Szűrési feltételek

Mindent töröl

  • Készlet
  • Application
  • Tip angle (θ)
    [60–160/1]
  • Tool Diameter (D)(mm)
  • work material
  • Tool Material Type
  • CAD
  • Chamfer, V-Grooves (Application: Hole Chamfer)

      • V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
        • AKCIÓ eddig: 23.03.2025

        MAKOTOLOY

        V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

        [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer901 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
        Normál ár (ÁFA nélkül):
        93.69 €
        Normál ár (ÁFA nélkül):
        Speciális ár
        Normál feladási dátum:
        Raktári cikk - 1 munkanap
        Egyes tételeket még aznap fel lehet adni
        Konfigurálás
      • Leading Drills, TIN-NC-LDS
        • Volume Discount

        OSG

        Leading Drills, TIN-NC-LDS

        TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer60 ~ 1203 ~ 25General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]Single bladeN/AHigh-speed steelAvailableTiN
        Normál ár (ÁFA nélkül):
        21.10 €
        Normál feladási dátum:
        6 munkanapok
        Konfigurálás
      • Chatterless Chamfer Milling Machine
        • AKCIÓ eddig: 23.03.2025
        • Volume Discount

        FUKUDA

        Chatterless Chamfer Milling Machine

        6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.[Features]· Chamfering.· Drilling machines, milling machines, machining centers.· Horizontal Milling
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer60 ~ 120General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/ACobalt HSSN/ANon-Coated
        Normál ár (ÁFA nélkül):
        42.97 €
        Normál ár (ÁFA nélkül):
        Speciális ár
        Normál feladási dátum:
        Raktári cikk - 1 munkanap
        Egyes tételeket még aznap fel lehet adni
        Konfigurálás
      • Chamfering Drill
        • Volume Discount

        NT TOOL

        Chamfering Drill

        For machining non-viscous materials[Features]· A wide range of chamfering sizes with one unit.· Beautiful cut surfaces with zero chatter.· Easy Positioning
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer9010 ~ 25Aluminum[○] / Copper[○]Single blade / Double-edgedN/AHigh-speed steelN/A
        Normál ár (ÁFA nélkül):
        23.05 €
        Normál feladási dátum:
        6 munkanapok
        Konfigurálás
      • TS coated carbide chamfer, V grooving end mill, 2-flute
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TS coated carbide chamfer, V grooving end mill, 2-flute

        [Features] -Ideal for chamfers and V-grooves-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer60 ~ 1203 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
        Normál ár (ÁFA nélkül):
        71.59 €
        Normál feladási dátum:
        5 munkanapok
        Konfigurálás
      • Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
        • Volume Discount
        • Non-Coated
        • Aluminum
        • 2 Flutes

        MISUMI

        Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

        Capable of everything from positioning to chamfering in a single shot
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A
        Normál ár (ÁFA nélkül):
        40.79 €
        Normál feladási dátum:
        5 munkanapok
        Konfigurálás
      • XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
        • Volume Discount

        MISUMI

        XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

        [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole ChamferGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
        Normál ár (ÁFA nélkül):
        41.90 €
        Normál feladási dátum:
        5 munkanapok
        Konfigurálás
      • XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
        • Volume Discount

        MISUMI

        XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

        [Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
        További részletek
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole ChamferGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
        Normál ár (ÁFA nélkül):
        37.71 €
        Normál feladási dátum:
        5 munkanapok
        Konfigurálás
      • Leading Drills, FX-LDS

          OSG

          Leading Drills, FX-LDS

          90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.
          További részletek
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Hole Chamfer9016 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableTiAlN
          Normál ár (ÁFA nélkül):
          357.80 €
          Normál feladási dátum:
          6 munkanapok
          Konfigurálás
        • Spiral Chamfering Cutter for SV Chamfering Process

            UNION TOOL

            Spiral Chamfering Cutter for SV Chamfering Process

            [Features]· Carbide spiral chamfering cutter· Half Taper Angle of 45°· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.
            További részletek
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Hole Chamfer900.8 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A
            Normál ár (ÁFA nélkül):
            135.77 €
            Normál feladási dátum:
            7 munkanapok
            Konfigurálás
          • Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

              OSG

              Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

              Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.
              További részletek
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Hole Chamfer903 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeAvailablePowder high-speed steelAvailableTiCN
              Normál ár (ÁFA nélkül):
              23.64 €
              Normál feladási dátum:
              6 munkanapok
              Konfigurálás
            • Center reamer
              • Volume Discount

              FUKUDA

              Center reamer

              Reamers for center hole finishing or chamfering. Edges of odd number reduce chatter.
              További részletek
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Hole Chamfer60 ~ 120General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/AHigh-speed steelN/ANon-Coated
              Normál ár (ÁFA nélkül):
              30.94 €
              Normál feladási dátum:
              6 munkanapok
              Konfigurálás
            • CMC MC Chamfering Cutter G2

                ASAHI TOOLS

                CMC MC Chamfering Cutter G2

                Soldering shape, Angle tolerance ±15'.Shape accuracy with straight edge.Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resinSingle-edged blade2 blades.
                További részletek
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Hole Chamfer60 ~ 9010 ~ 60General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Single bladeAvailableCarbideN/ANon-Coated
                Normál ár (ÁFA nélkül):
                113.60 €
                Normál feladási dátum:
                6 munkanapok
                Konfigurálás
              • Umbrella-Type Cutter w/ Handle PCS

                  EIKOSHA

                  Umbrella-Type Cutter w/ Handle PCS

                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Hole Chamfer60 ~ 9015 ~ 100General Steel[○] / Aluminum[○] / Copper[○]High-speed steel / Cobalt HSSN/A
                  Normál ár (ÁFA nélkül):
                  106.30 €
                  Normál feladási dátum:
                  6 munkanapok
                  Konfigurálás
                • V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

                    MAKOTOLOY

                    V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

                    [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.
                    További részletek
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Hole Chamfer601 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
                    Normál ár (ÁFA nélkül):
                    93.69 €
                    Normál feladási dátum:
                    6 munkanapok
                    Konfigurálás
                  • V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

                      MAKOTOLOY

                      V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

                      [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Standard type.
                      További részletek
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Hole Chamfer1201 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
                      Normál ár (ÁFA nélkül):
                      93.69 €
                      Normál feladási dátum:
                      8 munkanapok
                      Konfigurálás
                    • V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

                        MAKOTOLOY

                        V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

                        [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.· Long type.
                        További részletek
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Hole Chamfer1203 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
                        Normál ár (ÁFA nélkül):
                        110.87 €
                        Normál feladási dátum:
                        8 munkanapok
                        Konfigurálás
                      • V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

                          MAKOTOLOY

                          V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

                          [Features]· A small but high quality end mill that can also be used with high precision machining technology.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer600.3 ~ 0.9General Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeCarbideN/A
                          Normál ár (ÁFA nélkül):
                          104.69 €
                          Normál feladási dátum:
                          8 munkanapok
                          Konfigurálás
                        • TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
                          • Volume Discount
                          • TS
                          • General Steel
                          • 2 Flutes

                          MISUMI

                          TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

                          Ideal for the Deep Chamfering of Workpieces
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                          Normál ár (ÁFA nélkül):
                          48.89 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • TS coated carbide chamfering end mill, 2-flute / 15° spiral
                          • Volume Discount
                          • TS
                          • General Steel
                          • 2 Flutes

                          MISUMI

                          TS coated carbide chamfering end mill, 2-flute / 15° spiral

                          [Features] -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                          Normál ár (ÁFA nélkül):
                          42.10 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • TS coated carbide chamfering end mill, 2-flute / short model
                          • Volume Discount
                          • TS
                          • General Steel
                          • 2 Flutes
                          • S (Short)

                          MISUMI

                          TS coated carbide chamfering end mill, 2-flute / short model

                          [Features] -Ideal for chamfering. Can also be used as a deburring tool-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer60 ~ 1203 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                          Normál ár (ÁFA nélkül):
                          38.81 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • TS coated carbide chamfering end mill, 3-flute / short model
                          • Volume Discount
                          • TS
                          • General Steel
                          • 3 Flutes
                          • S (Short)

                          MISUMI

                          TS coated carbide chamfering end mill, 3-flute / short model

                          [Features] -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).-Peripheral grooves allow bevel, contour and spiral cutting-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type-With helix angle on peripheral flutes-Can also be used as a deburring tool-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer903 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableTS
                          Normál ár (ÁFA nélkül):
                          46.59 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
                          • Volume Discount
                          • TS
                          • SUS
                          • 2 Flutes

                          MISUMI

                          TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

                          The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer903 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableTS
                          Normál ár (ÁFA nélkül):
                          74.67 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
                          • Volume Discount
                          • Non-Coated
                          • Aluminum
                          • 2 Flutes

                          MISUMI

                          Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

                          The sharp helix blade achieves the clean machined surface with less burr
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer903 ~ 12Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Single bladeN/ACarbideN/A
                          Normál ár (ÁFA nélkül):
                          72.54 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
                          • Volume Discount
                          • TiCN
                          • 2 Flutes
                          • S (Short)

                          MISUMI

                          TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

                          The chamfer angle can be selected from 60, 90 and 120°according to the machining style
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer60 ~ 12010 ~ 25General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailablePowder high-speed steelAvailable
                          Normál ár (ÁFA nélkül):
                          57.90 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • High-Speed Steel Chamfering End Mill, 2-Flute / Short
                          • Non-Coated
                          • 2 Flutes
                          • S (Short)

                          MISUMI

                          High-Speed Steel Chamfering End Mill, 2-Flute / Short

                          Chamfering end mill with the angle that can be freely selected in 1° increments
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole Chamfer60 ~ 16010 ~ 25General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCobalt HSSAvailable / N/ATiCN
                          Normál feladási dátum:
                          7 munkanapok
                          Konfigurálás
                        • XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
                          • Volume Discount

                          MISUMI

                          XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

                          [Features]・Machining from positioning to chamfering with a single tool.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole ChamferGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
                          Normál ár (ÁFA nélkül):
                          42.61 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • XAL Series Carbide Chamfer End Mill 2-Flute
                          • Volume Discount

                          MISUMI

                          XAL Series Carbide Chamfer End Mill 2-Flute

                          [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole ChamferGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/ACarbideAvailableAlCrN
                          Normál ár (ÁFA nélkül):
                          32.62 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
                          • Volume Discount

                          MISUMI

                          XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

                          [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole ChamferGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeAvailableCarbideAvailableAlCrN
                          Normál ár (ÁFA nélkül):
                          43.97 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
                          • Volume Discount

                          MISUMI

                          XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

                          [Features]・The popular high hardness steel chamfer end mill is even more affordable.・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)・High-efficiency machining is possible by adopting a 6-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.
                          További részletek
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Hole ChamferGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]Single bladeN/ACarbideAvailableTS
                          Normál ár (ÁFA nélkül):
                          42.86 €
                          Normál feladási dátum:
                          5 munkanapok
                          Konfigurálás
                        • Leading Drills, VP-LDS

                            OSG

                            Leading Drills, VP-LDS

                            V coating enables longer lasting life than TIN-NC-LDS
                            További részletek
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Hole Chamfer903 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]Single bladeN/APowder high-speed steelAvailableTiCN
                            Normál ár (ÁFA nélkül):
                            17.24 €
                            Normál feladási dátum:
                            6 munkanapok
                            Konfigurálás
                          • Leading Drills, NC-LDS
                            • Volume Discount

                            OSG

                            Leading Drills, NC-LDS

                            Available tip angles are 90° (45° chamfer), 120°, and 130° (EX GOLD drill centering for slope / curved surfaces).
                            További részletek
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Hole Chamfer90 ~ 1303 ~ 25General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Single bladeN/AHigh-speed steelN/ANon-Coated
                            Normál ár (ÁFA nélkül):
                            12.20 €
                            Normál feladási dátum:
                            6 munkanapok
                            Konfigurálás
                          • Leading Drills, FX-LS-LDS

                              OSG

                              Leading Drills, FX-LS-LDS

                              90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.
                              További részletek
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Hole Chamfer9016 ~ 25General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Single bladeN/ACarbideAvailableTiAlN
                              Normál ár (ÁFA nélkül):
                              295.75 €
                              Normál feladási dátum:
                              6 munkanapok
                              Konfigurálás
                            • 2-Flute Spiral Chamfering Cutter FX-SCC
                              • Volume Discount

                              OSG

                              2-Flute Spiral Chamfering Cutter FX-SCC

                              By adopting of sharp high helix, clean working surface with less burr can be obtained.
                              További részletek
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Hole Chamfer900.8 ~ 1Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]Single bladeN/ACarbideAvailableTiAlN
                              Normál ár (ÁFA nélkül):
                              88.29 €
                              Normál feladási dátum:
                              6 munkanapok
                              Konfigurálás
                            • 2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC
                              • Volume Discount

                              OSG

                              2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC

                              By adopting of sharp high helix, clean working surface with less burr can be obtained.
                              További részletek
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Hole Chamfer900.8 ~ 1Aluminum[◎] / Copper[◎] / Resin[○]Single bladeN/ACarbideN/ANon-Coated
                              Normál ár (ÁFA nélkül):
                              81.19 €
                              Normál feladási dátum:
                              6 munkanapok
                              Konfigurálás
                            • 2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

                                OSG

                                2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

                                Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer900.8 ~ 1Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]Single bladeN/ACarbideAvailableTiAlN
                                Normál ár (ÁFA nélkül):
                                84.50 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • 2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC
                                • Volume Discount

                                OSG

                                2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC

                                Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer900.8 ~ 1Aluminum[◎] / Copper[◎] / Resin[○]Single bladeN/ACarbideN/ANon-Coated
                                Normál ár (ÁFA nélkül):
                                87.63 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • 3-Flute, Chamfering Cutter (Negative Type) HSCT-N
                                • Volume Discount

                                OSG

                                3-Flute, Chamfering Cutter (Negative Type) HSCT-N

                                End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer901 ~ 2General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]Single bladeN/ACarbideN/ANon-Coated
                                Normál ár (ÁFA nélkül):
                                73.17 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • 3-Flute, Chamfering Cutter (Positive Type) HSCT-P
                                • Volume Discount

                                OSG

                                3-Flute, Chamfering Cutter (Positive Type) HSCT-P

                                End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer901 ~ 2General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]Single bladeN/ACarbideN/ANon-Coated
                                Normál ár (ÁFA nélkül):
                                73.51 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • 3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N
                                • Volume Discount

                                OSG

                                3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

                                End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer901 ~ 2General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]Single bladeN/ACarbideN/ANon-Coated
                                Normál ár (ÁFA nélkül):
                                78.36 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • 3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P
                                • Volume Discount

                                OSG

                                3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

                                Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer901 ~ 2General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]Single bladeN/ACarbideN/ANon-Coated
                                Normál ár (ÁFA nélkül):
                                78.36 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters
                                • Volume Discount

                                OSG

                                High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters

                                By adopting of sharp high helix, clean working surface with less burr can be obtained.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole ChamferGeneral Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Single bladeN/APowder high-speed steelAvailableTiCN
                                Normál ár (ÁFA nélkül):
                                44.76 €
                                Normál feladási dátum:
                                6 munkanapok
                                Konfigurálás
                              • Center Chamfer Mill
                                • AKCIÓ eddig: 23.03.2025
                                • Volume Discount

                                FUKUDA

                                Center Chamfer Mill

                                A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.
                                További részletek
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer60 ~ 1204 ~ 40General Steel[○] / Cast Iron[○] / Resin[○]Single bladeAvailableCobalt HSSN/ANon-Coated
                                Normál ár (ÁFA nélkül):
                                58.35 €
                                Normál ár (ÁFA nélkül):
                                Speciális ár
                                Normál feladási dátum:
                                Raktári cikk - 1 munkanap
                                Egyes tételeket még aznap fel lehet adni
                                Konfigurálás
                              • Center Reamer (Taper Shank)

                                  FUKUDA

                                  Center Reamer (Taper Shank)

                                  A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.
                                  További részletek
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Hole Chamfer60 ~ 90General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/AHigh-speed steelN/ANon-Coated
                                  Normál ár (ÁFA nélkül):
                                  249.16 €
                                  Normál feladási dátum:
                                  6 munkanapok
                                  Konfigurálás
                                • GCCC for Carbide Center Chamfering

                                    SANKO MFG

                                    GCCC for Carbide Center Chamfering

                                    [Features]· Melding the design concepts of endmills and drills, it is available for a wide range of applications.· Double angle adopted for the chamfer part.· Provides a clean finish with fewer burrs.
                                    További részletek
                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Hole Chamfer10General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]AvailableCarbideN/ANon-Coated
                                    Normál ár (ÁFA nélkül):
                                    146.60 €
                                    Normál feladási dátum:
                                    6 munkanapok
                                    Konfigurálás