Tool Sliders / Linear Guide Type (JGL250)
Vázlatrajz és specifikációs táblázat
JGL150 | Clamp Enlarged View (View from Front) By fitting the plunger tip ball in the depressed part of the ball button, the table is fixed Mounting Hole Dimension (Common)  Stroke Adjustment Method
[ ! ] Only on JGL25, by recombining the stopper part mounting hole positions on the above two sides, the stroke can be changed. | |||||||||||||||||||||||
JGL250 | ||||||||||||||||||||||||
| Main Body | Material | Surface Treatment |
| Table | Aluminum Alloy | Clear Anodize |
| Base Plate | ||
| Knob | ||
| Handle Bracket | ||
| Linear Guide | EN 1.4125 Equiv. | — |
| Stopper Block | EN 1.1191 Equiv. | Electroless Nickel Plating |
Specification Table
| Part Number |
| JGL250 |
| Part Number | Stroke (mm) | Table Size (mm) | Base Length (mm) | (Reference Value) Required Thrust (N) | (Reference Value) Plunger Holding Force (N) | Load Capacity (kN) | Weight (kg) | |
| Type | No. | |||||||
| JGL | 150 | 150 | 150 × 150 | 345 | 2 | 23 | 4.5 | 2.8 |
| 250 | 150·200·250 | 150 × 150 | 445 | 2 | 23 | 4.5 | 3.4 | |
Required Thrust: Force required to move the table by using the knob
Load Capacity: Max. allowable value of load applied vertically to the table surface
Values on the (Ref. Value) columns in the above table are measured when no load is applied.
Részletes információk
Vázlat és specifikációk
App. Example
■Testing Electronic Board
Katalógus
A cikkszám megerősítésre került