Contour core pins / cylindrical / HSS, tool steel / L 0.01mm / stepped / gas venting / face shape selectable (Part Numbers - CAD Download)
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | DC (Gas release section diameter) (mm) | Extend the flat section SV to the bottom | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | N (Gas release section diameter) (mm) | Q (Tip R chamfering) (mm) | S (Tip tapered width) (mm) | SV (Gas release facet cutting length) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration (mm) | When DC = D | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1B | R | 0.7 ～ 2.99 | - | - | - | - | 14.5 ～ 99.1 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | 0.2 ～ 1.4 | - | 2 ～ 50 | 0.7 ～ 2.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1B | R | 0.7 ～ 2.99 | - | - | - | SVC | 14.5 ～ 99.1 | - | - | 16.5 ～ 100 | 0.3 ～ 10 | 0.2 ～ 1.4 | - | - | 0.7 ～ 2.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1B | R | 0.7 ～ 2.99 | - | - | - | - | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | 0.2 ～ 1.4 | - | 2 ～ 50 | 0.7 ～ 2.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1B | R | 0.7 ～ 2.99 | - | - | - | SVC | - | - | - | 16.5 ～ 100 | 0.3 ～ 10 | 0.2 ～ 1.4 | - | - | 0.7 ～ 2.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | 0.7 ～ 3.49 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.7 | - | 2 ～ 60 | 1 ～ 3.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | 0.7 ～ 3.49 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.7 | - | - | 1 ～ 3.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | 0.7 ～ 3.49 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.7 | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | 0.7 ～ 3.49 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.7 | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | 0.7 ～ 3.49 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.7 | - | 2 ～ 60 | 1 ～ 3.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | 0.7 ～ 3.49 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.7 | - | - | 1 ～ 3.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | 0.7 ～ 3.49 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.7 | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | 0.7 ～ 3.49 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.7 | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | 0.7 ～ 3.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.9 | - | 2 ～ 60 | 1 ～ 3.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | 0.7 ～ 3.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.9 | - | - | 1 ～ 3.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | 0.7 ～ 3.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.9 | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | 0.7 ～ 3.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.9 | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | 0.7 ～ 3.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.9 | - | 2 ～ 60 | 1 ～ 3.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | 0.7 ～ 3.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.9 | - | - | 1 ～ 3.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | 0.7 ～ 3.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.9 | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | 0.7 ～ 3.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 1.9 | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1B | R | 1 ～ 4.49 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.2 | - | 2 ～ 60 | 1 ～ 4.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1B | R | 1 ～ 4.49 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.2 | - | - | 1 ～ 4.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1B | R | 1 ～ 4.49 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.2 | - | 2 ～ 60 | 1 ～ 4.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1B | R | 1 ～ 4.49 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.2 | - | - | 1 ～ 4.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1B | R | 1 ～ 4.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.4 | - | 2 ～ 60 | 1 ～ 4.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1B | R | 1 ～ 4.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.4 | - | - | 1 ～ 4.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1B | R | 1 ～ 4.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.4 | - | 2 ～ 60 | 1 ～ 4.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1B | R | 1 ～ 4.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.4 | - | - | 1 ～ 4.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | 1 ～ 5.49 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.7 | - | 2 ～ 60 | 1.5 ～ 5.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | 1 ～ 5.49 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.7 | - | - | 1.5 ～ 5.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | 1 ～ 5.49 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.7 | - | 2 ～ 60 | - | 1 ～ 1.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | 1 ～ 5.49 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.7 | - | - | - | 1 ～ 1.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | 1 ～ 5.49 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.7 | - | 2 ～ 60 | 1.5 ～ 5.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | 1 ～ 5.49 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.7 | - | - | 1.5 ～ 5.49 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | 1 ～ 5.49 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.7 | - | 2 ～ 60 | - | 1 ～ 1.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | 1 ～ 5.49 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.7 | - | - | - | 1 ～ 1.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | 1.5 ～ 5.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 5.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | 1.5 ～ 5.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | 2 ～ 5.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | 1.5 ～ 5.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | 1.5 ～ 5.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | 1.5 ～ 5.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 5.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | 1.5 ～ 5.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | 2 ～ 5.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | 1.5 ～ 5.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | 1.5 ～ 5.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | 1.5 ～ 6.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 6.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | 1.5 ～ 6.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | 2 ～ 6.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | 1.5 ～ 6.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | 1.5 ～ 6.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | 1.5 ～ 6.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 6.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | 1.5 ～ 6.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | 2 ～ 6.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | 1.5 ～ 6.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | 1.5 ～ 6.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | 1.5 ～ 7.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 7.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | 1.5 ～ 7.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | 2 ～ 7.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | 1.5 ～ 7.99 | - | - | - | - | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | 1.5 ～ 7.99 | - | - | - | SVC | 14.5 ～ 119.1 | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | 1.5 ～ 7.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | 2 ～ 7.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | 1.5 ～ 7.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | 2 ～ 7.99 | - | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | 1.5 ～ 7.99 | - | - | - | - | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | 2 ～ 60 | - | 1.5 ～ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | 1.5 ～ 7.99 | - | - | - | SVC | - | - | - | 16.5 ～ 120 | 0.5 ～ 15 | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 | - |
Loading...
Basic information
| Shape type | One-step gas release | Surface treatment | No | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Step (Step shape of the second step) | No second step |
Configure
Basic Attributes
-
Material
- SKH51
- SKD61
- NAK80
- DH2F
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
L dimension tolerance
- +0.02/0
- 0/-0.1
-
Tip gradient tolerance
- ±0.01
- ±0.015
-
D/P (Shaft diameter)(mm)
-
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
-
A (Step shape diameter)(mm)
-
C (Step type taper width)(mm)
-
CVC (Designation of C dimension in increments of 0.01mm)(mm)
-
DC (Gas release section diameter)(mm)
[6.92-6.999/0.001mm Unit(s)][7.92-7.999/0.001mm Unit(s)][9.92-9.999/0.001mm Unit(s)][12.92-12.999/0.001mm Unit(s)][0.92-0.995/0.005mm Unit(s)][1.42-1.495/0.005mm Unit(s)][1.92-1.995/0.005mm Unit(s)][2.42-2.495/0.005mm Unit(s)][2.92-2.995/0.005mm Unit(s)][3.42-3.495/0.005mm Unit(s)][3.92-3.995/0.005mm Unit(s)][4.42-4.495/0.005mm Unit(s)][4.92-4.995/0.005mm Unit(s)][5.42-5.495/0.005mm Unit(s)][5.92-5.995/0.005mm Unit(s)]
-
Extend the flat section SV to the bottom
- SVC
-
F (Bearing bore length)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
N (Gas release section diameter)(mm)
-
Q (Tip R chamfering)(mm)
-
S (Tip tapered width)(mm)
-
SV (Gas release facet cutting length)(mm)
-
V (Tip diameter)(mm)
-
VC (V dimension alteration(mm)
-
When DC = D
- DCX
-
Type
- GV-CPD-1A
- GV-CPD-1AB
- GV-CPD-1AC
- GV-CPD-1AG
- GV-CPD-1AR
- GV-CPD-1AT
- GV-CPD-1B
- GV-CPD-1BB
- GV-CPD-1BC
- GV-CPD-1BG
- GV-CPD-1BR
- GV-CPD-1BT
- GV-CPD-1C
- GV-CPD-1CB
- GV-CPD-1CC
- GV-CPD-1CG
- GV-CPD-1CR
- GV-CPD-1CT
- GV-CPD-1D
- GV-CPD-1DB
- GV-CPD-1DC
- GV-CPD-1DG
- GV-CPD-1DR
- GV-CPD-1DT
- GV-CPF-1A
- GV-CPF-1AB
- GV-CPF-1AC
- GV-CPF-1AG
- GV-CPF-1AR
- GV-CPF-1AT
- GV-CPF-1B
- GV-CPF-1BB
- GV-CPF-1BC
- GV-CPF-1BG
- GV-CPF-1BR
- GV-CPF-1BT
- GV-CPF-1C
- GV-CPF-1CB
- GV-CPF-1CC
- GV-CPF-1CG
- GV-CPF-1CR
- GV-CPF-1CT
- GV-CPF-1D
- GV-CPF-1DB
- GV-CPF-1DC
- GV-CPF-1DG
- GV-CPF-1DR
- GV-CPF-1DT
- GV-CPG-1A
- GV-CPG-1AB
- GV-CPG-1AC
- GV-CPG-1AG
- GV-CPG-1AR
- GV-CPG-1AT
- GV-CPG-1B
- GV-CPG-1BB
- GV-CPG-1BC
- GV-CPG-1BG
- GV-CPG-1BR
- GV-CPG-1BT
- GV-CPG-1C
- GV-CPG-1CB
- GV-CPG-1CC
- GV-CPG-1CG
- GV-CPG-1CR
- GV-CPG-1CT
- GV-CPG-1D
- GV-CPG-1DB
- GV-CPG-1DC
- GV-CPG-1DG
- GV-CPG-1DR
- GV-CPG-1DT
- GV-CPH-1A
- GV-CPH-1AB
- GV-CPH-1AC
- GV-CPH-1AG
- GV-CPH-1AR
- GV-CPH-1AT
- GV-CPH-1B
- GV-CPH-1BB
- GV-CPH-1BC
- GV-CPH-1BG
- GV-CPH-1BR
- GV-CPH-1BT
- GV-CPH-1C
- GV-CPH-1CB
- GV-CPH-1CC
- GV-CPH-1CG
- GV-CPH-1CR
- GV-CPH-1CT
- GV-CPH-1D
- GV-CPH-1DB
- GV-CPH-1DC
- GV-CPH-1DG
- GV-CPH-1DR
- GV-CPH-1DT
- GV-CPK-1A
- GV-CPK-1AB
- GV-CPK-1AC
- GV-CPK-1AG
- GV-CPK-1AR
- GV-CPK-1AT
- GV-CPK-1B
- GV-CPK-1BB
- GV-CPK-1BC
- GV-CPK-1BG
- GV-CPK-1BR
- GV-CPK-1BT
- GV-CPK-1C
- GV-CPK-1CB
- GV-CPK-1CC
- GV-CPK-1CG
- GV-CPK-1CR
- GV-CPK-1CT
- GV-CPK-1D
- GV-CPK-1DB
- GV-CPK-1DC
- GV-CPK-1DG
- GV-CPK-1DR
- GV-CPK-1DT
- GV-CPN-1A
- GV-CPN-1AB
- GV-CPN-1AC
- GV-CPN-1AG
- GV-CPN-1AR
- GV-CPN-1AT
- GV-CPN-1B
- GV-CPN-1BB
- GV-CPN-1BC
- GV-CPN-1BG
- GV-CPN-1BR
- GV-CPN-1BT
- GV-CPN-1C
- GV-CPN-1CB
- GV-CPN-1CC
- GV-CPN-1CG
- GV-CPN-1CR
- GV-CPN-1CT
- GV-CPN-1D
- GV-CPN-1DB
- GV-CPN-1DC
- GV-CPN-1DG
- GV-CPN-1DR
- GV-CPN-1DT
- GV-CPP-1A
- GV-CPP-1AB
- GV-CPP-1AC
- GV-CPP-1AG
- GV-CPP-1AR
- GV-CPP-1AT
- GV-CPP-1B
- GV-CPP-1BB
- GV-CPP-1BC
- GV-CPP-1BG
- GV-CPP-1BR
- GV-CPP-1BT
- GV-CPP-1C
- GV-CPP-1CB
- GV-CPP-1CC
- GV-CPP-1CG
- GV-CPP-1CR
- GV-CPP-1CT
- GV-CPP-1D
- GV-CPP-1DB
- GV-CPP-1DC
- GV-CPP-1DG
- GV-CPP-1DR
- GV-CPP-1DT
- GV-CPX-1A
- GV-CPX-1AB
- GV-CPX-1AC
- GV-CPX-1AG
- GV-CPX-1AR
- GV-CPX-1AT
- GV-CPX-1B
- GV-CPX-1BB
- GV-CPX-1BC
- GV-CPX-1BG
- GV-CPX-1BR
- GV-CPX-1BT
- GV-CPX-1C
- GV-CPX-1CB
- GV-CPX-1CC
- GV-CPX-1CG
- GV-CPX-1CR
- GV-CPX-1CT
- GV-CPX-1D
- GV-CPX-1DB
- GV-CPX-1DC
- GV-CPX-1DG
- GV-CPX-1DR
- GV-CPX-1DT
-
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.