TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Due to the unique shape of the chip groove, groove cutting can be performed with a depth of cut comparable to that of a 2-groove.
-The application of a rounded blade at the rear end of the groove suppresses machining streaks that occur during multi-step machining of the side face. (Product in Fig. 3 only)
-The 45° helix angle makes it ideal for high-speed machining compared to the general 30° helix angle
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
- TS
- General Steel
- 4 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Figure | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
61.53 € | 1 | Available | 5 Days | 2 | 3.5 | 6 | 80 | 30 | With Lead | 1 | 1.9 | |
96.16 € | 1 | Available | 5 Days | 2.5 | 4.5 | 6 | 80 | 30 | With Lead | 1 | 2.4 | |
70.93 € | 1 | Available | 5 Days | 3 | 5 | 6 | 80 | 30 | With Lead | 1 | 2.9 | |
78.17 € | 1 | Available | 5 Days | 4 | 6 | 6 | 80 | 35 | With Lead | 1 | 3.8 | |
93.72 € | 1 | Available | 5 Days | 5 | 8 | 6 | 100 | 50 | With Lead | 1 | 4.8 | |
102.98 € | 1 | Available | 5 Days | 6 | 9 | 6 | 120 | 70 | With Lead | 2 | 5.7 | |
91.78 € | 1 | Available | 5 Days | 7 | 12 | 6 | 135 | - | With Lead | 3 | - | |
127.62 € | 1 | Available | 5 Days | 8 | 12 | 8 | 135 | 85 | With Lead | 2 | 7.6 | |
163.21 € | 1 | Available | 5 Days | 8 | 12 | 6 | 135 | - | With Lead | 3 | - | |
160.97 € | 1 | Available | 5 Days | 9 | 13 | 8 | 135 | - | With Lead | 3 | - | |
130.37 € | 1 | Available | 5 Days | 10 | 15 | 10 | 150 | 100 | With Lead | 2 | 9.5 | |
156.84 € | 1 | Available | 5 Days | 10 | 15 | 8 | 150 | - | With Lead | 3 | - | |
138.51 € | 1 | Available | 5 Days | 11 | 18 | 10 | 160 | - | With Lead | 3 | - | |
99.65 € | 1 | Available | 5 Days | 12 | 18 | 12 | 160 | 108 | With Lead | 2 | 11.5 | |
115.04 € | 1 | Available | 5 Days | 12 | 18 | 10 | 160 | - | With Lead | 3 | - | |
137.85 € | 1 | Available | 5 Days | 13 | 20 | 12 | 160 | - | With Lead | 3 | - | |
183.74 € | 1 | Available | 5 Days | 16 | 24 | 16 | 180 | 120 | With Lead | 2 | 15.5 | |
327.78 € | 1 | Available | 5 Days | 17 | 25 | 16 | 180 | - | With Lead | 3 | - | |
242.26 € | 1 | Available | 5 Days | 18 | 26 | 16 | 180 | - | With Lead | 3 | - | |
286.39 € | 1 | Available | 5 Days | 20 | 30 | 20 | 200 | 140 | With Lead | 2 | 19.5 | |
354.60 € | 1 | Available | 5 Days | 22 | 30 | 20 | 200 | - | With Lead | 3 | - |
Loading...
Specifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Figure | ||
| Outer Diameter D |
Shank Diameter d |
|||||||
| TSC-LS-HEM4S (Standard) TSC-LS-HPEM4S (Sharp Edge) |
2 | — | 6 | 3.5 |
1.9 |
30 |
80 | 1 |
| 2.5 | — | 6 | 4.5 |
2.4 |
30 |
80 | 1 | |
| 3 | — | 6 | 5 |
2.9 |
30 |
80 | 1 | |
| 4 | — | 6 | 6 |
3.8 |
35 |
80 | 1 | |
| 5 | — | 6 | 8 |
4.8 |
50 |
100 | 1 | |
| 6 | — | 6 | 9 |
5.7 |
70 |
120 | 2 | |
| 7 | — | 6 | 12 | — | — | 135 | 3 | |
| 8 |
6 |
6 | 12 | — | — | 135 | 3 | |
| 8 | — | 8 | 12 |
7.6 |
85 |
135 | 2 | |
| 9 | — | 8 | 13 | — | — | 135 | 3 | |
| 10 |
8 |
8 | 15 | — | — | 150 | 3 | |
| 10 | — | 10 | 15 |
9.5 |
100 |
150 | 2 | |
| 11 | — | 10 | 18 | — | — | 160 | 3 | |
| 12 |
10 |
10 | 18 | — | — | 160 | 3 | |
| 12 | — | 12 | 18 |
11.5 |
108 |
160 | 2 | |
| 13 | — | 12 | 20 | — | — | 160 | 3 | |
| 16 | — | 16 | 24 |
15.5 |
120 |
180 | 2 | |
| 17 | — | 16 | 25 | — | — | 180 | 3 | |
| 18 | — | 16 | 26 | — | — | 180 | 3 | |
| 20 | — | 20 | 30 |
19.5 |
140 |
200 | 2 | |
| 22 | — | 20 | 30 | — | — | 200 | 3 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● The rounded edge of the blade rear end suppresses machining streaks caused by the multi-stage machining of side surfaces. (Product in figure 3 only)
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Type
- TSC-LS-HEM4S
- TSC-LS-HPEM4S
-
Geometry
- Sharp Corner
- With Lead
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.