TSC series carbide ball end mill (R accuracy ±3μm)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.
- TS
- General Steel
- 2 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| TSC-HP-BEM2S1.5 |
| TSC-HP-BEM2S2 |
| TSC-HP-BEM2S2.5 |
| TSC-HP-BEM2S3 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | R Precision (μm) | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
46.74 € | 1 | Available | 5 Days | 1.5 | 4.5 | 60 | ±0.003 | 3 | 1 | 10° | |
58.04 € | 1 | Available | 5 Days | 2 | 6 | 70 | ±0.003 | 4 | 1 | 10° | |
96.37 € | 1 | Available | 5 Days | 2.5 | 7.5 | 80 | ±0.003 | 5 | 1 | 10° | |
63.40 € | 1 | Available | 5 Days | 3 | 9 | 90 | -0.005 ~ +0.001 | 6 | 2 | - |
Loading...
Specifications
| Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Shank Diameter d |
Figure | |
| Tip R |
|||||
| 0.2 | 0.6 | 0.4 | 50 | 6 | 1 |
| 0.3 | 0.9 | 0.6 | 50 | 6 | 1 |
| 0.5 | 1.5 | 1 | 50 | 6 | 1 |
| 1 | 3 | 2 | 50 | 6 | 1 |
| 1.5 | 4.5 | 3 | 60 | 6 | 1 |
| 2 | 6 | 4 | 70 | 6 | 1 |
| 2.5 | 7.5 | 5 | 80 | 6 | 1 |
| 3 | 9 | 6 | 90 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● The R tolerance range within 6 μm (our measured ratio) / shank diameter, tolerance h5 standard, has been adopted. The high-quality tools with a minimal quality variation are suitable for high-precision 3-dimensional mold machining.
● The seamless shape (blade mounted in one step from the peripheral blade through to the rounded center) yields a flat and smooth blade runout surface.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness.
[ ! ] As this is a highly accurate product, if Misumi Q-Value re-grinding is not conducted, then the level of precision may not be reproducible.
Basic information
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum / Copper | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Shank Diameter (d)(mm) | 6 | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove |
| Inventory Classification | Stocked Product | Torsion Availability | Included |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.