Cikkszám:
javaslat található.Cikkszám |
---|
Egységár (HÉA nélkül)(egységár adóval) | Normál feladási dátum |
---|
90.78 € ( 108.03 € ) | 5 munkanapok |
98.57 € ( 117.30 € ) | 5 munkanapok |
94.51 € ( 112.47 € ) | 5 munkanapok |
123.32 € ( 146.75 € ) | 5 munkanapok |
142.63 € ( 169.73 € ) | 5 munkanapok |
110.11 € ( 131.03 € ) | 5 munkanapok |
125.77 € ( 149.67 € ) | 5 munkanapok |
93.35 € ( 111.09 € ) | 5 munkanapok |
118.74 € ( 141.30 € ) | 5 munkanapok |
88.68 € ( 105.53 € ) | 5 munkanapok |
93.17 € ( 110.87 € ) | 5 munkanapok |
112.70 € ( 134.11 € ) | 5 munkanapok |
158.85 € ( 189.03 € ) | 5 munkanapok |
145.19 € ( 172.78 € ) | 5 munkanapok |
128.49 € ( 152.90 € ) | 5 munkanapok |
142.06 € ( 169.05 € ) | 5 munkanapok |
142.06 € ( 169.05 € ) | 5 munkanapok |
426.44 € ( 507.46 € ) | 5 munkanapok |
Long neck type with interference prevention can be selected from a number of effective lengths
Model Number | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure | |||
Outer Diameter D |
Radius R |
Effective Length ℓ1 |
||||||
TSC-CRLN-HFEM4S | 4 | 1 | 28 | 8 | 3.8 | 70 | 4 | 1 |
4 | 1 | 35 | 6 | 3.8 | 80 | 6 | 1 | |
6 | 1.5 | 30 | 12 | 5.8 | 80 | 6 | 2 | |
6 | 1.5 | 42 | 12 | 5.8 | 90 | 6 | 2 | |
6 | 1.5 | 54 | 12 | 5.8 | 100 | 6 | 2 | |
6 | 1.5 | 70 | 9 | 5.7 | 120 | 6 | 2 | |
8 | 2 | 40 | 16 | 7.7 | 85 | 8 | 2 | |
8 | 2 | 56 | 16 | 7.7 | 100 | 8 | 2 | |
8 | 2 | 72 | 16 | 7.7 | 120 | 8 | 2 | |
8 | 2 | 85 | 12 | 7.6 | 135 | 8 | 2 | |
10 | 2 | 50 | 20 | 9.7 | 100 | 10 | 2 | |
10 | 2 | 70 | 20 | 9.7 | 120 | 10 | 2 | |
10 | 2 | 90 | 20 | 9.7 | 140 | 10 | 2 | |
10 | 2 | 100 | 15 | 9.5 | 150 | 10 | 2 | |
12 | 2 | 60 | 24 | 11.7 | 110 | 12 | 2 | |
12 | 2 | 84 | 24 | 11.7 | 135 | 12 | 2 | |
12 | 2 | 108 | 18 | 11.5 | 160 | 12 | 2 | |
16 | 3 | 120 | 24 | 15.5 | 180 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
● It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
● The combination of a radius with negative flutes, appropriate core thickness and 45° twist yields an improved high-capacity machining thanks to the high rigidity, sharpness and high feed rate.
● The long neck model is ideal for machining deep grooves, such as deep pockets.
● Universal model capable of everything from engraving through to side-surface, curving, coarse and medium finishing.