Terminal Blocks / Hydraulic / Outlets 2 Sides / No Inlets(Cikkszámlista: 8 oldal)

Type							Material	Surface Treatment	Max. Operating Pressure
Pitch (P) Standard				Pitch (P) Configurable
20 Sq.	30x35 Sq.	50 Sq.	60 Sq.	20 Sq.	30x35 Sq.	50 Sq.
BTSB	BTS	BTSFL	BTSL	-	BTSP	BTSFLP	EN 1.0038 Equiv.	Trivalent Chromate	20.6MPa≈210kgf/cm2 or less
BTSBM	BTSM	BTSFLM	-	-	-	-		Electroless Nickel Plating
BTSBR	BTSR	BTSFLR	-	BTSBRP	BTSRP	BTSFLRP	EN 1.4301 Equiv.	-
-	BTSS	-	-	-	-	-	EN 1.4401 Equiv.
-	BTSC	-	-	-	-	-	Brass		1MPa≈10kgf/cm2 or less

BTSSP (EN 1.4401 Equiv., 30x35 Sq., Pitch Configurable) is available on our website.

Part Number				Rc (PT), NPT Selection	Pitch P		Number of Pitches N	Total Number of R and S Threads	A	B	E	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	R, S	Standard	Configurable 1mm Increment								M
(20 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped)	1	1 (1/8)	-	-	0	2	20	20	20	7.5	10	M5
Pitch Standard BTSB BTSBM BTSBR	Pitch Configurable BTSBRP		2		25	15~50	1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
			7				6	14
			8				7	16
(30x35 Sq.)			1	1 (1/8) 2 (1/4) 3 (3/8) 1N (NPT1/8) 2N (NPT1/4) 3N (NPT3/8)	-	-	0	2	30	35	20	7.5	17.5	M6
Pitch Standard BTS BTSM BTSR BTSS BTSC	Pitch Configurable BTSP BTSRP		2		35	25~50	1	4
			3				2	6
			4				3	8
			5				4	10
			6				5	12
			7				6	14
			8				7	16
(50 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	-	-	0	2	50	50	30	7.5	25	M8
Pitch Standard BTSFL BTSFLM BTSFLR	Pitch Configurable BTSFLP BTSFLRP		2		60	35~60	1	4
			3				2	6
			4				3	8
			5				4	10
			6			40~60	5	12
(60 Sq.)			1	6 (3/4) 8 (1)	-	-	0	2	60	60	40	10	30	M8
Pitch Standard BTSL			2		60		1	4
			3				2	6
			4				3	8

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BTS) For ordering, see the Ordering Example.
For R and S, specify 1, 2, 3, 4, 6, 8, 1N, 2N or 3N indicated before ( ). Single Circuit is not available for Pitch Configurable Type.
SUS316 or Brass is for up to 6 connections.Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except 20 Sq.)