Helical Gears / Pressure Angle 20Deg. / Helix Angle 45Deg.

Click on this image to zoom in.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Helical Gears/Pressure Angle 20Deg./Helix Angle 45Deg.:Related Image

Type			Material	Surface Treatment	Accessory
Straight Bore	Straight Bore + Tap	Keyway + Tap	Material	Surface Treatment	Accessory
NEGHN	NEGTN	NEGKN	EN 1.1191 Equiv.	-	Set Screw (EN 1.7220 Equiv., Black Oxide)
NEGHB	NEGTB	NEGKB	EN 1.1191 Equiv.	Black Oxide	Set Screw (EN 1.7220 Equiv., Black Oxide)
NEGHS	NEGTS	NEGKS	EN 1.4301 Equiv.	-	Set Screw (EN 1.4301 Equiv.)
NEGHM	NEGTM	-	MC Nylon	-	Set Screw (EN 1.4301 Equiv.)

Set Screw is not included in Un-tapped Type products.

Specifications

Part Number	-	Number of Teeth	-	Shaft Bore Dia. P	-	Twisting Direction
NEGHN1.0	-	20	-	10	-	L

Part Number		Number of Teeth	Shaft Bore Dia. P_H7 (1mm Increment)		Twisting Direction	d	D	B	H	L	ℓ
Type	Module	Number of Teeth	Straight Bore Straight Bore + Tap	Keyway + Tap	Twisting Direction	d	D	B	H	L	ℓ
Straight Bore NEGHN NEGHB NEGHS NEGHM Straight Bore + Tap NEGTN NEGTB NEGTS NEGTM Keyway + Tap NEGKN NEGKB NEGKS	1.0	13	6~7	-	L (Left) R (Right)	18.38	20.38	10	15	20	10
		15	6~10	8		21.21	23.21		18
		20	8~16	8~13		28.28	30.28		25
		26	10~20	10~17		36.77	38.77		30
		30	10~25	10~22		42.43	44.43		35
	1.5	10	8	-		21.21	24.21	15	16	25	10
		13	10~14	10~12		27.58	30.58		23
		15	10~16	10~13		31.82	34.82		25
		20	12~20	12~17		42.43	45.43		30
		26	12~30	12~26		55.15	58.15		40
		30	12~33	12~30		63.64	66.64		45
	2.0	10	12~13	12		28.28	32.28	20	22	35	15
		13	12~20	12~17		36.77	40.77		30
		15	12~25	12~22		42.43	46.43		35
		20	15~33	15~30		56.57	60.57		45
		26	20~46	20~44		73.54	77.54		60
		30	20~51	20~47		84.85	88.85		65
	2.5	10	12~17	12~14		35.36	40.36	22	26	38	16
		13	15~25	15~22		45.96	50.96		35
		15	15~30	15~26		53.03	58.03		40
		20	20~46	20~44		70.71	75.71		60
		26	20~56	20~50		91.92	96.92		70
		30	20~65	20~50		106.07	111.07		80
	3.0	10	15~24	15~21		42.43	48.43	25	34	43	18
		13	20~33	20~30		55.15	61.15		45
		15	20~38	20~34		63.64	69.64		50
		20	20~46	20~44		84.85	90.85		60
		26	20~65	20~50		110.31	116.31		80
		30	20~65	20~50		127.28	133.28		90

Shaft Bore Dia. 6.35 is available for Straight Bore and Straight Bore + Tap. Specify 10K as P dimension if keyway width of 4.0mm (height 1.8mm) for Keyway + Tap with shaft bore diameter of 10 is desired. >> P.1498
Shaft Bore Dia. 9 is not available for Keyway + Tap. Combine the same handedness (L and L or R and R) for unparallel shafts and different handedness (L and R) for parallel shafts.
Helical gears generate axial thrust on shafts. Choose bearings that can withstand the axial thrust generated by the gears.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
NEGHM1.0-13-[6,6.35,7]-[L,R]
NEGHM1.0-15-[6,6.35,7,8,9,10]-[L,R]
NEGHM1.0-20-[8-16/1]-[L,R]
NEGHM1.0-26-[10-26/1]-[L,R]
NEGHM1.0-30-[10-25/1]-[L,R]
NEGHM1.5-10-8-[L,R]
NEGHM1.5-13-[10-14/1]-[L,R]
NEGHM1.5-15-[10-16/1]-[L,R]
NEGHM1.5-20-[12-20/1]-[L,R]
NEGHM1.5-26-[12-30/1]-[L,R]
NEGHM1.5-30-[12-33/1]-[L,R]
NEGHM2.0-10-[12-13/1]-[L,R]
NEGHM2.0-13-[12-20/1]-[L,R]
NEGHM2.0-15-[12-25/1]-[L,R]
NEGHM2.0-20-[15-33/1]-[L,R]
NEGHM2.0-26-[20-46/1]-[L,R]
NEGHM2.0-30-[20-51/1]-[L,R]
NEGHM2.5-10-[12-17/1]-[L,R]
NEGHM2.5-13-[15-25/1]-[L,R]
NEGHM2.5-15-[15-30/1]-[L,R]
NEGHM2.5-20-[20-46/1]-[L,R]
NEGHM2.5-26-[20-56/1]-[L,R]
NEGHM2.5-30-[20-65/1]-[L,R]
NEGHM3.0-10-[15-24/1]-[L,R]
NEGHM3.0-13-[20-33/1]-[L,R]
NEGHM3.0-15-[20-38/1]-[L,R]
NEGHM3.0-20-[20-46/1]-[L,R]
NEGHM3.0-26-[20-65/1]-[L,R]
NEGHM3.0-30-[20-65/1]-[L,R]
NEGTM1.0-13-[6,6.35,7]-[L,R]
NEGTM1.0-15-[6,6.35,7,8,9,10]-[L,R]
NEGTM1.0-20-[8-16/1]-[L,R]
NEGTM1.0-26-[10-26/1]-[L,R]
NEGTM1.0-30-[10-25/1]-[L,R]
NEGTM1.5-10-8-[L,R]
NEGTM1.5-13-[10-14/1]-[L,R]
NEGTM1.5-15-[10-16/1]-[L,R]
NEGTM1.5-20-[12-20/1]-[L,R]
NEGTM1.5-26-[12-30/1]-[L,R]
NEGTM1.5-30-[12-33/1]-[L,R]
NEGTM2.0-10-[12-13/1]-[L,R]
NEGTM2.0-13-[12-20/1]-[L,R]
NEGTM2.0-15-[12-25/1]-[L,R]
NEGTM2.0-20-[15-33/1]-[L,R]
NEGTM2.0-26-[20-46/1]-[L,R]
NEGTM2.0-30-[20-51/1]-[L,R]
NEGTM2.5-10-[12-17/1]-[L,R]
NEGTM2.5-13-[15-25/1]-[L,R]
NEGTM2.5-15-[15-30/1]-[L,R]
NEGTM2.5-20-[20-46/1]-[L,R]
NEGTM2.5-26-[20-56/1]-[L,R]
NEGTM2.5-30-[20-65/1]-[L,R]
NEGTM3.0-10-[15-24/1]-[L,R]
NEGTM3.0-13-[20-33/1]-[L,R]
NEGTM3.0-15-[20-38/1]-[L,R]
NEGTM3.0-20-[20-46/1]-[L,R]
NEGTM3.0-26-[20-65/1]-[L,R]
NEGTM3.0-30-[20-65/1]-[L,R]

Minimum order quantity	Standard Shipping Days ?	RoHS	Module	Number of Teeth (Teeth)	Material (mm)	Surface Treatment	Shaft Bore Dia., Shaft Dia.	Shaft Hole Specifications	Material	Twisting Direction
1	7 Days	10	1	13	Resin	Not Provided	6 ～ 7	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	15	Resin	Not Provided	6 ～ 10	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	20	Resin	Not Provided	8 ～ 16	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	26	Resin	Not Provided	10 ～ 26	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	30	Resin	Not Provided	10 ～ 25	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	10	Resin	Not Provided	8	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	13	Resin	Not Provided	10 ～ 14	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	15	Resin	Not Provided	10 ～ 16	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	20	Resin	Not Provided	12 ～ 20	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	26	Resin	Not Provided	12 ～ 30	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	30	Resin	Not Provided	12 ～ 33	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	10	Resin	Not Provided	12 ～ 13	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	13	Resin	Not Provided	12 ～ 20	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	15	Resin	Not Provided	12 ～ 25	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	20	Resin	Not Provided	15 ～ 33	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	26	Resin	Not Provided	20 ～ 46	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	30	Resin	Not Provided	20 ～ 51	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	10	Resin	Not Provided	12 ～ 17	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	13	Resin	Not Provided	15 ～ 25	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	15	Resin	Not Provided	15 ～ 30	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	20	Resin	Not Provided	20 ～ 46	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	26	Resin	Not Provided	20 ～ 56	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	30	Resin	Not Provided	20 ～ 65	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	10	Resin	Not Provided	15 ～ 24	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	13	Resin	Not Provided	20 ～ 33	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	15	Resin	Not Provided	20 ～ 38	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	20	Resin	Not Provided	20 ～ 46	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	26	Resin	Not Provided	20 ～ 65	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	30	Resin	Not Provided	20 ～ 65	Round Hole	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	13	Resin	Not Provided	6 ～ 7	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	15	Resin	Not Provided	6 ～ 10	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	20	Resin	Not Provided	8 ～ 16	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	26	Resin	Not Provided	10 ～ 26	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1	30	Resin	Not Provided	10 ～ 25	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	10	Resin	Not Provided	8	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	13	Resin	Not Provided	10 ～ 14	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	15	Resin	Not Provided	10 ～ 16	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	20	Resin	Not Provided	12 ～ 20	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	26	Resin	Not Provided	12 ～ 30	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	1.5	30	Resin	Not Provided	12 ～ 33	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	10	Resin	Not Provided	12 ～ 13	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	13	Resin	Not Provided	12 ～ 20	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	15	Resin	Not Provided	12 ～ 25	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	20	Resin	Not Provided	15 ～ 33	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	26	Resin	Not Provided	20 ～ 46	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2	30	Resin	Not Provided	20 ～ 51	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	10	Resin	Not Provided	12 ～ 17	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	13	Resin	Not Provided	15 ～ 25	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	15	Resin	Not Provided	15 ～ 30	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	20	Resin	Not Provided	20 ～ 46	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	26	Resin	Not Provided	20 ～ 56	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	2.5	30	Resin	Not Provided	20 ～ 65	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	10	Resin	Not Provided	15 ～ 24	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	13	Resin	Not Provided	20 ～ 33	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	15	Resin	Not Provided	20 ～ 38	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	20	Resin	Not Provided	20 ～ 46	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	26	Resin	Not Provided	20 ～ 65	Round Hole + Tap	MC Nylon	Left [L] / Right [R]
1	7 Days	10	3	30	Resin	Not Provided	20 ～ 65	Round Hole + Tap	MC Nylon	Left [L] / Right [R]

Products homepage

Basic information

Heat Treatment(φ)	Not Provided	Ground Tooth	Not Provided	Surface Treatment	Not Provided

Configure

58Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Module
1

1.5

2

2.5

3
Clear
Number of Teeth(Teeth)
10

13

15

20

26

30
Clear
Surface Treatment
- Not Provided
- Black Oxide
Clear
Shaft Bore Dia., Shaft Dia.
6

6.35

7

8

9

10

12
[8-65/1]
Clear
Shaft Hole Specifications
- Keyway Hole + Tap
- Round Hole
- Round Hole + Tap
Clear
Material
- EN 1.1191 Equiv.
- EN 1.4301 Equiv.
- MC Nylon
Clear
Twisting Direction
- Left [L]
- Right [R]
Clear
Type
- NEGHB
- NEGHM
- NEGHN
- NEGHS
- NEGKB
- NEGKN
- NEGKS
- NEGTB
- NEGTM
- NEGTN
- NEGTS
Clear
Material(mm)
- General Steel Material
- Stainless Steel
- Resin
Clear
Filter by CAD data type
- 2D
- 3D
Clear