Szűrési feltételek
  • R Size(mm)
  • Flute Length (ℓ)(mm)
  • Overall Length (L)(mm)
  • R Precision(μm)
  • Becsült szállítási napok
    • Minden
    • 5 munkanapok belül

TSC series carbide ball end mill (R accuracy ±3μm)

TSC series carbide ball end mill (R accuracy ±3μm)

Cikkszám:

Befejezetlen: 3 javaslat található.
    Mennyiség:

    Vázlatrajz

    TSC series carbide ball end mill (R accuracy ±3μm):Related Image

    Cikkszámlista

    Elemek száma

    R Size

    (mm)

    Flute Length (ℓ)

    (mm)

    Overall Length (L)

    (mm)

    R Precision

    (μm)

    Outer Diameter D

    (mm)

    Figure

    Length Under Neck (θ)

    (Degree)

    Minimális rendelési mennyiség
    1.5
    4.5
    60
    ±0.003
    3
    1
    10°
    1 darab
    2
    6
    70
    ±0.003
    4
    1
    10°
    1 darab
    2.5
    7.5
    80
    ±0.003
    5
    1
    10°
    1 darab
    Egységár (HÉA nélkül)(egységár adóval)
    Normál feladási dátum
    46.74 €
    ( 55.62 € )
    5 munkanapok
    58.04 €
    ( 69.07 € )
    5 munkanapok
    96.37 €
    ( 114.68 € )
    5 munkanapok

    Részletes információk

    Alapvető információk

    [Features]
    -Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
    -Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.

    Specifikációk és ár

    Specifications

    TSC series carbide ball end mill (R accuracy ±3μm):Related Image

      Flute Length
    Outer Diameter
    D
    Overall Length
    L
    Shank Diameter
    d
    Figure
    Tip
    R
    0.2 0.6 0.4 50 6 1
    0.3 0.9 0.6 50 6 1
    0.5 1.5 1 50 6 1
    1 3 2 50 6 1
    1.5 4.5 3 60 6 1
    2 6 4 70 6 1
    2.5 7.5 5 80 6 1
    3 9 6 90 6 2


    For Cutting Conditions, Refer to >>Click here.

    Jellemzők és használati példák

    More Information


    The R tolerance range within 6 μm (our measured ratio) / shank diameter, tolerance h5 standard, has been adopted. The high-quality tools with a minimal quality variation are suitable for high-precision 3-dimensional mold machining.
    The seamless shape (blade mounted in one step from the peripheral blade through to the rounded center) yields a flat and smooth blade runout surface.
    The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness.
    [ ! ] As this is a highly accurate product, if Misumi Q-Value re-grinding is not conducted, then the level of precision may not be reproducible.

    TSC series carbide ball end mill (R accuracy ±3μm):Related Image