Ball Indenter for Test, Steel Ball

Mitutoyo indenters for Rockwell hardness test. As the interface between machine and material, the indenter must be of immaculate quality. Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB. Constant development at our calibration partners secures an unmatched quality level.
Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18. A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
11AAD733
11AAD734

Part Number	Related to	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Ball Diameter (inch)	Ball Diameter (mm)	Collar Diameter (mm)
	Data sheet	219.74 €	1		5 Days	1/4	6.35	12
	Data sheet	219.74 €	1		5 Days	1/2	12.7	18

Basic information

Product Type	Hardness Check	Calibration	without	Chamfer Angle(degree)	20
Material	steel	Method	Rockwell	Product Line	HR-100, HR-200, HR-300, HR-400, HR-500, HR-600, AR-10, AR-20ARK
Shaft Length(mm)	12	Shaft Diameter(mm)	6.3	Total Length(mm)	28
Type	Ball indenter	Usable Length(mm)	16