Manifold Hydraulic / Outlets 3 Sides / No Inlets (Part Numbers - CAD Download)
Hydraulic manifold blocks. G (PF) thread machining can also be specified.
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| Type | Material | Surface Treatment | Max. Operating Pressure | |||||||
| Pitch (P) Standard | Pitch (P) Configurable | |||||||||
| 25 × 32 Sq. | 40 Sq. | 50 Sq. | 60 Sq. | 70 Sq. | 40 Sq. | 50 Sq. | 60 Sq. | |||
| BMAS | BMAFA | BMAFL | BMAFLK | BMAL | BMAFPA | BMAFLP | BMAFLKP | Steel for General Structure | Trivalent Chromate | 20.6 MPa ≈ 210 kgf/cm2 or less |
| — | BMAFMA | BMAFLM | — | BMALM | — | BMAFLMP | — | Electroless Nickel Plating | ||
| BMASR | BMAFRA | BMAFLR | — | — | — | — | — | SUS304 | — | |
| — | BMAFSA | — | — | — | — | — | — | SUS316 | ||
| — | BMAFCA | — | — | — | — | — | — | Brass | 1 MPa ≈ 10 kgf/cm2 or less | |
Specification Table
| Part Number | — | Q | — | R | — | S | — | P | ||||||
| Type | Mounting Hole Change | Number of Circuits | ||||||||||||
| BMAF BMAFLP G−BMAFLP | NA NA | 4 3 3 | — — — | Q3 Q3 Q3 | — — — | R2 R4 R4 | — — — | S3 S4 S4 | — — | P45 P45 | (G Thread) | |||
| Part Number | Rc (PT), NPT Selection | Pitch P | Number of Pitches N | Total Number of Q, R and S Threads | A | B | E | F | X | Y | Mounting Hole | ||||
| Type | Mounting Hole Change | Number of Circuits | Q, R, S | Standard | Configurable 1mm Increment | M | |||||||||
| (25x32 Sq.) | NA (Through) T (Tapped) ZT (Counterbore Tapped) YZ (Side Counterbore) YN (Side Through) | 1 | 1 (1/8) | - | - | 0 | 3 | 25 | 32 | 20 | 16 | 7.5 | 7 | M5 | |
| Pitch Standard BMAS BMASR | 2 | 25 | 1 | 6 | |||||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 5 | 18 | |||||||||||||
| 7 | 6 | 21 | |||||||||||||
| 8 | 7 | 24 | |||||||||||||
| (40 Sq.) | 1 | - | - | 0 | 3 | 40 | 40 | 25 | 20 | 7.5 | 7 | M6 | |||
| Pitch Standard BMAFA BMAFMA BMAFRA BMAFSA BMAFCA | Pitch Configurable BMAFPA | 2 | 1 (1/8) | 40 | 25~50 | 1 | 6 | ||||||||
| 3 | 2 (1/4) | 2 | 9 | ||||||||||||
| 4 | 3 (3/8) | 3 | 12 | ||||||||||||
| 5 | 1N (NPT1/8) | 4 | 15 | ||||||||||||
| 6 | 2N (NPT1/4) | 30~50 | 5 | 18 | |||||||||||
| 7 | 3N (NPT3/8) | 6 | 21 | ||||||||||||
| (Standard Change: E dimension) | 8 | 7 | 24 | ||||||||||||
| (50 Sq.) | 1 | - | - | 0 | 3 | 50 | 50 | 30 | 25 | 7.5 | 8 | M8 | |||
| Pitch Standard BMAFL BMAFLM BMAFLR | Pitch Configurable BMAFLP BMAFLMP | 2 | 2 (1/4) | 60 | 35~60 | 1 | 6 | ||||||||
| 3 | 3 (3/8) | 2 | 9 | ||||||||||||
| 4 | 4 (1/2) | 3 | 12 | ||||||||||||
| 5 | 6 (3/4) | 4 | 15 | ||||||||||||
| 6 | 40~60 | 5 | 18 | ||||||||||||
| (60 Sq.) | 1 | - | - | 0 | 3 | 60 | 60 | 30 | 30 | 7.5 | 8 | M8 | |||
| Pitch Standard BMAFLK | Pitch Configurable BMAFLKP | 2 | 2 (1/4) | 60 | 35~60 | 1 | 6 | ||||||||
| 3 | 3 (3/8) | 2 | 9 | ||||||||||||
| 4 | 4 (1/2) | 3 | 12 | ||||||||||||
| 5 | 6 (3/4) | 4 | 15 | ||||||||||||
| 6 | 40~60 | 5 | 18 | ||||||||||||
| (70 Sq.) | 1 | - | - | 0 | 3 | 70 | 70 | 40 | 35 | 10 | 10 | M8 | |||
| Pitch Standard BMAL BMALM | 2 | 6 (3/4) | 60 | 1 | 6 | ||||||||||
| 3 | 8 (1) | 2 | 9 | ||||||||||||
| 4 | 3 | 12 | |||||||||||||
For Q, R and S, specify 1, 2, 3, 4, 6, 8, 1N, 2N or 3N indicated before ( ).
Single Circuit is not available for Pitch Configurable Type.
SUS316 or Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.
For Block Square 50 Type, when 3/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square 60 Type instead.
Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types .
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Shape | Material | Surface Treatment | Block Size (mm) | Number of Circuits (Circuits) | Thread Size / Type | Mounting Hole Change | Pitch P (mm) | Pitch Standard / Configurable | Application | Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1) | Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1) | Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 1 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | - | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 2 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 5 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 6 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 7 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 8 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 1 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | - | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 2 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 5 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 6 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 7 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 8 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 1 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | - | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 2 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 5 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 6 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 1 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | - | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 2 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 5 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 6 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 1 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | - | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 2 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 5 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 6 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 7 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 6 Days | 10 | T-Shaped Hole | EN 1.4301 Equiv. | Not Provided | 25 x 32 | 8 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 25 | Fixed Type | For Water Hydraulic | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 1 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | - | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 2 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 5 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 6 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 7 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 8 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 1 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | - | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 2 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 5 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 6 | Standard Thread {PT, m (Coarse) Thread} | YN (Side Through) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 1 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | - | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 2 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 3 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 | ||
- | 1 | 9 Days | 10 | T-Shaped Hole | Steel for General Structure | Trivalent Chromate | 25 x 32 | 4 | Standard Thread {PT, m (Coarse) Thread} | YZ (Side Counterbore) | 25 | Fixed Type | For hydraulic / Water Pressure | 1 | 1 | 1 |
Loading...
Configure
Basic Attributes
-
Shape
-
Intlets - None Outlets - Top & Side -
T-Shaped Hole
-
-
Material
- EN 1.4301 Equiv.
- Steel for General Structure
-
Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
-
Block Size(mm)
- 25 x 32
- 40 x 40
- 50 x 50
- 60 x 60
- 70 x 70
-
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Thread Size / Type
-
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- T (Tapped)
- YN (Side Through)
- YZ (Side Counterbore)
- ZT (Counterbore Tapped)
-
Pitch P(mm)
-
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
-
Application
- For Water Hydraulic
- For hydraulic / Water Pressure
-
Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
-
Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
-
Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
-
Type
- BMAFL
- BMAFLK
- BMAFLKP
- BMAFLM
- BMAFLMP
- BMAFLP
- BMAFLR
- BMAL
- BMALM
- BMAS
- BMASR
- G-BMAFL
- G-BMAFLK
- G-BMAFLKP
- G-BMAFLM
- G-BMAFLMP
- G-BMAFLP
- G-BMAFLR
- G-BMAFM
- G-BMAFR
- G-BMAL
- G-BMALM
- G-BMAS
- G-BMASR
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 6 Days or Less
- 7 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Fitting for Hydraulic Pressure / Water Pressure, Long Straight Type, Male Thread for Both PT / PF, -Long Straight / Female-
MISUMI Standard Price : 13.10 € Shipping Days: 5 Days
-
Hydraulic Fittings / 90 Deg. Elbow / PT Threaded / PF Tapped
MISUMI Standard Price : 7.67 € Shipping Days: 5 Days
-
Swivel Joints / Straight / 90 Deg. Elbow / PT Threaded / PT / PF Tapped / Threaded
MISUMI Standard Price : 32.74 € Shipping Days: 5 Days
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.