Servo couplings / hub clamping, key / 1 disc, 2 discs: CFRP / body: aluminium

Data sheet

Unit еxample related to this product

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Couplings/High Torque Disc/Clamping:Related Image
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Claw Couplings

Tolerances for d1 and d2 are values before slit machining.
The lateral, angular, and axial misalignment values shown are for each occurring individually. When multiple misalignments are occurring simultaneously, the allowable maximum value of each will be reduced to 1/2.
For the selection criteria and alignment procedures, see >> P.1061
Standard BoreKeywayed BoreMaterialSurface TreatmentAccessory
d1 (One Side)d2 (One Side)d1, d2 (Both Sides)Main BodyDiscMain Body
MCKLCMCKLCLKMCKLCRKMCKLCWKAluminum DiecastCarbon FiberElectroless Nickel PlatingHex Socket Head Cap Screw
MCKSC--MCKSCWK

Further specifications can be found under the tab More information.

Composition of a Product Code - Claw Couplings

Part Number-Shaft Bore Dia. d1-Shaft Bore Dia. d2
MCKLC16-5-6
MCKLCWK40-12-15

Alterations - Claw Couplings

Couplings/High Torque Disc/Clamping:Related Image

General Information - Claw Couplings

Shaft coupling - compensation coupling - Oldham coupling - slit coupling - chain coupling - disc coupling - bellow coupling - product assortment

 

Shaft Coupling Selection Details

- Material: aluminum, aluminum alloy, steel, stainless steel, plastic

- Coupling buffer material: polyacetal, polyurethane, nylon, aluminum bronze, carbon fibre reinforced polymer (CFRP)

- Disc material: stainless steel, polyimide, carbon fibre (carbon)

- Fastening: hub clamping, half shell clamping, threaded pin clamping, clamping sleeve, keyway

- Design: slit coupling, disc coupling (servo coupling), Oldham coupling, dog coupling, jaw coupling, bellow coupling, metal bellow coupling, elastomer coupling

- ISO tolerances: H8

- Shaft diameter: 1 to 45 mm

- Outer diameter: 6 to 95 mm

- Length: 8.4 to 100 mm

- Offset: angle offset, radial offset, axial offset

Design Overview

 

Description/Basics

A shaft coupling, also called a compensating coupling, is generally used for the transmission of torque for mechanical engineering. Flexible shaft couplings (non-rigid) can compensate for lateral, axial and angular offsets (misalignment). Therefore, these are common connecting elements between motors and axles/shafts or even ball screws.

There are various types of designs, such as the jaw couplings, disc couplings (servo couplings), slit couplings, bellow couplings, Oldham couplings and many others, which are selected depending on the type of misalignment. You can determine which design is the right one for transmission in your application with the Coupling Selection Method available as a PDF.

When the shaft coupling is professionally installed, the transmission of rotational forces should be slip-free. To do this, the appropriate shaft coupling must be selected depending on the application. Here, it is important to observe the degree of misalignment, the maximum speed of rotation and the permissible torque of the compensation coupling and not to exceed these values during operation. If several misalignments occur at the same time, it is recommended to reduce the maximum value of the specified misalignment by approximately half.

The most commonly used elastomer coupling is the jaw coupling, which consists of a plastic buffer with damping properties. As a result, shocks and vibrations in a drive system can be damped, which protects adjacent components in the transmission of force. Our product range offers you alternative materials for the elastomers. These include among others aluminum bronze and carbon fibre-reinforced plastic.

The different shaft connections on the compensation couplings allow various connection variants for assembly. For this purpose, hub clamping, half shell clamping, slot clamping, threaded pin clamping, chip sleeve and keyways are available.
If a keyway is selected for a MISUMI shaft coupling, it is recommended obtaining the MISUMI machine key, as it is best to combine these.

A shaft coupling can be used for precise positioning. These are often combined together with slide screws or ball screws. A disc clutch (servo coupling) is suitable for this application, since it has a high torsional rigidity.

In addition to the standardized diameter of the shaft bore, MISUMI offers the option LDC and RDC, which allows the drill diameter to be adjusted to the shaft end in 0.1 mm increments.

 

Application Examples - Claw Couplings

Application example: shaft coupling - disc coupling with servo motor - disc coupling with ball screw drive - shaft clutch with servo motor - shaft clutch with ball screw drive

Shaft coupling with servo motor and ball screw
(1) Servo motor, (2) disc coupling (servo coupling), (3) ball screw

Application example: shaft coupling with encoder - shaft coupling with bearing housing - slit coupling with encoder - slit coupling with bearing housing -

Slit coupling with encoder
(1) Bearing with housing, (2) shaft coupling, (3) motor, (4) axles/shafts

Application example - Performance test stand with shaft coupling - Oldham coupling with engine - test stand with Oldham coupling

Engine test stand with Oldham coupling
(1) X-axis positioning stage, (2) performance test station, (3) shaft coupling, (4) brackets, L-shaped

Application example: synchronous pulley with shaft coupling - shaft coupling with motor and gearbox

Shaft coupling with motor and gearbox
(1) Motor, (2) Shaft coupling, (3) Conversion/Reducing gears, (4) Timing pulleys / Idlers

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
MCKLC13-[3,​4,​5]-[3,​4,​5]
MCKLC13-[3,​4,​5]-RDC[3-5/0.1]
MCKLC13-LDC[3-5/0.1]-[3,​4,​5]
MCKLC13-LDC[3-5/0.1]-RDC[3-5/0.1]
MCKLC16-[4,​5,​6]-[4,​5,​6]
MCKLC16-[4,​5,​6]-RDC[4-6/0.1]
MCKLC16-LDC[4-6/0.1]-[4,​5,​6]
MCKLC16-LDC[4-6/0.1]-RDC[4-6/0.1]
MCKLC20-[4,​5,​6,​6.35,​7,​8]-[4,​5,​6,​6.35,​7,​8]
MCKLC20-[4,​5,​6,​6.35,​7,​8]-RDC[4-8/0.1]
MCKLC20-LDC[4-8/0.1]-[4,​5,​6,​6.35,​7,​8]
MCKLC20-LDC[4-8/0.1]-RDC[4-8/0.1]
MCKLCLK16-6-6
MCKLCLK16-6-RDC[4-6/0.1]
MCKLCLK16-LDC[4-6/0.1]-6
MCKLCLK16-LDC[4-6/0.1]-RDC[4-6/0.1]
MCKLCLK20-[6,​6.35,​7,​8]-[6,​6.35,​7,​8]
MCKLCLK20-[6,​6.35,​7,​8]-RDC[6-8/0.1]
MCKLCLK20-LDC[6-8/0.1]-[6,​6.35,​7,​8]
MCKLCLK20-LDC[6-8/0.1]-RDC[6-8/0.1]
MCKLCRK16-[4,​5,​6]-6
MCKLCRK16-[4,​5,​6]-RDC[4-6/0.1]
MCKLCRK16-LDC[4-6/0.1]-6
MCKLCRK16-LDC[4-6/0.1]-RDC[4-6/0.1]
MCKLCRK20-[4,​5,​6,​6.35,​7,​8]-[6,​6.35,​7,​8]
MCKLCRK20-[4,​5,​6,​6.35,​7,​8]-RDC[6-8/0.1]
MCKLCRK20-LDC[6-8/0.1]-[6,​6.35,​7,​8]
MCKLCRK20-LDC[6-8/0.1]-RDC[6-8/0.1]
MCKLCWK16-6-6
MCKLCWK20-[6,​6.35,​7,​8]-[6,​6.35,​7,​8]
MCKLCWK20-[6,​6.35,​7,​8]-RDC[6-8/0.1]
MCKLCWK20-LDC[6-8/0.1]-[6,​6.35,​7,​8]
MCKLCWK20-LDC[6-8/0.1]-RDC[6-8/0.1]
MCKSC13-[3,​4,​5]-[3,​4,​5]
MCKSC13-[3,​4,​5]-RDC[3-5/0.1]
MCKSC13-LDC[3-5/0.1]-[3,​4,​5]
MCKSC13-LDC[3-5/0.1]-RDC[3-5/0.1]
MCKSC16-[4,​5,​6]-[4,​5,​6]
MCKSC16-[4,​5,​6]-RDC[4-6/0.1]
MCKSC16-LDC[4-6/0.1]-[4,​5,​6]
MCKSC16-LDC[4-6/0.1]-RDC[4-6/0.1]
MCKSC20-[4,​5,​6,​6.35,​7,​8]-[4,​5,​6,​6.35,​7,​8]
MCKSC20-[4,​5,​6,​6.35,​7,​8]-RDC[4-8/0.1]
MCKSC20-LDC[4-8/0.1]-[4,​5,​6,​6.35,​7,​8]
MCKSC20-LDC[4-8/0.1]-RDC[4-8/0.1]
MCKSCWK16-6-6
MCKSCWK20-[6,​6.35,​7,​8]-[6,​6.35,​7,​8]
MCKSCWK20-[6,​6.35,​7,​8]-RDC[6-8/0.1]
MCKSCWK20-LDC[6-8/0.1]-[6,​6.35,​7,​8]
MCKSCWK20-LDC[6-8/0.1]-RDC[6-8/0.1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSAllowable Torque Range
(N•m)
Shaft Bore Dia. 1 d1 (or d)
(mm)
Shaft Bore Dia. 2 d2 (or d)
(mm)
O.D. D
(mm)
Overall Length
(mm)
Max. Rotational Speed Range
(r/min)
Allowable Torque
(Nm)
Max. Rotational Speed
(r/min)
Allowable Lateral Misalignment Range
(mm)
Allowable Lateral Misalignment
(mm)
Allowable Angular Misalignment
(deg)
Allowable Axial Misalignment
(mm)
Moment of Inertia
(kg・m2)
Single/Double Shaft Bore Shape Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment
1 7 Days 100.05 to 1.003 ~ 53 ~ 5131910,001 to 78,0000.35120000.02 to 0.20.22.5+0.2/-0.28.0x10-8DoubleStandard Holes--
1 7 Days 100.05 to 1.003 ~ 5-131910,001 to 78,0000.35120000.02 to 0.20.22.5+0.2/-0.28.0x10-8DoubleStandard Holes-3 ~ 5
1 7 Days 100.05 to 1.00-3 ~ 5131910,001 to 78,0000.35120000.02 to 0.20.22.5+0.2/-0.28.0x10-8DoubleStandard Holes3 ~ 5-
1 7 Days 100.05 to 1.00--131910,001 to 78,0000.35120000.02 to 0.20.22.5+0.2/-0.28.0x10-8DoubleStandard Holes3 ~ 53 ~ 5
1 7 Days 100.05 to 1.004 ~ 64 ~ 61623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleStandard Holes--
1 7 Days 100.05 to 1.004 ~ 6-1623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleStandard Holes-4 ~ 6
1 7 Days 100.05 to 1.00-4 ~ 61623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleStandard Holes4 ~ 6-
1 7 Days 100.05 to 1.00--1623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleStandard Holes4 ~ 64 ~ 6
1 7 Days 100.05 to 1.004 ~ 84 ~ 820264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleStandard Holes--
1 7 Days 100.05 to 1.004 ~ 8-20264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleStandard Holes-4 ~ 8
1 7 Days 100.05 to 1.00-4 ~ 820264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleStandard Holes4 ~ 8-
1 7 Days 100.05 to 1.00--20264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleStandard Holes4 ~ 84 ~ 8
1 7 Days 100.05 to 1.00661623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d1 Side--
1 7 Days 100.05 to 1.006-1623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d1 Side-4 ~ 6
1 7 Days 100.05 to 1.00-61623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d1 Side4 ~ 6-
1 7 Days 100.05 to 1.00--1623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d1 Side4 ~ 64 ~ 6
1 7 Days 100.05 to 1.006 ~ 86 ~ 820264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d1 Side--
1 7 Days 100.05 to 1.006 ~ 8-20264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d1 Side-6 ~ 8
1 7 Days 100.05 to 1.00-6 ~ 820264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d1 Side6 ~ 8-
1 7 Days 100.05 to 1.00--20264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d1 Side6 ~ 86 ~ 8
1 7 Days 100.05 to 1.004 ~ 661623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d2 Side--
1 7 Days 100.05 to 1.004 ~ 6-1623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d2 Side-4 ~ 6
1 7 Days 100.05 to 1.00-61623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d2 Side4 ~ 6-
1 7 Days 100.05 to 1.00--1623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d2 Side4 ~ 64 ~ 6
1 7 Days 100.05 to 1.004 ~ 86 ~ 820264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d2 Side--
1 7 Days 100.05 to 1.004 ~ 8-20264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d2 Side-6 ~ 8
1 7 Days 100.05 to 1.00-6 ~ 820264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d2 Side6 ~ 8-
1 7 Days 100.05 to 1.00--20264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d2 Side6 ~ 86 ~ 8
1 7 Days 100.05 to 1.00661623.24,001 to 10,0000.690000.02 to 0.20.22.5+0.3/-0.32.4x10-7DoubleHole with Keyway d1/d2 Side--
1 7 Days 100.05 to 1.006 ~ 86 ~ 820264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d1/d2 Side--
1 7 Days 100.05 to 1.006 ~ 8-20264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d1/d2 Side-6 ~ 8
1 7 Days 100.05 to 1.00-6 ~ 820264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d1/d2 Side6 ~ 8-
1 7 Days 100.05 to 1.00--20264,001 to 10,0000.976000.02 to 0.20.22.5+0.3/-0.37.2x10-7DoubleHole with Keyway d1/d2 Side6 ~ 86 ~ 8
1 7 Days 100.05 to 1.003 ~ 53 ~ 51313.510,001 to 78,0000.35120000.02 to 0.20.051+0.1/-0.17.0x10-81-fachStandard Holes--
1 7 Days 100.05 to 1.003 ~ 5-1313.510,001 to 78,0000.35120000.02 to 0.20.051+0.1/-0.17.0x10-81-fachStandard Holes-3 ~ 5
1 7 Days 100.05 to 1.00-3 ~ 51313.510,001 to 78,0000.35120000.02 to 0.20.051+0.1/-0.17.0x10-81-fachStandard Holes3 ~ 5-
1 7 Days 100.05 to 1.00--1313.510,001 to 78,0000.35120000.02 to 0.20.051+0.1/-0.17.0x10-81-fachStandard Holes3 ~ 53 ~ 5
1 7 Days 100.05 to 1.004 ~ 64 ~ 61616.54,001 to 10,0000.690000.02 to 0.20.051+0.1/-0.12.0x10-71-fachStandard Holes--
1 7 Days 100.05 to 1.004 ~ 6-1616.54,001 to 10,0000.690000.02 to 0.20.051+0.1/-0.12.0x10-71-fachStandard Holes-4 ~ 6
1 7 Days 100.05 to 1.00-4 ~ 61616.54,001 to 10,0000.690000.02 to 0.20.051+0.1/-0.12.0x10-71-fachStandard Holes4 ~ 6-
1 7 Days 100.05 to 1.00--1616.54,001 to 10,0000.690000.02 to 0.20.051+0.1/-0.12.0x10-71-fachStandard Holes4 ~ 64 ~ 6
1 7 Days 100.05 to 1.004 ~ 84 ~ 82018.44,001 to 10,0000.976000.02 to 0.20.051+0.1/-0.16.0x10-71-fachStandard Holes--
1 7 Days 100.05 to 1.004 ~ 8-2018.44,001 to 10,0000.976000.02 to 0.20.051+0.1/-0.16.0x10-71-fachStandard Holes-4 ~ 8
1 7 Days 100.05 to 1.00-4 ~ 82018.44,001 to 10,0000.976000.02 to 0.20.051+0.1/-0.16.0x10-71-fachStandard Holes4 ~ 8-
1 7 Days 100.05 to 1.00--2018.44,001 to 10,0000.976000.02 to 0.20.051+0.1/-0.16.0x10-71-fachStandard Holes4 ~ 84 ~ 8
1 7 Days 100.05 to 1.00661616.54,001 to 10,0000.690000.02 to 0.20.051+0.1/-0.12.0x10-71-fachHole with Keyway d1/d2 Side--
1 7 Days 100.05 to 1.006 ~ 86 ~ 82018.44,001 to 10,0000.976000.02 to 0.20.051+0.1/-0.16.0x10-71-fachHole with Keyway d1/d2 Side--
1 7 Days 100.05 to 1.006 ~ 8-2018.44,001 to 10,0000.976000.02 to 0.20.051+0.1/-0.16.0x10-71-fachHole with Keyway d1/d2 Side-6 ~ 8
1 7 Days 100.05 to 1.00-6 ~ 82018.44,001 to 10,0000.976000.02 to 0.20.051+0.1/-0.16.0x10-71-fachHole with Keyway d1/d2 Side6 ~ 8-
1 7 Days 100.05 to 1.00--2018.44,001 to 10,0000.976000.02 to 0.20.051+0.1/-0.16.0x10-71-fachHole with Keyway d1/d2 Side6 ~ 86 ~ 8

Loading...

  1. 1

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Couplings/High Torque Disc/Clamping:Related Image
Open the technical drawing in the new window

Specification Tables - Claw Couplings

Part Numberd1, d2 Selection (d1≤d2)
Keywayed Bore Type is selectable for diameter 6 or larger
d3LAFClamp ScrewUnit Price
TypeDMTightening Torque (N • m)MCKLCMCKLCLK
MCKLCRK
MCKLCWK
Double Disc Type
MCKLC
MCKLCLK
MCKLCRK
MCKLCWK
13*345               5.5195.54.12.5M20.42 --
16 *456              6.823.2753M2.51   
20 *4566.3578           8.1267.56.53.7   
25  *566.35789.5310         10.430.298.54M31.7   
32      89.5310111214      154112.4106M42.5   
40      89.5310111214151618   19.54715.513.17.8M57   
50           1415161820222425531816.79M612   
 
Part Numberd1, d2 Selection (d1≤d2)
Keywayed Bore Type is selectable for diameter 6 or larger
LAFClamp ScrewUnit Price
TypeDMTightening Torque (N • m)MCKSCMCKSCWK
Single Disc Type
MCKSC
MCKSCWK
13*345               13.55.54.12.5M20.42 -
16 *456              16.5753M2.51  
20 *4566.3578           18.47.56.53.7  
25  *566.35789.5310         21.698.54M31.7  
32      89.5310111214      2912.4106M42.5  
40      89.5310111214151618   3515.513.17.8M57  
50           14151618202224411816.79M612  
When d1 is *3, *4, *5, use with the load torque 50% or less than that shown in the table to prevent slipping.
■Double Disc Type
Part NumberAllowable Torque (N • m)Angular Misalignment (°)Lateral Misalignment (mm)Static Torsional Spring Constant (N • m/rad)Max. Rotational Speed (r/min)Moment of Inertia
(kg • m2)
Allowable Axial Misalignment (mm)Mass (g)
TypeD
MCKLC
MCKLCLK
MCKLCRK
MCKLCWK
130.352.50.280120008.0x10-8±0.25
160.613090002.4x10-7±0.39
200.922076007.2x10-714
252.244060002.2x10-6±0.427
323.896048006.0x10-660
406.80.3190040001.7x10-5±0.5104
5011.0225035004.6x10-5210

■Single Disc Type
Part NumberAllowable Torque (N • m)Angular Misalignment (°)Lateral Misalignment (mm)Static Torsional Spring Constant (N • m/rad)Max. Rotational Speed (r/min)Moment of Inertia
(kg • m2)
Allowable Axial Misalignment (mm)Mass (g)
TypeD
MCKSC
MCKSCWK
130.3510.05100120007.0x10-8±0.14
160.616090002.0x10-77
200.929076006.0x10-711
252.255060001.8x10-6±0.222
323.8120048005.2x10-650
406.80.1220040001.3x10-585
5011.0260035003.6x10-5170
 

Alterations - Claw Couplings

Couplings/High Torque Disc/Clamping:Related Image

Basic information

Series Name Disc Type Allowable Misalignment Angular Misalignment / Eccentricity / Axial Misalignment Application Standard
Features High Torsional Rigidity / High Torque Type / Zero Backlash / Low Moment of Inertia Body Material Aluminum Category Coupling Main Body
Disc Material Carbon Fiber

Frequently Asked Questions (FAQ)

Question:

Can a claw coupling compensate for an angle?

Answer:

As a rule, a claw coupling can compensate for an angular offset. How large this angle may be depends on the respective claw coupling. Here, it is recommended to always refer to the technical information in the data sheet. If there are other misalignments, there is a possibility that the amount of the compensation will be reduced depending on the coupling type. There are notes on this for the shaft couplings.

Question:

Which coupling is suitable for a servo motor?

Answer:

A disc coupling can be used with a servo motor application. These have a good torsion rigidity, which is necessary for applications with alternating direction of rotation. These couplings are often used in positioning applications. Here, it is recommended to assume the peak torque of the servo motor and to use the compensation factor found on the product page as safety. The permissible torque of the shaft coupling should be higher than the determined value.

Question:

What temperature can an elastomeric clutch withstand?

Answer:

The temperatures that a claw coupling or Oldham coupling with elastomer buffer can withstand depend on the material used. The permissible temperature is noted for the respective product. However, when designing the shaft coupling, the temperature correction factor should be taken into account in the calculation. You can find it in the shaft coupling selection procedure as a PDF.

Question:

Which coupling compensates for a high angular offset?

Answer:

A metal bellow coupling can be a possible variant in the case of a high angle offset. This variant of a shaft coupling can compensate an angular offset of up to approx. 2°. This is made possible by the flexible bellow coupling.

Show more FAQ Close

Complementary Products

MISUMI Unit еxample related to this product

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360