Megerősítve
- Spraying Angle θ (at 0.5MPa)(deg)
- 70
- Hole Diameter(mm)
- 0.5
- Type
- CAD
- 2D
- 3D
- Becsült szállítási napok
- Minden
- 5 munkanapok belül
Spray Nozzle Ring Type NZRT
Vázlatrajz és specifikációs táblázat
Material: Main Body, Strainer(80 Mesh) EN 1.4301 Equiv.
Specifications
| Part Number | - | d |
| NZRFS1 | - | 1.0 |
| Part Number | d (Hole Dia.) | T | Weight (g) | Unit Price | Volume Discount Rate | |
| Type | No. | 1 ~ 4 pc(s). | 5~20 | |||
| NZRT | 2 | 0.5 | R1/4 | 33.0 | ||
| 0.7 | ||||||
| 1.0 | ||||||
■NZRT Specifications
Listed values are for reference, not guaranteed.
Does not spray normally at less than 0.2MPa. If the current fluid is air, the product does not spray with the values described on the above table.
| Size | Hole Dia. (mm) | 0.5 | 0.7 | 1.0 | |||||||||
| 1/4 | Water Pressure (MPa) | 0.2 | 0.3 | 0.4 | 0.5 | 0.2 | 0.3 | 0.4 | 0.5 | 0.2 | 0.3 | 0.4 | 0.5 |
| Water Qty. (ℓ/min) | 0.11 | 0.13 | 0.15 | 0.17 | 0.14 | 0.17 | 0.19 | 0.21 | 0.20 | 0.24 | 0.27 | 0.30 | |
| Spray Angle (° ) | 60 | 60 | 65 | 70 | 65 | 65 | 70 | 75 | 65 | 70 | 75 | 80 | |
Does not spray normally at less than 0.2MPa. If the current fluid is air, the product does not spray with the values described on the above table.
Részletes információk
Vázlat és specifikációk
More Information
■Features: Since particle is very fine as a fluid nozzle, the higher the water pressure is, the higher the efficiency of air saturation becomes.
■Applications: Humidification, Small Amount of Fluid Application
■Applications: Humidification, Small Amount of Fluid Application
Katalógus
A cikkszám megerősítésre került