Plastic sleeves / with female thread / POM / MC nylon

Click on this image to zoom in.

View the FAQ (4)

MISUMI

Resin collars with inner diameter of the internal thread type.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Plastic Washers/Plastic Sleeves

Technical Drawing - Plastic Washers

Resin Collars/Tapped/POM/MC Nylon:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Plastic Washers

Type	Material
CLJTJ	Polyacetal
CLJTM	MC Nylon (Standard Grade - Blue)

Material Properties >> P.141

Further specifications can be found under the tab More information.

Composition of a Product Code - Plastic Washers

Part Number	-	D	-	L
CLJTM10	-	D30	-	L30

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
CLJTJ4-D[10-20/0.5]-L[10-60/0.5]
CLJTJ4-D[21-60/1]-L[10-60/0.5]
CLJTJ5-D[10-20/0.5]-L[10-60/0.5]
CLJTJ5-D[21-60/1]-L[10-60/0.5]
CLJTJ6-D[10-20/0.5]-L[10-60/0.5]
CLJTJ6-D[21-60/1]-L[10-60/0.5]
CLJTJ8-D[10-20/0.5]-L[10-60/0.5]
CLJTJ8-D[21-60/1]-L[10-60/0.5]
CLJTJ8A-D[10-20/0.5]-L[10-60/0.5]
CLJTJ8A-D[21-60/1]-L[10-60/0.5]
CLJTJ10-D[10-20/0.5]-L[10-60/0.5]
CLJTJ10-D[21-60/1]-L[10-60/0.5]
CLJTJ12-D[10-20/0.5]-L[10-60/0.5]
CLJTJ12-D[21-60/1]-L[10-60/0.5]
CLJTJ12A-D[10-20/0.5]-L[10-60/0.5]
CLJTJ12A-D[21-60/1]-L[10-60/0.5]
CLJTJ16-D[10-20/0.5]-L[10-60/0.5]
CLJTJ16-D[21-60/1]-L[10-60/0.5]
CLJTJ18A-D[10-20/0.5]-L[10-60/0.5]
CLJTJ18A-D[21-60/1]-L[10-60/0.5]
CLJTJ20-D[10-20/0.5]-L[10-60/0.5]
CLJTJ20-D[21-60/1]-L[10-60/0.5]
CLJTM4-D[10-20/0.5]-L[10-25/0.5]
CLJTM4-D[21-60/1]-L[10-25/0.5]
CLJTM5-D[10-20/0.5]-L[10-35/0.5]
CLJTM5-D[21-60/1]-L[10-35/0.5]
CLJTM6-D[10-20/0.5]-L[10-60/0.5]
CLJTM6-D[21-60/1]-L[10-60/0.5]
CLJTM8-D[10-20/0.5]-L[10-60/0.5]
CLJTM8-D[21-60/1]-L[10-60/0.5]
CLJTM8A-D[10-20/0.5]-L[10-60/0.5]
CLJTM8A-D[21-60/1]-L[10-60/0.5]
CLJTM10-D[10-20/0.5]-L[10-60/0.5]
CLJTM10-D[21-60/1]-L[10-60/0.5]
CLJTM12-D[10-20/0.5]-L[10-60/0.5]
CLJTM12-D[21-60/1]-L[10-60/0.5]
CLJTM12A-D[10-20/0.5]-L[10-60/0.5]
CLJTM12A-D[21-60/1]-L[10-60/0.5]
CLJTM16-D[10-20/0.5]-L[10-60/0.5]
CLJTM16-D[21-60/1]-L[10-60/0.5]
CLJTM18A-D[10-20/0.5]-L[10-60/0.5]
CLJTM18A-D[21-60/1]-L[10-60/0.5]
CLJTM20-D[10-20/0.5]-L[10-60/0.5]
CLJTM20-D[21-60/1]-L[10-60/0.5]

Minimum order quantity	Standard Shipping Days ?	RoHS	Outer Diameter (mm)	Thickness and length	Material	Material Detail	Screw Dia. M (Pitch)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	4 (x 0.7)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	4 (x 0.7)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	5 (x 0.8)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	5 (x 0.8)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	6 (x 1.0)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	6 (x 1.0)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	8 (x 1.25)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	8 (x 1.25)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	8 (x 1.0)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	8 (x 1.0)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	10 (x 1.5)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	10 (x 1.5)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	12 (x 1.75)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	12 (x 1.75)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	12 (x 1.0)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	12 (x 1.0)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	16 (x 2.0)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	16 (x 2.0)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	18 (x 1.0)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	18 (x 1.0)
1	6 Days	10	10 ～ 20	10 ～ 60	Polyacetal	Polyacetal	20 (x 2.5)
1	6 Days	10	21 ～ 60	10 ～ 60	Polyacetal	Polyacetal	20 (x 2.5)
1	6 Days	10	10 ～ 20	10 ～ 25	MC Nylon	MC Nylon	4 (x 0.7)
1	6 Days	10	21 ～ 60	10 ～ 25	MC Nylon	MC Nylon	4 (x 0.7)
1	6 Days	10	10 ～ 20	10 ～ 35	MC Nylon	MC Nylon	5 (x 0.8)
1	6 Days	10	21 ～ 60	10 ～ 35	MC Nylon	MC Nylon	5 (x 0.8)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	6 (x 1.0)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	6 (x 1.0)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	8 (x 1.25)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	8 (x 1.25)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	8 (x 1.0)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	8 (x 1.0)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	10 (x 1.5)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	10 (x 1.5)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	12 (x 1.75)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	12 (x 1.75)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	12 (x 1.0)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	12 (x 1.0)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	16 (x 2.0)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	16 (x 2.0)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	18 (x 1.0)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	18 (x 1.0)
1	6 Days	10	10 ～ 20	10 ～ 60	MC Nylon	MC Nylon	20 (x 2.5)
1	6 Days	10	21 ～ 60	10 ～ 60	MC Nylon	MC Nylon	20 (x 2.5)

Back to the Category Plastic Washers/Plastic Sleeves

Technical Drawing - Plastic Washers

Open the technical drawing in the new window

Specification Tables - Plastic Washers

■Resin Collar-Tapped

Part Number		D	L	Unit Price
Type	M(xPitch)	D	0.5mm Increment	CLJTJ	CLJTM
CLJTJ CLJTM	4 (x0.7) 5 (x0.8) 6 (x1.0) 8 (x1.25) 8A (x1.0) 10 (x1.5) 12 (x1.75) 12A (x1.0) 16 (x2.0) 18A (x1.0) 20 (x2.5)	10.0~20.0 (0.5mm Increment)	10.0~25.0
		10.0~20.0 (0.5mm Increment)	25.5~50
		21~30 (1mm Increment)	10.0~25.0
			25.5~50
			50.5~60
		31~40 (1mm Increment)	10.0~25.0
			25.5~50
			50.5~60
		41~50 (1mm Increment)	10.0~25.0
			25.5~50
			50.5~60
		51~60 (1mm Increment)	10.0~25.0
			25.5~50
			50.5~60
	D-M ≥6		L≤Mx3

General Information - Plastic Washers

Selection details of plastic washers/plastic sleeves

- Material: MC-nylon, polyacetal (POM), Bakelit, epoxy glass, polyether ether ketone (PEEK), fluoroplastic, polyslider, ceramic, polycarbonate (PC), polyamide (PA), polytetrafluoroethylene (PTFE), Duracon, Duranex, ABS, glass (lime-sodium glass)

- Outer diameter: 2 to 100 mm

- Inner diameter: 1 to 90 mm

- Thickness, length: 0.1 to 500 mm

- Forms: cylindrical, with collar, with pins, with countersunk bore, with guide, square washers

Description/Basics of plastic washers/plastic sleeves

Sleeves in general, are among the most commonly used machine elements to create a distance between two components. Plastic sleeves and ceramic sleeves offer added value compared to conventional metal collars.

Plastic sleeves and plastic sleeves with a collar have some advantages over their metallic counterparts. In addition to creating and maintaining a distance, they also have an insulating effect. The insulation effect refers to thermal insulation or electrical insulation depending on the material. In addition, their similarity to natural materials is greater than with metal sleeves. As a result, plastic washers and plastic sleeves (depending on the material) expand to the same extent under the influence of heat, such as wood or similar soft materials.

Plastic washers, as well as washers, enable an increase in surface compression. However, their resistance to pressure loads is lower depending on the material selected than that of a similarly large metal washer. For this purpose, the advantage of thermal and electrical insulation effects exists in plastic washers.

MISUMI also offers plastic washers and plastic sleeves with gliding properties. For example, washers and sleeves made of fluoroplastics are suitable for reducing friction resistances in hinge constructions. It should be noted that plastic sleeves do not replace plain bearings.

Polyether ether ketone (PEEK) has excellent thermal insulating properties. Depending on the strength and material composition, PEEK has a melting point of up to 300°C. It is therefore suitable, among other things, for insulating heating and cooling lines, for example. Due to the quality of the surface, the material has particularly good adhesive properties.

Polyacetal, also called POM, is characterized by its very good machinability and excellent mechanical properties. Polyacetal (POM) products are widely used in various branches of mechanical engineering.

At MISUMI you will find washers and sleeves made of various variants of MC Nylon. In addition to the standard version, a conductive and antistatic type is also offered. Thus, MC Nylon can be used in a wide variety of applications.

The different versions and shapes of the plastic washers and plastic sleeves allow utilising them in a wide variety of applications. Thus, plastic washers can be used, for example, as bearing mountings up to the assembly of printed circuit boards.

Application Examples

Plastic sleeve as thermally insulating spacer sleeve
(1) Plastic sleeves, (2) Cylindrical plastic sleeve, (3) Plastic washer, (4) Hexagon socket screws, (5) Washer, (6) Hexagon nut

Plastic sleeve as bearing ring
(1) Plastic sleeve with guide, (2) Rotary shaft, (3) Timing pulley, (4) Ball bearing (5) Bearing with housing, (6) Drive wheel

Products homepage

Basic information

Shape	Standard	Hole Type	Tapped Hole	Sale Type	Sold Separately

Configure

44Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Outer Diameter(mm)
[10-20/0.5mm Unit(s)][21-60/1mm Unit(s)]
Clear
Thickness and length
[10-60/0.5]
Clear
Material
- MC Nylon
- Polyacetal
Clear
Material Detail
MC Nylon

Polyacetal
Clear
Screw Dia. M (Pitch)
4 (x 0.7)

5 (x 0.8)

6 (x 1.0)

8 (x 1.0)

8 (x 1.25)

10 (x 1.5)

12 (x 1.0)

12 (x 1.75)

16 (x 2.0)

18 (x 1.0)

20 (x 2.5)
Clear
Type
- CLJTJ
- CLJTM
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

6 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Do ceramic washers have the same strength as ceramic sleeves?: Answer:
Due to a radial lamination of the ceramic material, ceramic sleeves have a lower compressive strength than ceramic washers (vertically laminated). Detailed information and comparison values can be found here.
Question:
What is the thermal expansion of plastic sleeves and plastic washers?: Answer:
Plastic sleeves and plastic washers react sensitively to fluctuations in ambient temperature. The length of synthetic resin sleeves varies depending in a ratio of up to 1°C = 0.1 mm depending on the temperature . Details on the thermal expansion of other materials available at MISUMI can be found in this PDF.
Question:
Do you have washers made of a material that provide electric insulation?: Answer:
Most plastics have an electrically insulating effect. The level of insulation differs depending on the material. Polycarbonate has a very good electrically insulating effect. In addition to its good electrical insulating effect, it is also superior to most conventional plastics in terms of mechanical aspects.
Question:
Which material is suitable for both low and high temperatures?: Answer:
Polyether ether ketone (PEEK) and polytetrafluoroethylene (PTFE) have an operating temperature of approx. -50°C (PEEK), respectively -40°C (PTFE) and up to +250°C.