Universal joint shafts with friction bearing (Part Numbers - CAD Download)

Volume Discount

Universal joint shafts with friction bearing GN 808.2 not only join the offset between two shafts, but also enable the alignment of lengths, which depending on the overall length l1 enables the corresponding extraction length l2. The power transmission is achieved by two universal joints DIN 808 (type EG) a splined shaft and a sliding sleeve.
It is important to check the accuracy when connec-ting the splined shaft to the sliding sleeve:
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Products homepage

Data to be displayed: 30; 45; 60

Part Number
808.2-25-K12-160-30
808.2-25-K12-180-45
808.2-25-K12-200-70
808.2-25-K12-250-105

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Bore d2 (Ø)	Outside diameter d1 (Ø)	l1 - l2
296.32 €	1	Available	7 Days	12	25	160-30
296.32 €	1	Available	7 Days	12	25	-
306.98 €	1	Available	7 Days	12	25	-
306.98 €	1	Available	7 Days	12	25	-

Basic information

Bore code	K, with keyway

Configure

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

l1 - l2
- 140-30
- 160-30
- 170-30
- 190-30
- 230-50
- 250-50
- 270-50
- 295-50
- 330-50
Clear
Type
- 808.2
Clear
Bore d2(Ø)
10

12

14

16

18

20

22

25

30
Clear
Outside diameter d1(Ø)
22

25

28

32

36

42

45

50

58
Clear
Filter by CAD data type
- 2D
- 3D
Clear