CARMEX Thread Cutters（Coating Type：Nitriding Treatment）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Carbide Solid Mill Thread G (55°)

CARMEX

Threading can be performed for both internal and external threads with a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread, No Finishing Flute 60°

CARMEX

It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.

Starting from^∗ ：	208.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread BSPT

CARMEX

For both internal and external threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Tapered End Mill

CARMEX

[Features]
· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
· Increases the service life of solid carbide type mill threads or mill thread tips.
· Equal and proper load will be applied to the cutting edge of the mill thread cutter.
· By applying taper shape pre-processing, the machining time of the mill thread is shortened

Volume Discount

Starting from^∗ ：	119.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Jet Mini Mill Thread for Aircraft MJ

CARMEX

It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

Starting from^∗ ：	217.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters

CARMEX

For both internal and external threading

[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coating

Starting from^∗ ：	208.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws

CARMEX

Metric thread / for I.D. thread

[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coating

Starting from^∗ ：	212.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Unified Screw (UN)

CARMEX

For internal threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread NPT

CARMEX

For both inner/outer diameter threads.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread NPTF

CARMEX

Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole ISO

CARMEX

Metric thread / for I.D.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mill Thread G (55°) Solid Carbide with Oil Hole

CARMEX

Whitworth screw, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole BSPT

CARMEX

BSPT thread, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole UN

CARMEX

For unified screws and inner diameter screws.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPT

CARMEX

NPT thread, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPS

CARMEX

Internal and external use inch shank.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPSF

CARMEX

Inch shank for both inner and outer diameters.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole PG

CARMEX

For both internal and external diameters.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Starting from^∗ ：	390.01 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole ISO

CARMEX

For metric I.D. thread.

[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.

Starting from^∗ ：	263.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole BSPT

CARMEX

For both internal and external threading.

[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.

Starting from^∗ ：	305.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole BSW

CARMEX

Starting from^∗ ：	263.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

CARMEX

For internally threaded metric screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

CARMEX

For internally threaded unified screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid for Outer Diameter, Mill Thread ISO

CARMEX

Metric thread / for O.D. thread.

[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutes

Starting from^∗ ：	342.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid for Outer Diameter, Mill Thread UN

CARMEX

For unified screws and outer diameter screws.

[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutes

Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mini Mill Thread G55°

CARMEX

For both G (55°) inner and outer diameter thread (MT7).

[Features]
· Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
· Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
· Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
· Because high-speed cutting can be performed, machining time is shortened.
· The blade length is short (3 ridges), so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.
· Enables thread cutting of difficult-to-cut and high hardness materials.

Starting from^∗ ：	211.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Jet Mini Mill Thread for Aircraft UNJ

CARMEX

Starting from^∗ ：	213.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole

CARMEX

With internal coolant hole, up to screw depth D1 x 2.

[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.

Starting from^∗ ：	298.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole

CARMEX

Starting from^∗ ：	304.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hard Cut ISO

CARMEX

[Features]
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.

Starting from^∗ ：	244.68 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hard Cut UN

CARMEX

Starting from^∗ ：	218.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Slim Head Type Hard Cut MTH ISO

CARMEX

[Features]
· For mini mill thread type hard cuts, we have developed an innovative tool capable of threading high hardness materials up to HRC 62 in one pass.
· Shortens machining time because the same tool can be used for thread cutting and chamfering.
· Compatible with relatively large diameters.
· The unique coating technology demonstrates excellent resistance to abrasion and heat.
· Excellent carbide grade which also handles hardened steel.
· Cutting chips are reduced, providing machining stability.
· The cycle time is short, increasing productivity.
· Supports screw depths up to twice the machining thread diameter.

Starting from^∗ ：	266.94 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

CARMEX

For both internal and external threading

[Features]
· Ultrafine particle carbide and new type three-layer PVD coating

Starting from^∗ ：	208.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hard Cut ISO

CARMEX

Now with further improved cutting performance and beautiful surface finishing.

[Features]
· Lineup starting from the very small diameter of M1.4 x 0.3 is available.
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.

Starting from^∗ ：	390.43 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)


Brand	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX
Product Series	Carbide Solid Mill Thread G (55°)	Carbide Solid Mill Thread, No Finishing Flute 60°	Carbide Solid Mill Thread BSPT	Carbide Solid Tapered End Mill	Jet Mini Mill Thread for Aircraft MJ	MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters	MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws	Carbide Solid Mill Thread Unified Screw (UN)	Carbide Solid Mill Thread NPT	Carbide Solid Mill Thread NPTF	Carbide Solid Mill Thread with Oil Hole ISO	Mill Thread G (55°) Solid Carbide with Oil Hole	Carbide Solid Mill Thread with Oil Hole BSPT	Carbide Solid Mill Thread with Oil Hole UN	Carbide Solid Mill Thread with Oil Hole NPT	Carbide Solid Mill Thread with Oil Hole NPS	Carbide Solid Mill Thread with Oil Hole NPSF	Carbide Solid Mill Thread with Oil Hole PG	MTZ Jet Mill Thread with Oil Hole ISO	MTZ Jet Mill Thread with Oil Hole BSPT	MTZ Jet Mill Thread with Oil Hole BSW	Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads	For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw	Carbide Solid for Outer Diameter, Mill Thread ISO	Carbide Solid for Outer Diameter, Mill Thread UN	Mini Mill Thread G55°	Jet Mini Mill Thread for Aircraft UNJ	DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole	DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole	Hard Cut ISO	Hard Cut UN	Slim Head Type Hard Cut MTH ISO	MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters	Hard Cut ISO
Starting from^∗	229.39 € *Unit price with basic configuration	208.53 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	119.87 € *Unit price with basic configuration Volume Discount	217.83 € *Unit price with basic configuration	208.52 € *Unit price with basic configuration	212.85 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	390.01 € *Unit price with basic configuration	263.46 € *Unit price with basic configuration	305.88 € *Unit price with basic configuration	263.46 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	342.45 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	211.31 € *Unit price with basic configuration	213.39 € *Unit price with basic configuration	298.23 € *Unit price with basic configuration	304.42 € *Unit price with basic configuration	244.68 € *Unit price with basic configuration	218.26 € *Unit price with basic configuration	266.94 € *Unit price with basic configuration	208.52 € *Unit price with basic configuration	390.43 € *Unit price with basic configuration
Min. Shipping Days ：	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days
Screw Types	Parallel for Pipes	Meter	Parallel for Pipes	Taper for Pipe	Other	Meter	Meter	Unified	Parallel for Pipes	Parallel for Pipes	Meter	Parallel for Pipes	Parallel for Pipes	Unified	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Other	Meter	Parallel for Pipes	Whitworth	Meter	Unified	Meter	Unified	Whitworth	Other	Meter	Unified	Meter	Unified	Meter	Meter	Meter
Screw size (Nominal)	-	-	-	-	-	-	M1 ～ M3	-	-	-	M4 ～ M24	-	-	-	-	-	-	-	M6 ～ M20	-	-	-	-	-	-	-	-	-	-	-	-	M3 ～ M12	-	-
Pitch (P), Number of Threading(mm)	11 ～ 28	-	-	-	-	-	0.25 ～ 0.5	-	-	-	0.5 ～ 3	-	-	-	-	-	-	-	1 ～ 2.5	-	-	1 ～ 4	-	1 ～ 2	-	-	-	1 ～ 2	-	0.4	-	0.5 ～ 1.75	-	2
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]
Tap Type	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter
Hole type	For blind hole	For blind hole	For blind hole	-	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	-	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment
Overall Length (L)(mm)	58 ～ 105	58 ～ 101	58 ～ 105	58 ～ 84	58 ～ 64	39 ～ 64	39	58 ～ 105	58 ～ 105	58 ～ 105	58 ～ 120	64 ～ 105	64 ～ 105	64 ～ 105	64 ～ 73	63 ～ 76	63 ～ 76	84	58 ～ 101	64 ～ 101	58 ～ 73	73 ～ 160	73 ～ 105	73 ～ 84	73 ～ 84	64 ～ 105	58 ～ 73	64 ～ 84	64	39	39 ～ 84	58 ～ 84	39 ～ 58	84

Filter by:

Narrow search by specifying spec./dim.

Screw Types
- Meter
- Unified
- Whitworth
- Taper for Pipe
- Parallel for Pipes
- Other
Clear

Screw size (Nominal)
NO.0-80UNF

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

NO.10-24UNC

NO.12-28UNF

NO.12-24UNC

S0.2

NO.2-64UNF

NO.2-56UNC

S0.3

NO.3-56UNF

NO.3-48UNC

S0.4

NO.4-48UNF

NO.4-40UNC

S0.5

NO.5-44UNF

NO.5-40UNC

S0.6

NO.6-40UNF

S0.8

NO.8-36UNF

NO.8-32UNC

M1

S1

UNC 1

G1"-3"

G1/2 5/8

G1/4

UNC 1/4

UNF 1/4

1/4-28UNF

1/4-20UNC

G1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M2

UNC 2

UNF 2

M2.2

M2.5

M3

UNC 3

UNF 3

G3/8

M3 - M10

M3 - M12

3.5

M3.5

4

M4

UNC 4

UNF 4

M5

G5/8 3/4

M5 - M12

UNC 5/16

UNF 5/16

6

M6

MF6

UNC 6

UNF 6

7 execution M3 - M12

7.5

M8

MF8

UNC 8

9

M10

MF10

UNC 10

UNF 10

M12

MF12

Mf12

M12 x 1.5

M14

MF14

M16

MF16

Mf16

M16 x 1.5

M18

M20

MF20

Mf20

M20 x 1.5

M22

M24

MF24

Mf25

M25 x 1.5

M27

MF28

Mf32

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Pitch (P), Number of Threading(mm)
0.025

0.05

0.08

0.1

0.125

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

11

11.5

12

13

14

16

18

19

20

24

27

28

32
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Carbide
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Hand Tap
- Thread cutter
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
33

35

36

38

39

40

41

44

45

48

50

51

54

56

57

58

59

60

62

63

64

65

68

69

70

72

73

74

75

76

78

79

80

83

84

85

89

90

92

95

100

101

102

104

105

110

115

120

121

125

140

145

150

160

165

175

200

210
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (0)
- Cost Efficient Products ()
- CARMEX (34)
- WERA (0)
- FEIN (0)
- OSG (0)
- NS TOOL (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- GUHRING (0)
- GEDORE (0)
- SANDVIK (0)
- HAZET (0)
- YAMAWA MFG (0)
- REX TOOLS (0)
Clear