MISUMI
Shape type | Material | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Surface treatment | Head thickness | D/P (Shaft diameter)(mm) | Tip shape | Gas release shape |
---|---|---|---|---|---|---|---|---|
With tip processing | EN 1.3343 Equiv. | -0.01/-0.02 / 0/-0.005 | +0.02/0 or +0.05/0 | No | 4mm(T4) | 2 ~ 8 | 5A | No |
MISUMI
Ejector pins / head flattened on one side / EN 1.3343 Equiv. / machined face / length Configurable
Shape type | Material | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Surface treatment | Head thickness | D/P (Shaft diameter)(mm) | Tip shape | Gas release shape |
---|---|---|---|---|---|---|---|---|
With tip processing | EN 1.3343 Equiv. | -0.01/-0.02 / 0/-0.005 | +0.05/0 / +0.02/0 or +0.05/0 | No | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 1.5 ~ 12 | 26A / 27A / 28A / 29A / 30A / 31A / 32A / 1A / 2A / 3A / 4A / 5A / 6A / 7A / 8A / 9A / 10A / 11A / 12A / 13A / 14A / 15A / 16A / 17A / 18A / 19A / 20A / 21A / 22A / 23A / 24A / 25A | No |
MISUMI
Shape type | Material | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Surface treatment | Head thickness | D/P (Shaft diameter)(mm) | Tip shape | Gas release shape |
---|---|---|---|---|---|---|---|---|
With tip processing | EN 1.2344 Equiv. | -0.01/-0.02 | +0.02/0 / +0.05/0 / +0.02/0 or +0.05/0 | Nitrided | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 1.5 ~ 12 | 26A / 27A / 28A / 29A / 30A / 31A / 32A / 1A / 2A / 3A / 4A / 5A / 6A / 7A / 8A / 9A / 10A / 11A / 12A / 13A / 14A / 15A / 16A / 17A / 18A / 19A / 20A / 21A / 22A / 23A / 24A / 25A | No |
MISUMI
Shape type | Material | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Surface treatment | Head thickness | D/P (Shaft diameter)(mm) | Tip shape | Gas release shape |
---|---|---|---|---|---|---|---|---|
With tip processing | EN 1.3343 Equiv. | -0.01/-0.02 / 0/-0.005 | +0.05/0 / +0.02/0 or +0.05/0 | No | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 0.5 ~ 11.99 | 26A / 27A / 28A / 29A / 30A / 31A / 32A / 1A / 2A / 3A / 4A / 5A / 6A / 7A / 8A / 9A / 10A / 11A / 12A / 13A / 14A / 15A / 16A / 17A / 18A / 19A / 20A / 21A / 22A / 23A / 24A / 25A | No |
MISUMI
Shape type | Material | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Surface treatment | Head thickness | D/P (Shaft diameter)(mm) | Tip shape | Gas release shape |
---|---|---|---|---|---|---|---|---|
With tip processing | EN 1.2344 Equiv. | -0.01/-0.02 | +0.05/0 / +0.02/0 or +0.05/0 | Nitrided | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 0.5 ~ 11.99 | 26A / 27A / 28A / 29A / 30A / 31A / 32A / 1A / 2A / 3A / 4A / 5A / 6A / 7A / 8A / 9A / 10A / 11A / 12A / 13A / 14A / 15A / 16A / 17A / 18A / 19A / 20A / 21A / 22A / 23A / 24A / 25A | No |
MISUMI
Ejector pins / head flattened on one side / tool steel / machined end / length Configurable
Shape type | Material | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Surface treatment | Head thickness | D/P (Shaft diameter)(mm) | Tip shape | Gas release shape |
---|---|---|---|---|---|---|---|---|
With tip processing | EN 1.2344 Equiv. | -0.01/-0.02 / 0/-0.005 | +0.05/0 / +0.02/0 or +0.05/0 | No | 4mm(T4) | 1.5 ~ 12 | 26A / 27A / 28A / 29A / 30A / 31A / 32A / 1A / 2A / 3A / 4A / 5A / 6A / 7A / 8A / 9A / 10A / 11A / 12A / 13A / 14A / 15A / 16A / 17A / 18A / 19A / 20A / 21A / 22A / 23A / 24A / 25A | No |
MISUMI
Shape type | Material | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Surface treatment | Head thickness | D/P (Shaft diameter)(mm) | Tip shape | Gas release shape |
---|---|---|---|---|---|---|---|---|
With tip processing | EN 1.2344 Equiv. | -0.01/-0.02 / 0/-0.005 | +0.05/0 / +0.02/0 or +0.05/0 | No | 4mm(T4) | 0.5 ~ 11.99 | 26A / 27A / 28A / 29A / 30A / 31A / 32A / 1A / 2A / 3A / 4A / 5A / 6A / 7A / 8A / 9A / 10A / 11A / 12A / 13A / 14A / 15A / 16A / 17A / 18A / 19A / 20A / 21A / 22A / 23A / 24A / 25A | No |