Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type

Click on this image to zoom in.

[Features] Tapered test pin that can pre-set a diamond shape. -You can choose between 2 shapes.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Shipping Days
Catalog

Material1	Hardness	Round Tip		D-Shape Tip
		Type		Type
		S 0 -0.02	S_g6	S 0 -0.02/F 0 -0.05	S_g6/F 0 -0.03
EN 1.1191 Equiv.	-	KJPDTKM	KJPGDTKM	KJPDTK	KJPGDTK
EN 1.1191 Equiv.	45HRC~	KJPDTKMH	KJPGDTKMH	KJPDTHK	KJPGDTHK
EN 1.4301 Equiv.	-	KJPDTKMS	KJPGDTKMS	KJPDTKS	KJPGDTKS
² EN 1.4037 Equiv.	45~50HRC	KJPDTKMC	KJPGDTKMC	KJPDTKC	KJPGDTKC

Specifications

Part Number (TYPE, D)	-	P	-	S	-	F	-	B
KJPDTK12L	-	P16.00	-	S8.00	-	F2.2	-	B10

S	g6
3.00	-0.002 -0.008
3.01~ 6.00	-0.004 -0.012
6.01~10.00	-0.005 -0.014
10.01~18.00	-0.006 -0.017
18.01~29.00	-0.007 -0.020

Part Number					0.01mm Increment		0.1mm Increment	1mm Increment	(W)	M
Round Tip		D-Shape Tip		D	P	S(P-1≥S)	F(F<S/₂) D-Shape Tip only	B
S 0 -0.02	S_g6	S 0 -0.02/F 0 -0.05	S_g6/F 0 -0.03	D	P	S(P-1≥S)	F(F<S/₂) D-Shape Tip only	B
(EN 1.1191 Equiv.) KJPDTKM (EN 1.1191 Equiv. Hardened) KJPDTKMH (EN 1.4301 Equiv.) KJPDTKMS (EN 1.4037 Equiv.) KJPDTKMC	(EN 1.1191 Equiv.) KJPGDTKM (EN 1.1191 Equiv. Hardened) KJPGDTKMH (EN 1.4301 Equiv.) KJPGDTKMS (EN 1.4037 Equiv.) KJPGDTKMC	(EN 1.1191 Equiv.) KJPDTK (EN 1.1191 Equiv. Hardened) KJPDTHK (EN 1.4301 Equiv.) KJPDTKS (EN 1.4037 Equiv.) KJPDTKC	(EN 1.1191 Equiv.) KJPGDTK (EN 1.1191 Equiv. Hardened) KJPGDTHK (EN 1.4301 Equiv.) KJPGDTKS (EN 1.4037 Equiv.) KJPGDTKC	8	4.00~ 6.00	3.00~ 5.00	0.3~ 2.0	5~25 For EN 1.4301 Equiv., B≤Sx5	2	M4
				10	4.00~ 8.00	3.00~ 7.00	0.3~ 3.0		2	M5
				12	6.00~10.00	3.00~ 9.00	0.3~ 4.0		3
				16	8.00~14.00	3.00~13.00	0.5~ 6.0		4
				20	12.00~18.00	5.00~17.00	1.0~ 8.0		6
				25	16.00~23.00	8.00~22.00	2.0~10.0		8
				10L	10.00~16.00	5.00~15.00	1.0~ 7.0		4
				12L	12.00~20.00	6.00~19.00	2.0~ 9.0		6
				16L	16.00~25.00	8.00~24.00	2.0~11.0		8
				20L	20.00~30.00	10.00~29.00	2.0~14.0		8

Large Head Type (D=10L ~ 20L) is available for EN 1.1191 Equiv. only. Please select S dimension so that S section is smaller than the diamond section.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
KJPDTHK8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPDTHK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPDTHK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPDTHK12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPDTHK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPDTHK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTHK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPDTHK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTHK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPDTHK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPDTK8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPDTK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPDTK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPDTK12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPDTK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPDTK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPDTK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPDTK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPDTKM8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTKM10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTKM10L-P[10-16/0.01]-S[5-15/0.01]-B[5-25/1]
KJPDTKM12-P[6-10/0.01]-S[3-9/0.01]-B[5-25/1]
KJPDTKM12L-P[12-20/0.01]-S[6-19/0.01]-B[5-25/1]
KJPDTKM16-P[8-14/0.01]-S[3-13/0.01]-B[5-25/1]
KJPDTKM16L-P[16-25/0.01]-S[8-24/0.01]-B[5-25/1]
KJPDTKM20-P[12-18/0.01]-S[5-17/0.01]-B[5-25/1]
KJPDTKM20L-P[20-30/0.01]-S[10-29/0.01]-B[5-25/1]
KJPDTKM25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1]
KJPDTKMH8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTKMH10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTKMH10L-P[10-16/0.01]-S[5-15/0.01]-B[5-25/1]
KJPDTKMH12-P[6-10/0.01]-S[3-9/0.01]-B[5-25/1]
KJPDTKMH12L-P[12-20/0.01]-S[6-19/0.01]-B[5-25/1]
KJPDTKMH16-P[8-14/0.01]-S[3-13/0.01]-B[5-25/1]
KJPDTKMH16L-P[16-25/0.01]-S[8-24/0.01]-B[5-25/1]
KJPDTKMH20-P[12-18/0.01]-S[5-17/0.01]-B[5-25/1]
KJPDTKMH20L-P[20-30/0.01]-S[10-29/0.01]-B[5-25/1]
KJPDTKMH25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1]
KJPGDTHK8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPGDTHK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPGDTHK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPGDTHK12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPGDTHK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPGDTHK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPGDTHK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPGDTHK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPGDTHK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPGDTHK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPGDTK8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPGDTK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPGDTK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPGDTK12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPGDTK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPGDTK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPGDTK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPGDTK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPGDTK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPGDTK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Tip Shape	Material	Hardness	Large Head/Small Head	Insertion Part S Dimension Tolerance	Outer Dia. D (Ø)	B (mm)	F (mm)	P (mm)	S (mm)
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	8	5 ～ 25	0.3 ～ 2	4 ～ 6	3 ～ 5
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	10	5 ～ 25	0.3 ～ 3	4 ～ 8	3 ～ 7
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	0/-0.02	10	5 ～ 25	1 ～ 7	10 ～ 16	5 ～ 15
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	12	5 ～ 25	0.3 ～ 4	6 ～ 10	3 ～ 9
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	0/-0.02	12	5 ～ 25	2 ～ 9	12 ～ 20	6 ～ 19
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	16	5 ～ 25	0.5 ～ 6	8 ～ 14	3 ～ 13
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	0/-0.02	16	5 ～ 25	2 ～ 11	16 ～ 25	8 ～ 24
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	20	5 ～ 25	1 ～ 8	12 ～ 18	5 ～ 17
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	0/-0.02	20	5 ～ 25	2 ～ 14	20 ～ 30	10 ～ 29
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	25	5 ～ 25	2 ～ 10	16 ～ 23	8 ～ 22
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	8	5 ～ 25	0.3 ～ 2	4 ～ 6	3 ～ 5
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	10	5 ～ 25	0.3 ～ 3	4 ～ 8	3 ～ 7
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	0/-0.02	10	5 ～ 25	1 ～ 7	10 ～ 16	5 ～ 15
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	12	5 ～ 25	0.3 ～ 4	6 ～ 10	3 ～ 9
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	0/-0.02	12	5 ～ 25	2 ～ 9	12 ～ 20	6 ～ 19
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	16	5 ～ 25	0.5 ～ 6	8 ～ 14	3 ～ 13
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	0/-0.02	16	5 ～ 25	2 ～ 11	16 ～ 25	8 ～ 24
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	20	5 ～ 25	1 ～ 8	12 ～ 18	5 ～ 17
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	0/-0.02	20	5 ～ 25	2 ～ 14	20 ～ 30	10 ～ 29
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	25	5 ～ 25	2 ～ 10	16 ～ 23	8 ～ 22
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	8	5 ～ 25	-	4 ～ 6	3 ～ 5
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	10	5 ～ 25	-	4 ～ 8	3 ～ 7
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	0/-0.02	10	5 ～ 25	-	10 ～ 16	5 ～ 15
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	12	5 ～ 25	-	6 ～ 10	3 ～ 9
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	0/-0.02	12	5 ～ 25	-	12 ～ 20	6 ～ 19
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	16	5 ～ 25	-	8 ～ 14	3 ～ 13
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	0/-0.02	16	5 ～ 25	-	16 ～ 25	8 ～ 24
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	20	5 ～ 25	-	12 ～ 18	5 ～ 17
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Large Head	0/-0.02	20	5 ～ 25	-	20 ～ 30	10 ～ 29
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	25	5 ～ 25	-	16 ～ 23	8 ～ 22
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	8	5 ～ 25	-	4 ～ 6	3 ～ 5
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	10	5 ～ 25	-	4 ～ 8	3 ～ 7
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	0/-0.02	10	5 ～ 25	-	10 ～ 16	5 ～ 15
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	12	5 ～ 25	-	6 ～ 10	3 ～ 9
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	0/-0.02	12	5 ～ 25	-	12 ～ 20	6 ～ 19
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	16	5 ～ 25	-	8 ～ 14	3 ～ 13
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	0/-0.02	16	5 ～ 25	-	16 ～ 25	8 ～ 24
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	20	5 ～ 25	-	12 ～ 18	5 ～ 17
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	0/-0.02	20	5 ～ 25	-	20 ～ 30	10 ～ 29
-	1	10 Days	10	Circular Shape	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	0/-0.02	25	5 ～ 25	-	16 ～ 23	8 ～ 22
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	g6	8	5 ～ 25	0.3 ～ 2	4 ～ 6	3 ～ 5
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	g6	10	5 ～ 25	0.3 ～ 3	4 ～ 8	3 ～ 7
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	g6	10	5 ～ 25	1 ～ 7	10 ～ 16	5 ～ 15
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	g6	12	5 ～ 25	0.3 ～ 4	6 ～ 10	3 ～ 9
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	g6	12	5 ～ 25	2 ～ 9	12 ～ 20	6 ～ 19
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	g6	16	5 ～ 25	0.5 ～ 6	8 ～ 14	3 ～ 13
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	g6	16	5 ～ 25	2 ～ 11	16 ～ 25	8 ～ 24
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	g6	20	5 ～ 25	1 ～ 8	12 ～ 18	5 ～ 17
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Large Head	g6	20	5 ～ 25	2 ～ 14	20 ～ 30	10 ～ 29
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	45HRC ~	Small Head	g6	25	5 ～ 25	2 ～ 10	16 ～ 23	8 ～ 22
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	8	5 ～ 25	0.3 ～ 2	4 ～ 6	3 ～ 5
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	10	5 ～ 25	0.3 ～ 3	4 ～ 8	3 ～ 7
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	10L	5 ～ 25	1 ～ 7	10 ～ 16	5 ～ 15
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	12	5 ～ 25	0.3 ～ 4	6 ～ 10	3 ～ 9
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	12L	5 ～ 25	2 ～ 9	12 ～ 20	6 ～ 19
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	16	5 ～ 25	0.5 ～ 6	8 ～ 14	3 ～ 13
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	16L	5 ～ 25	2 ～ 11	16 ～ 25	8 ～ 24
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	20	5 ～ 25	1 ～ 8	12 ～ 18	5 ～ 17
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	20L	5 ～ 25	2 ～ 14	20 ～ 30	10 ～ 29
-	1	10 Days	10	D Cut	[Steel] EN 1.1191 Equiv.	No Hardened	Small Head	0/-0.02	25	5 ～ 25	2 ～ 10	16 ～ 23	8 ～ 22

Price List

D		Round Tip Unit Price								D-Shape Tip Unit Price
		S 0 -0.02				S_g6				S 0 -0.02/F 0 -0.05				S_g6/F 0 -0.03
		KJPDTKM	KJPDTKMH	KJPDTKMS	KJPDTKMC	KJPGDTKM	KJPGDTKMH	KJPGDTKMS	KJPGDTKMC	KJPDTK	KJPDTHK	KJPDTKS	KJPDTKC	KJPGDTK	KJPGDTHK	KJPGDTKS	KJPGDTKC
Small Head	8
	10
	12
	16
	20
	25
Large Head	10L			-	-			-	-			-	-			-	-
	12L			-	-			-	-			-	-			-	-
	16L			-	-			-	-			-	-			-	-
	20L			-	-			-	-			-	-			-	-

Products homepage

Basic information

Type	Slot Pin	Shape	Tapered	Tip Type	Straight
Shape of Stepped Section	Diamond

Configure

80Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Tip Shape
- Circular Shape
- D Cut
Clear
Hardness
- 45HRC ~
- 45 ~ 50HRC
- No Hardened
Clear
Large Head/Small Head
- Large Head
- Small Head
Clear
Insertion Part S Dimension Tolerance
- 0/-0.02
- g6
Clear
Outer Dia. D(Ø)
8

10

10L

12

12L

16

16L

20

20L

25
Clear
B(mm)
[5-25/1mm Unit(s)]
Clear
F(mm)
[0.3-14/0.1mm Unit(s)]
Clear
P(mm)
[4-30/0.01mm Unit(s)]
Clear
S(mm)
[3-29/0.01mm Unit(s)]
Clear
Type
- KJPDTHK
- KJPDTK
- KJPDTKC
- KJPDTKM
- KJPDTKMC
- KJPDTKMH
- KJPDTKMS
- KJPDTKS
- KJPGDTHK
- KJPGDTK
- KJPGDTKC
- KJPGDTKM
- KJPGDTKMC
- KJPGDTKMH
- KJPGDTKMS
- KJPGDTKS
Clear
Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
  - EN 1.4301 Equiv.
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

10 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -
Rough Guide / Standard
MISUMI Shipping Days: 11 Days
Centring bushes / collar / brass
MISUMI Shipping Days: 11 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day