Flanged drill bushes / groove / Bore +0.01 / steel, stainless steel / 50HRC, 60HRC

View the FAQ (8)

[Features] Bushing that prevents disassembly by a set screw. [Modification aid] Changing the depth of the threaded part of the set screw and changing the inner diameter R.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Bushings for Fixtures

Technical Drawing - Flanged Drill Bushes

Bushings for Locating Pins/Flanged:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Overview of the various designs as PDF

Basic Properties (e.g., material, hardness, coating, tolerance) - Flanged Drill Bushes

Material	Surface Treatment	Hardness	Type
Material	Surface Treatment	Hardness	p6	m6	h6
EN 1.2510 Equiv.	-	56~60HRC	JBHFPG	JBHFG	JBHG
EN 1.2510 Equiv.	Electroless Nickel Plating	56~60HRC	JBHFMPG	JBHFMG	JBHMG
EN 1.4037 Equiv.	-	50~55HRC	JBHFCPG	JBHFCG	-

Further specifications can be found under the tab More information.

Composition of a Product Code - Flanged Drill Bushes

Part Number	-	P	-	W	-	L
JBAFG8 JBHG20 JBHFYG18 JBFR10 JBPE10	- - - - -	P4.1 P13.0 P12.00 P6.0 P6.8	- -	W4.5 W4.8	- - - - -	L11 L20 L18.0 L10 L15

Alterations - Flanged Drill Bushes

General Information - Flanged Drill Bushes

Drill bushings - positioning bushings – centering bushings assortment - collar bushings – centering bushings with collar - ceramic bushing - bushing with mounting flange - stainless steel drill bushing

Selection between drill bushings / positioning bushings / centering bushings

- Material: steel, stainless steel, brass, ceramics

- Coatings: untreated, nickel-plated, burnished

- Hardness: 50HRC to 62HRC

- Fastening: with notch, mounting bracket, with dowel pin, pressed-in

- Inside diameter shape: round, oval

- ISO tolerances: g6, h6, m6, n6, p6, 0/-0.2, 0/-0.01

- Inside diameter: 2 mm to 35 mm

- Outside diameter: 5 mm to 48 mm

- Length: 3 mm to 60 mm

Here to the drill bushings Overview as PDF

Description / Basics

A drill bushing is intended for precise centering, positioning and guidance of drills. They can be used in drilling rigs or for multi-spindle drilling heads as well as a drilling jig. Therefore, it is possible to create an accurate and recurring bore at the same position in one component. In addition, through the guide the drill bushing protects the drill from breakage. The most common bushings are the collar drill bushing according to DIN 172 and the cylindrical drill bushing according to DIN 179.

Drill bushings and collar drill bushings are available in a variety of fastening types. They can be pressed in or secured with a semi-circular notch in the collar of the plug-in fulcrum pins. Since it is not pressed, this has the advantage of quick interchangeability. MISUMI also offers the special form of a flanged bushing with mounting flange.
Collar bushings with oval bores are also available at MISUMI. These are provided with a semi-circular notch in the collar, which, in combination with a dowel pin, serves to align the collar drill bushing.

Drill bushings are often used as positioning bushings or centering bushings.
Due to the rounded insertion of the drill bushing, it can serve as a joining opening for centering pins or height adjusting pins.

Application Examples - Flanged Drill Bushes

Application examples for centering bushing with collar - collar drill bushing with centering pin - stainless steel collar drill bushing

Example for using a centering bolt/centering bushing with collar
(1) Locating pin, (2) Bushings for fixtures

Application example for cylindrical drill bushing - drill bushing with centering pin – centering bushing - positioning bushing

Example for using a centering bolt/centering bushing
(1) Locating pin , (2) Bushings for fixtures, (3) Mounting plate

Application example for work piece carrier - positioning bushing – centering bushing - cylindrical drill bushing

Example for using a positioning bushing
(1) Bushings for fixtures

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
JBHFCG8-P[4-4.5/0.01]-L[8-10/0.1]
JBHFCG10-P[4-6.5/0.01]-L[8-15/0.1]
JBHFCG12-P[6-8.5/0.01]-L[8-15/0.1]
JBHFCG15-P[8-10.5/0.01]-L[10-35/0.1]
JBHFCG18-P[10-12.5/0.01]-L[10-35/0.1]
JBHFCG20-P[12-13.5/0.01]-L[10-35/0.1]
JBHFCG22-P[12-13.5/0.01]-L[10-35/0.1]
JBHFCG25-P[13-15.5/0.01]-L[10-35/0.1]
JBHFCG26-P[15-16.5/0.01]-L[10-35/0.1]
JBHFCG30-P[16-20.5/0.01]-L[12-50/0.1]
JBHFCG35-P[20-25/0.01]-L[12-50/0.1]
JBHFCPG8-P[4-4.5/0.01]-L[8-10/0.1]
JBHFCPG10-P[4-6.5/0.01]-L[8-15/0.1]
JBHFCPG12-P[6-8.5/0.01]-L[8-15/0.1]
JBHFCPG15-P[8-10.5/0.01]-L[10-35/0.1]
JBHFCPG18-P[10-12.5/0.01]-L[10-35/0.1]
JBHFCPG20-P[12-13.5/0.01]-L[10-35/0.1]
JBHFCPG22-P[12-13.5/0.01]-L[10-35/0.1]
JBHFCPG25-P[13-15.5/0.01]-L[10-35/0.1]
JBHFCPG26-P[15-16.5/0.01]-L[10-35/0.1]
JBHFCPG30-P[16-20.5/0.01]-L[12-50/0.1]
JBHFCPG35-P[20-25/0.01]-L[12-50/0.1]
JBHFG8-P[4-4.5/0.01]-L[8-10/0.1]
JBHFG10-P[4-6.5/0.01]-L[8-15/0.1]
JBHFG12-P[6-8.5/0.01]-L[8-15/0.1]
JBHFG15-P[8-10.5/0.01]-L[10-35/0.1]
JBHFG18-P[10-12.5/0.01]-L[10-35/0.1]
JBHFG20-P[12-13.5/0.01]-L[10-35/0.1]
JBHFG22-P[12-13.5/0.01]-L[10-35/0.1]
JBHFG25-P[13-15.5/0.01]-L[10-35/0.1]
JBHFG26-P[15-16.5/0.01]-L[10-35/0.1]
JBHFG30-P[16-20.5/0.01]-L[12-50/0.1]
JBHFG35-P[20-25/0.01]-L[12-50/0.1]
JBHFMG8-P[4-4.5/0.01]-L[8-10/0.1]
JBHFMG10-P[4-6.5/0.01]-L[8-15/0.1]
JBHFMG12-P[6-8.5/0.01]-L[8-15/0.1]
JBHFMG15-P[8-10.5/0.01]-L[10-35/0.1]
JBHFMG18-P[10-12.5/0.01]-L[10-35/0.1]
JBHFMG20-P[12-13.5/0.01]-L[10-35/0.1]
JBHFMG22-P[12-13.5/0.01]-L[10-35/0.1]
JBHFMG25-P[13-15.5/0.01]-L[10-35/0.1]
JBHFMG26-P[15-16.5/0.01]-L[10-35/0.1]
JBHFMG30-P[16-20.5/0.01]-L[12-50/0.1]
JBHFMG35-P[20-25/0.01]-L[12-50/0.1]
JBHFMPG8-P[4-4.5/0.01]-L[8-10/0.1]
JBHFMPG10-P[4-6.5/0.01]-L[8-15/0.1]
JBHFMPG12-P[6-8.5/0.01]-L[8-15/0.1]
JBHFMPG15-P[8-10.5/0.01]-L[10-35/0.1]
JBHFMPG18-P[10-12.5/0.01]-L[10-35/0.1]
JBHFMPG20-P[12-13.5/0.01]-L[10-35/0.1]
JBHFMPG22-P[12-13.5/0.01]-L[10-35/0.1]
JBHFMPG25-P[13-15.5/0.01]-L[10-35/0.1]
JBHFMPG26-P[15-16.5/0.01]-L[10-35/0.1]
JBHFMPG30-P[16-20.5/0.01]-L[12-50/0.1]
JBHFMPG35-P[20-25/0.01]-L[12-50/0.1]
JBHFPG8-P[4-4.5/0.01]-L[8-10/0.1]
JBHFPG10-P[4-6.5/0.01]-L[8-15/0.1]
JBHFPG12-P[6-8.5/0.01]-L[8-15/0.1]
JBHFPG15-P[8-10.5/0.01]-L[10-35/0.1]
JBHFPG18-P[10-12.5/0.01]-L[10-35/0.1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Inner Diameter (mm)	Outer Diameter (mm)	Outer Diameter Tolerance	Material	Surface Treatment	O.D. D (mm)	Length L (mm)
-	1	25 Days	10	4 ～ 4.5	8	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	8	8 ～ 10
-	1	25 Days	10	4 ～ 6.5	10	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	10	8 ～ 15
-	1	25 Days	10	6 ～ 8.5	12	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	12	8 ～ 15
-	1	25 Days	10	8 ～ 10.5	15	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	15	10 ～ 35
-	1	25 Days	10	10 ～ 12.5	18	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	18	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	20	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	20	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	22	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	22	10 ～ 35
-	1	25 Days	10	13 ～ 15.5	25	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	25	10 ～ 35
-	1	25 Days	10	15 ～ 16.5	26	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	26	10 ～ 35
-	1	25 Days	10	16 ～ 20.5	30	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	30	12 ～ 50
-	1	25 Days	10	20 ～ 25	35	m6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	35	12 ～ 50
-	1	25 Days	10	4 ～ 4.5	8	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	8	8 ～ 10
-	1	25 Days	10	4 ～ 6.5	10	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	10	8 ～ 15
-	1	25 Days	10	6 ～ 8.5	12	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	12	8 ～ 15
-	1	25 Days	10	8 ～ 10.5	15	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	15	10 ～ 35
-	1	25 Days	10	10 ～ 12.5	18	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	18	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	20	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	20	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	22	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	22	10 ～ 35
-	1	25 Days	10	13 ～ 15.5	25	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	25	10 ～ 35
-	1	25 Days	10	15 ～ 16.5	26	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	26	10 ～ 35
-	1	25 Days	10	16 ～ 20.5	30	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	30	12 ～ 50
-	1	25 Days	10	20 ～ 25	35	p6	[Stainless Steel] EN 1.4037 Equiv.	Not Provided	35	12 ～ 50
-	1	25 Days	10	4 ～ 4.5	8	m6	[Steel] EN 1.2510 Equiv.	Not Provided	8	8 ～ 10
-	1	25 Days	10	4 ～ 6.5	10	m6	[Steel] EN 1.2510 Equiv.	Not Provided	10	8 ～ 15
-	1	25 Days	10	6 ～ 8.5	12	m6	[Steel] EN 1.2510 Equiv.	Not Provided	12	8 ～ 15
-	1	25 Days	10	8 ～ 10.5	15	m6	[Steel] EN 1.2510 Equiv.	Not Provided	15	10 ～ 35
-	1	25 Days	10	10 ～ 12.5	18	m6	[Steel] EN 1.2510 Equiv.	Not Provided	18	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	20	m6	[Steel] EN 1.2510 Equiv.	Not Provided	20	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	22	m6	[Steel] EN 1.2510 Equiv.	Not Provided	22	10 ～ 35
-	1	25 Days	10	13 ～ 15.5	25	m6	[Steel] EN 1.2510 Equiv.	Not Provided	25	10 ～ 35
-	1	25 Days	10	15 ～ 16.5	26	m6	[Steel] EN 1.2510 Equiv.	Not Provided	26	10 ～ 35
-	1	25 Days	10	16 ～ 20.5	30	m6	[Steel] EN 1.2510 Equiv.	Not Provided	30	12 ～ 50
-	1	25 Days	10	20 ～ 25	35	m6	[Steel] EN 1.2510 Equiv.	Not Provided	35	12 ～ 50
-	1	25 Days	10	4 ～ 4.5	8	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	8	8 ～ 10
-	1	25 Days	10	4 ～ 6.5	10	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	10	8 ～ 15
-	1	25 Days	10	6 ～ 8.5	12	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	12	8 ～ 15
-	1	25 Days	10	8 ～ 10.5	15	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	15	10 ～ 35
-	1	25 Days	10	10 ～ 12.5	18	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	18	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	20	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	20	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	22	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	22	10 ～ 35
-	1	25 Days	10	13 ～ 15.5	25	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	25	10 ～ 35
-	1	25 Days	10	15 ～ 16.5	26	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	26	10 ～ 35
-	1	25 Days	10	16 ～ 20.5	30	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	30	12 ～ 50
-	1	25 Days	10	20 ～ 25	35	m6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	35	12 ～ 50
-	1	25 Days	10	4 ～ 4.5	8	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	8	8 ～ 10
-	1	25 Days	10	4 ～ 6.5	10	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	10	8 ～ 15
-	1	25 Days	10	6 ～ 8.5	12	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	12	8 ～ 15
-	1	25 Days	10	8 ～ 10.5	15	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	15	10 ～ 35
-	1	25 Days	10	10 ～ 12.5	18	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	18	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	20	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	20	10 ～ 35
-	1	25 Days	10	12 ～ 13.5	22	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	22	10 ～ 35
-	1	25 Days	10	13 ～ 15.5	25	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	25	10 ～ 35
-	1	25 Days	10	15 ～ 16.5	26	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	26	10 ～ 35
-	1	25 Days	10	16 ～ 20.5	30	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	30	12 ～ 50
-	1	25 Days	10	20 ～ 25	35	p6	[Steel] EN 1.2510 Equiv.	Electroless Nickel Plating	35	12 ～ 50
-	1	25 Days	10	4 ～ 4.5	8	p6	[Steel] EN 1.2510 Equiv.	Not Provided	8	8 ～ 10
-	1	25 Days	10	4 ～ 6.5	10	p6	[Steel] EN 1.2510 Equiv.	Not Provided	10	8 ～ 15
-	1	25 Days	10	6 ～ 8.5	12	p6	[Steel] EN 1.2510 Equiv.	Not Provided	12	8 ～ 15
-	1	25 Days	10	8 ～ 10.5	15	p6	[Steel] EN 1.2510 Equiv.	Not Provided	15	10 ～ 35
-	1	25 Days	10	10 ～ 12.5	18	p6	[Steel] EN 1.2510 Equiv.	Not Provided	18	10 ～ 35

Back to the Category Bushings for Fixtures

Technical Drawing - Flanged Drill Bushes

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Overview of the various designs as PDF

Specification Tables - Flanged Drill Bushes

Part Number		P 0.01mm Increment	L 0.1mm Increment	Thickness (N)	R	H	T	Unit Price
Type	D	P 0.01mm Increment	L 0.1mm Increment	Thickness (N)	R	H	T	JBHFPG JBHFG JBHG	JBHFMPG JBHFMG JBHMG	JBHFCPG JBHFCG
(p6) JBHFPG JBHFMPG JBHFCPG (m6) JBHFG JBHFMG JBHFCG (h6) JBHG JBHMG	8	4.00~4.50	8.0~10.0	1.75~2.50	1.0	12	3
	10	4.00~6.50	8.0~15.0	1.75~3.00	1.0	14	3
	12	6.00~8.50	8.0~15.0	1.75~3.00	2.0	16	4
	15	8.00~10.50	10.0~35.0	2.25~3.50		19
	18	10.00~12.50		2.75~4.00		22
	20	12.00~13.50		3.25~4.00		26	5
	22	12.00~13.50		4.25~5.00		26
	25	13.00~15.50		4.75~6.00		30
	26	15.00~16.50		4.75~5.50		30
	30	16.00~20.50	12.0~50.0	4.75~7.00	3.0	35	6
	35	20.00~25.00	12.0~50.0	5.00~7.50	3.0	40	6
L+T≤Px3.0

Alterations - Flanged Drill Bushes

Products homepage

Basic information

Basic Shape	Shouldered	Inner Diameter Shape	Circular Shape	Fixing Support	Retaining Type

Configure

88Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Inner Diameter(mm)
[4-25/0.01mm Unit(s)]
Clear
Outer Diameter(mm)
8

10

12

15

18

20

22

25

26

30

35
Clear
Outer Diameter Tolerance
p6

m6

h6
Clear
Material
- Steel
  - EN 1.2510 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
Clear
Surface Treatment
- Not Provided
- Electroless Nickel Plating
Clear
O.D. D(mm)
8

10

12

15

18

20

22

25

26

30

35
Clear
Length L(mm)
[8-50/0.1mm Unit(s)]
Clear
Type
- JBHFCG
- JBHFCPG
- JBHFG
- JBHFMG
- JBHFMPG
- JBHFPG
- JBHG
- JBHMG
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

25 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Can you press in a drill bushing?: Answer:
A drill bushing or collar bushing can be pressed in. However, it should be noted that the inner diameter of the drill bushing may become smaller if the tolerance is too tight. For more information, see the Technical Data Sheet available as a PDF. It is recommended to select a non-tight press fit and to additionally secure the bushing with screw locking agents such as Loctite.
Question:
Are there gentle positioning bushings for centring pins?: Answer:
MISUMI offers gentle drill bushings and collar bushings made of brass. These consist of a softer material than drill bushings made of steel. In the case of frequent joining processes, increased wear is thus directed onto the drill bushing and therefore the wear of the centring pin is reduced. However, wear should often be checked for brass bore bushings and attention should be paid to the resulting play.
Question:
What is a drill bushing?: Answer:
A drill bushing is primarily used to guide and centre drill bits. These are often used in drilling templates and drilling gauges and help to precisely enable a repetitive position of the drilling. In addition, a drill bushing of the guide and support of a drill helps and can protect it from breakage. The drill bushings are also often used as a positioning bushing for centring pins. This means that positioning bushings can also be used in a workpiece carrier.
Question:
Can a drill bushing corrode?: Answer:
A drill bushing made of steel can oxidize (rust). If necessary, a stainless steel drill bushing can also be used. MISUMI also offers the drill bushing and positioning bushing made of steel with various surface treatments. These are available in either burnished or nickel-plated and protect against corrosion.
Question:
How can you prevent tilting in a centring bushing?: Answer:
In order to prevent tilting, a positioning bushing with oval bore can be used, as this allows length compensation in one direction. A possible cause of tilting can be a misalignment caused by temperature-related expansion or stress. Alternatively, a sword pin with a conventional drill bushing can be used to prevent tilting.
Question:
Which fit for drill bushings?: Answer:
Which bore tolerance fits depends on the application and the selected external tolerance of the drill bushing. Often, an H7 tolerance for the bore is used for pressing in. For more information about fitting, see Dimensional Tolerances and Fits available as a PDF.
Question:
Does a drill bushing need to be pressed in?: Answer:
It is not mandatory to press in a drill bushing or positioning bushing. A socket drill bushing is assembled and disassembled with a shoulder screw. Another variant is the drill bushing with mounting flange (large collar with through-holes), which is screwed to the flange. MISUMI also provides cylindrical drill bushings and collar bushings with a lateral groove that can be fixed with an adjusting screw or set screw.
Question:
Do you have stainless steel drill bushings?: Answer:
The cylindrical bore bushings and collared bore bushings are available in steel, stainless steel and brass.
These can be selected to the usual dimensions such as DIN 172 and DIN 179. However, MISUMI also offers configurable drill bits the length of which can be individually adjusted to your needs in 0.1 mm increments and the diameter in 0.01 mm increments.

Show more FAQ Close

Complementary Products

[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -
Rough Guide / Standard
MISUMI Shipping Days: 10 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day