Szűrési feltételek
- Material
- Surface Treatment
- Block Size(mm)
- Number of Circuits(Circuits)
- 6
- Thread Size / Type
- Mounting Hole Change
- Pitch P(mm)[40–60/1mm egység]
- Pitch Standard / Configurable
- Application
- Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
- 2
- 3
- 4
- 6
- Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
- 2
- 3
- 4
- 6
- Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
- 2
- 3
- 4
- 6
- Type
- CAD
- 2D
- 3D
- Becsült szállítási napok
- Minden
- 9 munkanapok belül
Manifold Hydraulic / Outlets 3 Sides / No Inlets
Vázlatrajz és specifikációs táblázat
| Type | Material | Surface Treatment | Max. Operating Pressure | |||||||
| Pitch (P) Standard | Pitch (P) Configurable | |||||||||
| 25 × 32 Sq. | 40 Sq. | 50 Sq. | 60 Sq. | 70 Sq. | 40 Sq. | 50 Sq. | 60 Sq. | |||
| BMAS | BMAFA | BMAFL | BMAFLK | BMAL | BMAFPA | BMAFLP | BMAFLKP | Steel for General Structure | Trivalent Chromate | 20.6 MPa ≈ 210 kgf/cm2 or less |
| — | BMAFMA | BMAFLM | — | BMALM | — | BMAFLMP | — | Electroless Nickel Plating | ||
| BMASR | BMAFRA | BMAFLR | — | — | — | — | — | SUS304 | — | |
| — | BMAFSA | — | — | — | — | — | — | SUS316 | ||
| — | BMAFCA | — | — | — | — | — | — | Brass | 1 MPa ≈ 10 kgf/cm2 or less | |
Specification Table
| Part Number | — | Q | — | R | — | S | — | P | ||||||
| Type | Mounting Hole Change | Number of Circuits | ||||||||||||
| BMAF BMAFLP G−BMAFLP | NA NA | 4 3 3 | — — — | Q3 Q3 Q3 | — — — | R2 R4 R4 | — — — | S3 S4 S4 | — — | P45 P45 | (G Thread) | |||
| Part Number | Rc (PT), NPT Selection | Pitch P | Number of Pitches N | Total Number of Q, R and S Threads | A | B | E | F | X | Y | Mounting Hole | ||||
| Type | Mounting Hole Change | Number of Circuits | Q, R, S | Standard | Configurable 1mm Increment | M | |||||||||
| (25x32 Sq.) | NA (Through) T (Tapped) ZT (Counterbore Tapped) YZ (Side Counterbore) YN (Side Through) | 1 | 1 (1/8) | - | - | 0 | 3 | 25 | 32 | 20 | 16 | 7.5 | 7 | M5 | |
| Pitch Standard BMAS BMASR | 2 | 25 | 1 | 6 | |||||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 5 | 18 | |||||||||||||
| 7 | 6 | 21 | |||||||||||||
| 8 | 7 | 24 | |||||||||||||
| (40 Sq.) | 1 | - | - | 0 | 3 | 40 | 40 | 25 | 20 | 7.5 | 7 | M6 | |||
| Pitch Standard BMAFA BMAFMA BMAFRA BMAFSA BMAFCA | Pitch Configurable BMAFPA | 2 | 1 (1/8) | 40 | 25~50 | 1 | 6 | ||||||||
| 3 | 2 (1/4) | 2 | 9 | ||||||||||||
| 4 | 3 (3/8) | 3 | 12 | ||||||||||||
| 5 | 1N (NPT1/8) | 4 | 15 | ||||||||||||
| 6 | 2N (NPT1/4) | 30~50 | 5 | 18 | |||||||||||
| 7 | 3N (NPT3/8) | 6 | 21 | ||||||||||||
| (Standard Change: E dimension) | 8 | 7 | 24 | ||||||||||||
| (50 Sq.) | 1 | - | - | 0 | 3 | 50 | 50 | 30 | 25 | 7.5 | 8 | M8 | |||
| Pitch Standard BMAFL BMAFLM BMAFLR | Pitch Configurable BMAFLP BMAFLMP | 2 | 2 (1/4) | 60 | 35~60 | 1 | 6 | ||||||||
| 3 | 3 (3/8) | 2 | 9 | ||||||||||||
| 4 | 4 (1/2) | 3 | 12 | ||||||||||||
| 5 | 6 (3/4) | 4 | 15 | ||||||||||||
| 6 | 40~60 | 5 | 18 | ||||||||||||
| (60 Sq.) | 1 | - | - | 0 | 3 | 60 | 60 | 30 | 30 | 7.5 | 8 | M8 | |||
| Pitch Standard BMAFLK | Pitch Configurable BMAFLKP | 2 | 2 (1/4) | 60 | 35~60 | 1 | 6 | ||||||||
| 3 | 3 (3/8) | 2 | 9 | ||||||||||||
| 4 | 4 (1/2) | 3 | 12 | ||||||||||||
| 5 | 6 (3/4) | 4 | 15 | ||||||||||||
| 6 | 40~60 | 5 | 18 | ||||||||||||
| (70 Sq.) | 1 | - | - | 0 | 3 | 70 | 70 | 40 | 35 | 10 | 10 | M8 | |||
| Pitch Standard BMAL BMALM | 2 | 6 (3/4) | 60 | 1 | 6 | ||||||||||
| 3 | 8 (1) | 2 | 9 | ||||||||||||
| 4 | 3 | 12 | |||||||||||||
For Q, R and S, specify 1, 2, 3, 4, 6, 8, 1N, 2N or 3N indicated before ( ).
Single Circuit is not available for Pitch Configurable Type.
SUS316 or Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.
For Block Square 50 Type, when 3/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square 60 Type instead.
Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types .
Részletes információk
Alapvető információk
Hydraulic manifold blocks. G (PF) thread machining can also be specified.