmission. The straight front wheels can be assembled on these and secured with a set screw or machine keys (key with adjusting screw). This PDF provides an overview of the configurable mountings for the shaft rotation and keyway tolerances.
The continuous adjusting of a spur gear can be realized, among other things, by means of a clamping sleeve. The MISUMI online shop offers spur gears with clamping sleeve. Alternatively, we also offer individual keyless bushing that you can customize to your needs.
Application example - spur gear with rack gear
(1) Spur gear, (2) Clamping knobs, (3) Rack gear
Application example - spur gear
(1) Spur gear, (2) Workpiece, (3) Rollers
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
GEAHF1.5-21-15-B-6 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Number of Teeth (Teeth) | Tooth Width B (mm) | |
---|---|---|---|---|---|---|---|
5.57 € | 1 | Available | 5 Days | 10 | 21 | 15 |
Loading...
Back to the Category Spur Gears
Part Number | Number of Teeth | B | Gear Shape | Shaft Bore Dia. PH7 | d Reference Dia. | D Tip Dia. | G Root Dia. | H | L | ℓ1 | Unit Price | |
Type | Module | |||||||||||
GEAHF | 0.5 | 28 | 3 | B | 3 | 14 | 15 | 12.75 | 10 | 8 | 5 | |
30 | 15 | 16 | 13.75 | |||||||||
32 | 16 | 17 | 14.75 | |||||||||
35 | 17.5 | 18.5 | 16.25 | |||||||||
36 | 18 | 19 | 16.75 | |||||||||
40 | 2 | 3 | 20 | 21 | 18.75 | 10 | 7 | 5 | ||||
42 | 21 | 22 | 19.75 | |||||||||
45 | 22.5 | 23.5 | 21.25 | |||||||||
48 | 24 | 25 | 22.75 | |||||||||
50 | 25 | 26 | 23.75 | |||||||||
52 | 2 | 5 | 26 | 27 | 24.75 | 20 | 7 | 5 | ||||
60 | 30 | 31 | 28.75 | |||||||||
70 | 35 | 36 | 33.75 | |||||||||
80 | 40 | 41 | 38.75 | |||||||||
100 | 50 | 51 | 48.75 | |||||||||
0.8 | 20 | 7 | 4 | 16 | 17.6 | 14 | 10 | 14 | 7 | |||
24 | 7 | 5 | 19.2 | 20.8 | 17.2 | 12.5 | 14 | 7 | ||||
25 | 20 | 21.6 | 18 | |||||||||
28 | 22.4 | 24 | 20.4 | |||||||||
30 | 24 | 25.6 | 22 | |||||||||
32 | 5 | 5 | 25.6 | 27.2 | 23.6 | 12.5 | 14 | 9 | ||||
36 | 5 | 6 | 28.8 | 30.4 | 26.8 | 14 | 14 | 9 | ||||
40 | 32 | 33.6 | 30 | |||||||||
45 | 36 | 37.6 | 34 | |||||||||
48 | 38.4 | 40 | 36.4 | |||||||||
50 | 40 | 41.6 | 38 | |||||||||
1.0 | 20 | 12 | 6 | 20 | 22 | 17.5 | 16 | 20 | 8 | |||
21 | 12 | 6 | 21 | 23 | 18.5 | 18 | 20 | 8 | ||||
22 | 22 | 24 | 19.5 | |||||||||
23 | 12 | 6 | 23 | 25 | 20.5 | 20 | 20 | 8 | ||||
24 | 24 | 26 | 21.5 | |||||||||
25 | 25 | 27 | 22.5 | |||||||||
26 | 12 | 6 | 26 | 28 | 23.5 | 22 | 20 | 8 | ||||
27 | 12 | 6 | 27 | 29 | 24.5 | 24 | 20 | 8 | ||||
28 | 12 | 8 | 28 | 30 | 25.5 | 24 | 20 | 8 | ||||
29 | 12 | 6 | 29 | 31 | 26.5 | 26 | 20 | 8 | ||||
30 | 12 | 8 | 30 | 32 | 27.5 | 27 | 20 | 8 | ||||
32 | 10 | 8 | 32 | 34 | 29.5 | 28 | 20 | 10 | ||||
34 | 34 | 36 | 31.5 | |||||||||
35 | 10 | 8 | 35 | 37 | 32.5 | 30 | 20 | 10 | ||||
36 | 36 | 38 | 33.5 | |||||||||
38 | 38 | 40 | 35.5 | |||||||||
40 | 40 | 42 | 37.5 | |||||||||
42 | 42 | 44 | 39.5 | |||||||||
44 | 44 | 46 | 41.5 | |||||||||
45 | 45 | 47 | 42.5 | |||||||||
46 | 46 | 48 | 43.5 | |||||||||
48 | 10 | 8 | 48 | 50 | 45.5 | 44 | 20 | 10 | ||||
50 | 10 | 8 | 50 | 52 | 47.5 | 46 | 20 | 10 | ||||
52 | 52 | 54 | 49.5 | |||||||||
54 | 54 | 56 | 51.5 | |||||||||
55 | 55 | 57 | 52.5 | |||||||||
56 | 56 | 58 | 53.5 | |||||||||
58 | 58 | 60 | 55.5 | |||||||||
60 | 10 | 10 | 60 | 62 | 57.5 | 50 | 20 | 10 | ||||
62 | 62 | 64 | 59.5 | |||||||||
64 | 64 | 66 | 61.5 | |||||||||
65 | 65 | 67 | 62.5 | |||||||||
66 | 66 | 68 | 63.5 | |||||||||
68 | 68 | 70 | 65.5 | |||||||||
70 | 10 | 10 | 70 | 72 | 67.5 | 56 | 20 | 10 | ||||
72 | 72 | 74 | 69.5 | |||||||||
75 | 75 | 77 | 72.5 | |||||||||
80 | 10 | 10 | 80 | 82 | 77.5 | 60 | 20 | 10 | ||||
84 | 84 | 86 | 81.5 | |||||||||
85 | 85 | 87 | 82.5 | |||||||||
90 | 90 | 92 | 87.5 | |||||||||
95 | 95 | 97 | 92.5 | |||||||||
96 | 96 | 98 | 93.5 | |||||||||
100 | 10 | 16 | 100 | 102 | 97.5 | |||||||
110 | 10 | 16 | 110 | 112 | 107.5 | 70 | 20 | 10 | ||||
120 | 120 | 122 | 117.5 |
Part Number | Number of Teeth | B | Gear Shape | Shaft Bore Dia. PH7 | d Reference Dia. | D Tip Dia. | G Root Dia. | H | L | ℓ1 | Unit Price | |
Type | Module | |||||||||||
GEAHF | 1.5 | 20 | 15 | B | 6 | 30 | 33 | 26.25 | 25 | 27 | 12 | |
21 | 31.5 | 34.5 | 27.75 | |||||||||
22 | 33 | 36 | 29.25 | 26 | ||||||||
23 | 34.5 | 37.5 | 30.75 | 27 | ||||||||
24 | 36 | 39 | 32.25 | 30 | ||||||||
25 | 37.5 | 40.5 | 33.75 | |||||||||
26 | 39 | 42 | 35.25 | 32 | ||||||||
27 | 40.5 | 43.5 | 36.75 | 34 | ||||||||
28 | 42 | 45 | 38.25 | |||||||||
29 | 43.5 | 46.5 | 39.75 | 35 | ||||||||
30 | 45 | 48 | 41.25 | |||||||||
32 | 48 | 51 | 44.25 | 40 | ||||||||
34 | 51 | 54 | 47.25 | |||||||||
35 | 52.5 | 55.5 | 48.75 | |||||||||
36 | 54 | 57 | 50.25 | |||||||||
38 | 57 | 60 | 53.25 | 45 | ||||||||
40 | 8 | 60 | 63 | 56.25 | ||||||||
42 | 63 | 66 | 59.25 | |||||||||
44 | 66 | 69 | 62.25 | |||||||||
45 | 67.5 | 70.5 | 63.75 | |||||||||
46 | 69 | 72 | 65.25 | |||||||||
48 | 72 | 75 | 68.25 | 50 | ||||||||
50 | 75 | 78 | 71.25 | |||||||||
52 | 78 | 81 | 74.25 | |||||||||
54 | 12 | 81 | 84 | 77.25 | ||||||||
55 | 82.5 | 85.5 | 78.75 | |||||||||
56 | 84 | 87 | 80.25 | |||||||||
58 | 87 | 90 | 83.25 | |||||||||
60 | 90 | 93 | 86.25 | 55 | ||||||||
62 | 93 | 96 | 89.25 | |||||||||
64 | 96 | 99 | 92.25 | |||||||||
65 | 97.5 | 100.5 | 93.75 | |||||||||
66 | 99 | 102 | 95.25 | |||||||||
2.0 | 21 | 20 | 8 | 42 | 46 | 37 | 34 | 34 | 14 | |||
22 | 44 | 48 | 39 | 36 | ||||||||
23 | 46 | 50 | 41 | 37 | ||||||||
24 | 48 | 52 | 43 | 40 | ||||||||
25 | 50 | 54 | 45 | |||||||||
26 | 52 | 56 | 47 | 42 | ||||||||
27 | 54 | 58 | 49 | 45 | ||||||||
28 | 56 | 60 | 51 | |||||||||
29 | 58 | 62 | 53 | 47 | ||||||||
30 | 60 | 64 | 55 | 48 | ||||||||
32 | 64 | 68 | 59 | 50 | ||||||||
34 | 10 | 68 | 72 | 63 | ||||||||
35 | 70 | 74 | 65 | 52 | ||||||||
36 | 72 | 76 | 67 | 55 | ||||||||
38 | 76 | 80 | 71 | |||||||||
40 | 80 | 84 | 75 | 60 | ||||||||
42 | 84 | 88 | 79 | |||||||||
44 | 88 | 92 | 83 | |||||||||
45 | 90 | 94 | 85 | |||||||||
46 | 92 | 96 | 87 | |||||||||
2.5 | 20 | 25 | 8 | 50 | 55 | 43.75 | 40 | 41 | 16 | |||
21 | 52.5 | 57.5 | 46.25 | 42 | ||||||||
22 | 55 | 60 | 48.75 | 44 | ||||||||
23 | 57.5 | 62.5 | 51.25 | 46 | ||||||||
24 | 60 | 65 | 53.75 | 48 | ||||||||
25 | 62.5 | 67.5 | 56.25 | 50 | ||||||||
26 | 65 | 70 | 58.75 | 55 | ||||||||
27 | 67.5 | 72.5 | 61.25 | 60 | ||||||||
28 | 70 | 75 | 63.75 | |||||||||
29 | 72.5 | 77.5 | 66.25 | 62 | ||||||||
30 | 75 | 80 | 68.75 | 65 | ||||||||
32 | 80 | 85 | 73.75 | 70 | ||||||||
34 | 10 | 85 | 90 | 78.75 | ||||||||
35 | 87.5 | 92.5 | 81.25 | |||||||||
36 | 90 | 95 | 83.75 | 75 | ||||||||
3.0 | 20 | 30 | 8 | 60 | 66 | 52.5 | 50 | 48 | 18 | |||
21 | 63 | 69 | 55.5 | 52 | ||||||||
22 | 66 | 72 | 58.5 | 54 | ||||||||
23 | 69 | 75 | 61.5 | 56 | ||||||||
24 | 72 | 78 | 64.5 | 58 | ||||||||
25 | 75 | 81 | 67.5 | 60 | ||||||||
26 | 10 | 78 | 84 | 70.5 | 65 | |||||||
27 | 81 | 87 | 73.5 | |||||||||
28 | 84 | 90 | 76.5 | 70 | ||||||||
29 | 87 | 93 | 79.5 | |||||||||
30 | 90 | 96 | 82.5 | 75 |
Material (Details) | General Steel Material | Shape | Shape B | Surface Treatment | Black Oxide |
---|---|---|---|---|---|
Ground Tooth | Not Provided | Backlash | Provided | Precision(Old JIS) | JIS B 1702 (Class 4) |
Hole Shape | Round Hole |
This page is Spur gears / with pin bore / contact angle 20 degrees, part number GEAHF1.5-21-15-B-6.
You can find the detail information about specifications and dimensions on part number GEAHF1.5-21-15-B-6.
Configure
Basic Attributes
Type
Number of Teeth(Teeth)
Tooth Width B(mm)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes
Can different modules be combined with each other?
Since the module describes the division of the teeth along the pitch circle diameter, various modules cannot be combined into one pair of gears.
What is involute gearing?
Evolved gearing is understood to be the convex production of a tooth flank. The sliding friction along the tooth flank can thus be minimized. This also reduces wear and tear.
What is the pressure angle?
The pressure angle is defined as the angle of the highest drive force between two gears. A combination of different pressure angles is not recommended, since increased wear is to be expected.
Is the position of the keyway to the key-type specified?
The keyway has no specified position reference to the tooth base or the head surface of the sprocket.
What is the reverse clearance?
The reverse play arises at the moment of the direction of rotation of a spur gear pairing is changed. It describes the gap between the gear flanks of each tooth in engagement.
Part Number |
---|
GEAHF0.5-35-3-B-3 |
GEAHF0.5-36-3-B-3 |
GEAHF0.5-40-2-B-3 |
GEAHF1.5-22-15-B-6 |
GEAHF1.5-23-15-B-6 |
GEAHF1.5-24-15-B-6 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Number of Teeth (Teeth) | Tooth Width B (mm) |
---|---|---|---|---|---|---|---|
7.70 € | 1 | Available | 5 Days | 10 | 35 | 3 | |
7.70 € | 1 | Available | 5 Days | 10 | 36 | 3 | |
8.10 € | 1 | Available | 5 Days | 10 | 40 | 2 | |
5.95 € | 1 | Available | 5 Days | 10 | 22 | 15 | |
6.45 € | 1 | Available | 5 Days | 10 | 23 | 15 | |
6.70 € | 1 | Available | 5 Days | 10 | 24 | 15 |