Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
D | Circularity M | |
over | or Less | |
1 | 2.5 | 0.006 |
3 | 13 | 0.004 |
13 | 20 | 0.005 |
20 | 40 | 0.006 |
40 | 50 | 0.007 |
D | Straightness K |
2·2.5 | 0.1 |
3·4 | 0.03 |
5 | 0.02 |
6 or more | 0.01 |
Dimension | Dimension Tolerance | |
over | or Less | |
14 | 30 | ±0.2 |
30 | 120 | ±0.3 |
120 | 400 | ±0.5 |
400 | 1000 | ±0.8 |
Type | D Tolerance | [M] Material | [S] Surface Treatment | |
(1) | NSFMR | h9 (Cold-drawn) | EN 1.1191 Equiv. | — |
SFMR | Black Oxide | |||
PSFMR | Electroless Nickel Plating | |||
SSFMR | EN 1.4301 Equiv. | — | ||
(2) | NSFHR | h7 (Ground) | EN 1.1191 Equiv. | — |
SFHR | Black Oxide | |||
PSFHR | Electroless Nickel Plating | |||
SSFHR | EN 1.4301 Equiv. | — | ||
(3) | NSFR | g6 (Ground) | EN 1.1191 Equiv. | — |
SFR | Black Oxide | |||
PSFR | Electroless Nickel Plating | |||
SSFR | EN 1.4301 Equiv. | — | ||
HFR | EN 1.7220 Equiv. [H]Hardness: 30 to 35HRC | Black Oxide | ||
PHFR | Electroless Nickel Plating | |||
AHFR | High Hardness Stainless Steel [H]Hardness: 35HRC or More | — |
Part Number | — | L |
SFMR15 PSFHR20 | — — | 150 300 |
Part Number | L 0.1 mm Increments | ||
Type | Dh9 | ||
NSFMR SFMR PSFMR SSFMR (D13, 17, 18 or 22 is not available for SSFMR.) | 3 | 0 −0.025 | 15.0 to 150.0 |
4 | 0 −0.030 | 15.0 to 200.0 | |
5 | 15.0 to 250.0 | ||
6 | 15.0 to 500.0 | ||
8 | 0 −0.036 | 15.0 to 500.0 | |
10 | 15.0 to 800.0 | ||
12 | 0 −0.043 | 15.0 to 900.0 | |
13 | 15.0 to 900.0 | ||
15 | 15.0 to 1000.0 | ||
16 | 15.0 to 1000.0 | ||
17 | 20.0 to 1000.0 | ||
18 | 20.0 to 1000.0 | ||
20 | 0 −0.052 | 20.0 to 1000.0 | |
22 | 20.0 to 1000.0 | ||
25 | 20.0 to 1000.0 | ||
30 | 20.0 to 1000.0 | ||
35 | 0 −0.062 | 70.0 to 1000.0 | |
40 | 80.0 to 1000.0 | ||
50 | 100.0 to 1000.0 |
Part Number | L 0.1 mm Increments | ||
Type | Dh7 | ||
NSFHR SFHR PSFHR SSFHR | 3 | 0 −0.010 | 15.0 to 150.0 |
4 | 0 −0.012 | 15.0 to 200.0 | |
5 | 15.0 to 250.0 | ||
6 | 15.0 to 500.0 | ||
8 | 0 −0.015 | 15.0 to 500.0 | |
10 | 15.0 to 800.0 | ||
12 | 0 −0.018 | 15.0 to 900.0 | |
15 | 15.0 to 1000.0 | ||
17 | 20.0 to 1000.0 | ||
20 | 0 −0.021 | 20.0 to 1000.0 | |
25 | 20.0 to 1000.0 | ||
30 | 20.0 to 1000.0 | ||
35 | 0 −0.025 | 70.0 to 1000.0 | |
40 | 80.0 to 1000.0 | ||
50 | 100.0 to 1000.0 |
Part Number | L 0.1 mm Increments | ||||
Type | Dg6 | ||||
NSFR SFR PSFR SSFR HFR (D15, 20, 25, 30, 35, 40 or 50 is not available for HFR) PHFR (D15, 20, 25, 30, 35, 40 or 50 is not available for PHFR) AHFR (Only * marked numbers are available.) | 2 | −0.002 −0.008 | 15.0 to 50.0 | ||
2.5 | 15.0 to 50.0 | ||||
* | 3 | 15.0 to 150.0 | |||
* | 4 | −0.004 −0.012 | 15.0 to 200.0 | ||
* | 5 | 15.0 to 250.0 | |||
* | 6 | 15.0 to 500.0 | |||
* | 8 | −0.005 −0.014 | 15.0 to 500.0 | ||
* | 10 | 15.0 to 800.0 | |||
* | 12 | −0.006 −0.017 | 15.0 to 900.0 | ||
13 | 15.0 to 900.0 | ||||
* | 15 | 15.0 to 1000.0 | |||
* | 16 | 15.0 to 1000.0 | |||
17 | 20.0 to 1000.0 | ||||
18 | 20.0 to 1000.0 | ||||
* | 20 | −0.007 −0.020 | 20.0 to 1000.0 | ||
22 | 20.0 to 1000.0 | ||||
* | 25 | 20.0 to 1000.0 | |||
30 | 20.0 to 1000.0 | ||||
35 | −0.009 −0.025 | 70.0 to 1000.0 | |||
40 | 80.0 to 1000.0 | ||||
50 | 100.0 to 1000.0 |
Alterations Code | Alteration Details | Applicable Conditions | Ordering Example | ||||||||||||||||||||||
KC | Keyway at One Location | KC, A = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, [ NG ] Not applicable when Shaft Dia. ≤ ø5 | PSFMR30-250-KC50-A10 | ||||||||||||||||||||||
WKC | Keyways at Two Locations | WKC, C, K, E = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, [ NG ] Not applicable when Shaft Dia. ≤ ø5 | PSFMR30-250-WKC5-C20-K5-E10 | ||||||||||||||||||||||
KZ | Keyway (1 Location (for 4th Location)) | KZ, Z = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, [ ! ] Applicable only when combined with both KC and WKC | PSFMR30-250-KC5-A10-WKC20-C10 -K60-E10-KZ100-Z10 | ||||||||||||||||||||||
FC | Set Screw Flat at One Location | FC, G = 1 mm Increments [ ! ] Not applicable when Shaft Dia. = ø2 or ø2.5 [ ! ] G ≤ 70 | PSFMR30-250-FC10-G3 | ||||||||||||||||||||||
WFC | Set Screw Flats at Two Locations | WFC, J, W, V = 1 mm Increments [ ! ] Not applicable when Shaft Dia. = ø2 or ø2.5 [ ! ] J, V ≤ 70 | PSFMR30-250-WFC10-J15-W10-V20 | ||||||||||||||||||||||
SFC | Set Screw Flat, 2 Set Screw Flats (Angle Specified) | SFC, SG = 1 mm Increments AG = 15° Increments [ ! ] Not applicable when Shaft Dia. = ø2 or ø2.5 [ ! ] SG ≤ 70 | PSFMR30-250-SFC10-SG3-AG120 | ||||||||||||||||||||||
KWC | Set Screw Flat, 2 Set Screw Flats on Both Ends | KWC = 1 mm Increments [ NG ] Not applicable when Shaft Dia. ≤ ø6, when D = 13, 16, 17, 18 or 22 [ NG ] Not applicable when L > 680 | PSFMR30-250-KWC10 | ||||||||||||||||||||||
WC | Set Screw Flat, Chamfering Depth Configurable | WC = 0.1 mm Increments [ NG ] Not applicable when Shaft Dia. ≤ ø6, when D = 13, 16, 17, 18 or 22 [ NG ] Not applicable when L > 680 [ ! ] Only when KWC is specified, WC is available
| PSFMR30-250-KWC10-WC22.0 | ||||||||||||||||||||||
TA·TB | Retaining Ring Groove | TA, TB = 0.1 mm Increments [ ! ]2 ≤ TA·TB ≤ 150 | PSFMR30-250-TA10 | ||||||||||||||||||||||
UC | Slit Cam Groove | UC = 1 mm Increments [ NG ] Not applicable when Shaft Dia. = ø2 or ø2.5 or when D ≥ 13 [ NG ] Not applicable to AHFR | PSFMR10-250-UC10 | ||||||||||||||||||||||
LKC | L Dimension Tolerance Change | L < 500···L±0.05 L ≥ 500···L±0.1 [ NG ] Not applicable when L ≥ 800 | PSFMR30-250-LKC | ||||||||||||||||||||||
SC | Wrench Flats | SC = 1 mm Increments [ NG ] Not applicable when D ≤ 5 | PSFMR30-250-SC10 | ||||||||||||||||||||||
CD | Changes Part D Chamfering | Changes Part D Chamfering Size * Select CD from table [ ! ] Only values provided on the Applicable Dia. Table are applicable
| PSFMR30-250-CD3 |
Keyway Dimensions
| |
Detailed Retaining Ring Groove Dimensions for Rotary Shafts
|
|
|
D | Center Hardness (HRC) |
3 | 35 or More |
4 | 35 or More |
5 | 35 or More |
6 | 35 or More |
8 | 35 or More |
10 | 30 or More |
12 | 30 or More |
15 | 30 or More |
16 | 30 or More |
20 | 25 or More |
25 | 25 or More |
Material | Tensile Strength (Mpa) | Yielding Point (0.2% Proof Stress) (MPa) | Young's Modulus (GPa) | Transverse Modulus (GPa) | Poisson Ratio |
EN 1.1191 Equiv. | 570 or More | 345 or More | 200 or More | 77 or More | 0.3 |
EN 1.4301 Equiv. | 520 or More | 210 or More | 193 or More | 74 or More | 0.3 |
EN 1.7220 Equiv. | 930 or More | 785 or More | 206 or More | 79 or More | 0.3 |
High Hardness Stainless Steel | 1102 | 715 | 199 | 77 | 0.3 |
C | Si | Mn | P | S | Ni | Cr |
0.15-0.25 | ≤ 0.50 | 7.5-9.5 | ≤ 0.05 | ≥ 0.12 | 1.5-3.0 | 13-15 |
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Hardness | Surface Treatment | Material Details | D Tolerance | Shaft Dia. D (mm) | Length L (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 3 | 15 ~ 150 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 4 | 15 ~ 200 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 5 | 15 ~ 250 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 6 | 15 ~ 500 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 8 | 15 ~ 500 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 10 | 15 ~ 800 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 12 | 15 ~ 900 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 15 | 15 ~ 1000 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 16 | 15 ~ 1000 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 20 | 20 ~ 1000 | ||
- | 1 | 6 Days | - | [Stainless Steel] Stainless Steel, austenitic (high hardness: 35 HRC or More) | No Hardened | NA | - | g6 (Ground) | 25 | 20 ~ 1000 | ||
- | 1 | 9 Days | 10 | [Steel] EN 1.7220 Equiv. | No Hardened | [Surface Treatment Provided] Black Oxide | - | g6 (Ground) | 15 | 15 ~ 800 | ||
- | 1 | 9 Days | 10 | [Steel] EN 1.7220 Equiv. | No Hardened | [Surface Treatment Provided] Black Oxide | - | g6 (Ground) | 20 | 30 ~ 800 | ||
- | 1 | 9 Days | 10 | [Steel] EN 1.7220 Equiv. | No Hardened | [Surface Treatment Provided] Black Oxide | - | g6 (Ground) | 25 | 50 ~ 800 | ||
- | 1 | 9 Days | 10 | [Steel] EN 1.7220 Equiv. | No Hardened | [Surface Treatment Provided] Black Oxide | - | g6 (Ground) | 30 | 60 ~ 800 | ||
- | 1 | 9 Days | 10 | [Steel] EN 1.7220 Equiv. | No Hardened | [Surface Treatment Provided] Black Oxide | - | g6 (Ground) | 35 | 70 ~ 800 | ||
- | 1 | 9 Days | 10 | [Steel] EN 1.7220 Equiv. | No Hardened | [Surface Treatment Provided] Black Oxide | - | g6 (Ground) | 40 | 80 ~ 800 | ||
- | 1 | 9 Days | 10 | [Steel] EN 1.7220 Equiv. | No Hardened | [Surface Treatment Provided] Black Oxide | - | g6 (Ground) | 50 | 100 ~ 800 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 3 | 15 ~ 150 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 4 | 15 ~ 200 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 5 | 15 ~ 250 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 6 | 15 ~ 500 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 8 | 15 ~ 500 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 10 | 15 ~ 800 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 12 | 15 ~ 900 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 15 | 15 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 17 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 20 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 25 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 30 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 35 | 70 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 40 | 80 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h7 (Ground) | 50 | 100 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 3 | 15 ~ 150 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 4 | 15 ~ 200 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 5 | 15 ~ 250 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 6 | 15 ~ 500 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 8 | 15 ~ 500 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 10 | 15 ~ 800 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 12 | 15 ~ 900 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 13 | 15 ~ 900 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 15 | 15 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 16 | 15 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 17 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 18 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 20 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 22 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 25 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 30 | 20 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 35 | 70 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 40 | 80 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | h9 (Cold-drawn) | 50 | 100 ~ 1000 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | g6 (Ground) | 2 | 15 ~ 50 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | g6 (Ground) | 2.5 | 15 ~ 50 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | g6 (Ground) | 3 | 15 ~ 150 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | g6 (Ground) | 4 | 15 ~ 200 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | g6 (Ground) | 5 | 15 ~ 250 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | g6 (Ground) | 6 | 15 ~ 500 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | g6 (Ground) | 8 | 15 ~ 500 | ||
- | 1 | 9 Days | - | [Steel] EN 1.1191 Equiv. | No Hardened | NA | EN 1.1191 Equiv. | g6 (Ground) | 10 | 15 ~ 800 |
Loading...
Basic Shape | Straight | Environmentally friendly | RoHS Compliant (10 Substances) | End Shape (Left) | Straight |
---|---|---|---|---|---|
Characteristics/Applications | Not Applicable | End Shape (Right) | Straight | Keyway | Keyway Option (Alteration) |
Cleaning Method | No Cleaning | Wrench Flats | Wrench flats option (alteration) |
Configure
Basic Attributes
Material
Surface Treatment
Material Details
D Tolerance
Shaft Dia. D(mm)
Length L(mm)
Type
Hardness
Filter by CAD data type
Filter by standard shipping days
Optional Attributes