Szűrési feltételek
  • Blade thickness(mm)
  • JAN code
  • Type
  • Becsült szállítási napok
    • Minden
    • 6 munkanapok belül
    • 8 munkanapok belül

GT Diamond Cutter

GT Diamond Cutter
  • NDC-105S
  • NDC-105W

Cikkszám:

Befejezetlen: 2 javaslat található.
    Mennyiség:

    Cikkszámlista

    Elemek száma

    Wheel Type

    Blade thickness

    (mm)

    JAN code

    Minimális rendelési mennyiség
    Segment Type
    1.8
    4904781386376
    2 darab
    Wave Type
    2
    4904781386383
    2 darab
    Egységár (HÉA nélkül)(egységár adóval)
    Normál feladási dátum
    12.07 €
    ( 14.36 € )
    8 munkanapok
    20.07 €
    ( 23.88 € )
    6 munkanapok

    Részletes információk

    Alapvető információk

    [Features]
    Lineup: A segmented type designed with an emphasis on speed (NDC-105S), A wave type designed with an emphasis on the cut section (NDC-105W); Outer diameter: 105 mm; Hole diameter: 20 mm (with 15-mm washer); Maximum rotational speed: 14,500 min-1
    [Applications]
    · Concrete, bricks, block, mortar, etc.

    Vigyázat

    • Match the arrow with the rotational direction of the power tool. Check that there are no bends, cracks or chips on the product. Check that there is no rattling or wobbling after attaching the product. Check that there are no abnormal sounds or vibrations by turning the disk without any load after attaching. If you notice any abnormal sounds or vibrations during work, stop work immediately. Cannot be used for metals, woodwork or for polishing flat surfaces. Use at or below the maximum rotational speed of 14,500 min-1. If there is clogging or the sharpness has deteriorated, sharpen the product using soft materials such as a GC-type grind stone or brick.