Slot Pins for Inspection Jigs / Stepped and Threaded Type

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Slot Pins for Inspection Jigs/Stepped and Threaded Type:Related Image

Material¹	Hardness	Type
Material¹	Hardness	P 0 -0.02	P_g6
EN 1.1191 Equiv.	-	KJPM	KJPGM
EN 1.1191 Equiv.	45HRC~	KJPMH	KJPGMH
EN 1.4301 Equiv.	-	KJPMS	KJPGMS
² EN 1.4037 Equiv.	45~50HRC	KJPMC	KJPGMC

Specifications

Part Number (TYPE, D)	-	P	-	M	-	L	-	B
KJPMH16	-	P11.20	-	M6	-	L15	-	B10

Part Number			0.01mm Increment	M(P≥M) Selection								1mm Increment
Type		D	P									L	B
(P 0 -0.02)	(P_g6)	D	P									L	B
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4037 Equiv.) KJPMC	(EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4037 Equiv.) KJPGMC	8	4.00~ 6.00	3	4							0~35 (L≤Px4) When L=0, specify P as 0.	5~25 (M<B≤Mx3) For M3 (5≤B≤Mx2)
		10	5.00~ 8.00		4	5	6	8
		12	5.00~10.00		4	5	6	8	10	S10
		16	8.00~14.00		4	5	6	8	10	S10	12
		20	10.00~18.00			5	6	8	10	S10	12
		25	15.00~23.00			5	6	8	10	S10	12
		10L	10.00~16.00		4	5	6	8	10	S10
		12L	12.00~20.00			5	6	8	10	S10	12
		16L	16.00~25.00				6	8	10	S10	12	(L+B≤50)
		20L	20.00~30.00				6	8	10	S10	12	(L+B≤50)

S10 is fine thread (pitch 1.25). KJPND, KJPNDS (previous page) are more economical when L=0.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
KJPGMC8-P0-M[3,4]-L0-B[5-25/1]
KJPGMC8-P0-M[3,4]-L[0-35/1]-B[5-25/1]
KJPGMC8-P[4-6/0.01]-M[3,4]-L0-B[5-25/1]
KJPGMC8-P[4-6/0.01]-M[3,4]-L[0-35/1]-B[5-25/1]
KJPGMC10-P0-M[4,5,6,8]-L0-B[5-25/1]
KJPGMC10-P0-M[4,5,6,8]-L[0-35/1]-B[5-25/1]
KJPGMC10-P[5-8/0.01]-M[4,5,6,8]-L0-B[5-25/1]
KJPGMC10-P[5-8/0.01]-M[4,5,6,8]-L[0-35/1]-B[5-25/1]
KJPGMC12-P0-M[4,5,6,8,10]-L0-B[5-25/1]
KJPGMC12-P0-M[4,5,6,8,10]-L[0-35/1]-B[5-25/1]
KJPGMC12-P0-MS10-L0-B[5-25/1]
KJPGMC12-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGMC12-P[5-10/0.01]-M[4,5,6,8,10]-L0-B[5-25/1]
KJPGMC12-P[5-10/0.01]-M[4,5,6,8,10]-L[0-35/1]-B[5-25/1]
KJPGMC12-P[5-10/0.01]-MS10-L0-B[5-25/1]
KJPGMC12-P[5-10/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGMC16-P0-M[4,5,6,8,10,12]-L0-B[5-25/1]
KJPGMC16-P0-M[4,5,6,8,10,12]-L[0-35/1]-B[5-25/1]
KJPGMC16-P0-MS10-L0-B[5-25/1]
KJPGMC16-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGMC16-P[8-14/0.01]-M[4,5,6,8,10,12]-L0-B[5-25/1]
KJPGMC16-P[8-14/0.01]-M[4,5,6,8,10,12]-L[0-35/1]-B[5-25/1]
KJPGMC16-P[8-14/0.01]-MS10-L0-B[5-25/1]
KJPGMC16-P[8-14/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGMC20-P0-M[5,6,8,10,12]-L0-B[5-25/1]
KJPGMC20-P0-M[5,6,8,10,12]-L[0-35/1]-B[5-25/1]
KJPGMC20-P0-MS10-L0-B[5-25/1]
KJPGMC20-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGMC20-P[10-18/0.01]-M[5,6,8,10,12]-L0-B[5-25/1]
KJPGMC20-P[10-18/0.01]-M[5,6,8,10,12]-L[0-35/1]-B[5-25/1]
KJPGMC20-P[10-18/0.01]-MS10-L0-B[5-25/1]
KJPGMC20-P[10-18/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGMC25-P0-M[5,6,8,10,12]-L0-B[5-25/1]
KJPGMC25-P0-M[5,6,8,10,12]-L[0-35/1]-B[5-25/1]
KJPGMC25-P0-MS10-L0-B[5-25/1]
KJPGMC25-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGMC25-P[15-23/0.01]-M[5,6,8,10,12]-L0-B[5-25/1]
KJPGMC25-P[15-23/0.01]-M[5,6,8,10,12]-L[0-35/1]-B[5-25/1]
KJPGMC25-P[15-23/0.01]-MS10-L0-B[5-25/1]
KJPGMC25-P[15-23/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGMS8-P0-M[3,4]-L0-B[5-25/1]
KJPGMS8-P0-M[3,4]-L[0-35/1]-B[5-25/1]
KJPGMS8-P[4-6/0.01]-M[3,4]-L0-B[5-25/1]
KJPGMS8-P[4-6/0.01]-M[3,4]-L[0-35/1]-B[5-25/1]
KJPGMS10-P0-M[4,5,6,8]-L0-B[5-25/1]
KJPGMS10-P0-M[4,5,6,8]-L[0-35/1]-B[5-25/1]
KJPGMS10-P[5-8/0.01]-M[4,5,6,8]-L0-B[5-25/1]
KJPGMS10-P[5-8/0.01]-M[4,5,6,8]-L[0-35/1]-B[5-25/1]
KJPGMS12-P0-M[4,5,6,8,10]-L0-B[5-25/1]
KJPGMS12-P0-M[4,5,6,8,10]-L[0-35/1]-B[5-25/1]
KJPGMS12-P0-MS10-L0-B[5-25/1]
KJPGMS12-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGMS12-P[5-10/0.01]-M[4,5,6,8,10]-L0-B[5-25/1]
KJPGMS12-P[5-10/0.01]-M[4,5,6,8,10]-L[0-35/1]-B[5-25/1]
KJPGMS12-P[5-10/0.01]-MS10-L0-B[5-25/1]
KJPGMS12-P[5-10/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGMS16-P0-M[4,5,6,8,10,12]-L0-B[5-25/1]
KJPGMS16-P0-M[4,5,6,8,10,12]-L[0-35/1]-B[5-25/1]
KJPGMS16-P0-MS10-L0-B[5-25/1]
KJPGMS16-P0-MS10-L[0-35/1]-B[5-25/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Hardness	Large Head/Small Head	Insertion Part P Dimension Tolerance	Outer Dia. D (Ø)	B (mm)	L (mm)	P (mm)	Thread Dia. Selection (Coarse) [M] (mm)	Thread Dia. Selection (Fine) [MS] (mm)
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	8	5 ～ 25	-	0	3 ～ 4	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	8	5 ～ 25	0 ～ 35	0	3 ～ 4	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	8	5 ～ 25	-	4 ～ 6	3 ～ 4	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	8	5 ～ 25	0 ～ 35	4 ～ 6	3 ～ 4	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	10	5 ～ 25	-	0	4 ～ 8	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	10	5 ～ 25	0 ～ 35	0	4 ～ 8	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	10	5 ～ 25	-	5 ～ 8	4 ～ 8	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	10	5 ～ 25	0 ～ 35	5 ～ 8	4 ～ 8	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	12	5 ～ 25	-	0	4 ～ 10	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	12	5 ～ 25	0 ～ 35	0	4 ～ 10	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	12	5 ～ 25	-	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	12	5 ～ 25	0 ～ 35	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	12	5 ～ 25	-	5 ～ 10	4 ～ 10	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	12	5 ～ 25	0 ～ 35	5 ～ 10	4 ～ 10	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	12	5 ～ 25	-	5 ～ 10	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	12	5 ～ 25	0 ～ 35	5 ～ 10	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	16	5 ～ 25	-	0	4 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	16	5 ～ 25	0 ～ 35	0	4 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	16	5 ～ 25	-	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	16	5 ～ 25	0 ～ 35	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	16	5 ～ 25	-	8 ～ 14	4 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	16	5 ～ 25	0 ～ 35	8 ～ 14	4 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	16	5 ～ 25	-	8 ～ 14	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	16	5 ～ 25	0 ～ 35	8 ～ 14	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	20	5 ～ 25	-	0	5 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	20	5 ～ 25	0 ～ 35	0	5 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	20	5 ～ 25	-	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	20	5 ～ 25	0 ～ 35	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	20	5 ～ 25	-	10 ～ 18	5 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	20	5 ～ 25	0 ～ 35	10 ～ 18	5 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	20	5 ～ 25	-	10 ～ 18	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	20	5 ～ 25	0 ～ 35	10 ～ 18	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	25	5 ～ 25	-	0	5 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	25	5 ～ 25	0 ～ 35	0	5 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	25	5 ～ 25	-	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	25	5 ～ 25	0 ～ 35	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	25	5 ～ 25	-	15 ～ 23	5 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	25	5 ～ 25	0 ～ 35	15 ～ 23	5 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	25	5 ～ 25	-	15 ～ 23	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4037 Equiv.	45 ~ 50HRC	Small Head	g6	25	5 ～ 25	0 ～ 35	15 ～ 23	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	8	5 ～ 25	-	0	3 ～ 4	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	8	5 ～ 25	0 ～ 35	0	3 ～ 4	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	8	5 ～ 25	-	4 ～ 6	3 ～ 4	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	8	5 ～ 25	0 ～ 35	4 ～ 6	3 ～ 4	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	10	5 ～ 25	-	0	4 ～ 8	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	10	5 ～ 25	0 ～ 35	0	4 ～ 8	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	10	5 ～ 25	-	5 ～ 8	4 ～ 8	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	10	5 ～ 25	0 ～ 35	5 ～ 8	4 ～ 8	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	12	5 ～ 25	-	0	4 ～ 10	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	12	5 ～ 25	0 ～ 35	0	4 ～ 10	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	12	5 ～ 25	-	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	12	5 ～ 25	0 ～ 35	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	12	5 ～ 25	-	5 ～ 10	4 ～ 10	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	12	5 ～ 25	0 ～ 35	5 ～ 10	4 ～ 10	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	12	5 ～ 25	-	5 ～ 10	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	12	5 ～ 25	0 ～ 35	5 ～ 10	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	16	5 ～ 25	-	0	4 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	16	5 ～ 25	0 ～ 35	0	4 ～ 12	-
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	16	5 ～ 25	-	0	-	10
-	1	10 Days	10	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	Small Head	g6	16	5 ～ 25	0 ～ 35	0	-	10

Products homepage

Basic information

Type	Slot Pin	Shape	Straight	Tip Shape	Circular Shape
Tip Type	Threads	Shape of Stepped Section	Circular Shape	Stepped	Single-Row Type

Configure

160Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Hardness
- 45HRC ~
- 45 ~ 50HRC
- No Hardened
Clear
Large Head/Small Head
- Large Head
- Small Head
Clear
Insertion Part P Dimension Tolerance
- 0/-0.02
- g6
Clear
Outer Dia. D(Ø)
8

10

12

16

20

25
Clear
B(mm)
[5-25/1mm Unit(s)]
Clear
L(mm)
[0-35/1mm Unit(s)]
Clear
P(mm)
0
[4-23/0.01mm Unit(s)]
Clear
Thread Dia. Selection (Coarse) [M](mm)
3

4

5

6

8

10

12
Clear
Thread Dia. Selection (Fine) [MS](mm)
10
Clear
Type
- KJPGM
- KJPGMC
- KJPGMH
- KJPGMS
- KJPM
- KJPMC
- KJPMH
- KJPMS
Clear
Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
  - EN 1.4301 Equiv.
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

10 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

Inspection Jigs / Pin Clips
MISUMI Standard Price : 3.29 € Shipping Days: Same day
Inspection Jigs / Wires for Pins
MISUMI Shipping Days: 10 Days
[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -