Centronics Connector with Dust-proof Cap

Click on this image to zoom in.

Centro dedicated dust cap to prevent the intrusion of dust

● Mounted on the coupling surface of the Centronics connector, it prevents the intrusion of dirt and dust from the outside.

·As it is not waterproof, avoid using in areas prone to being splashed by water.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Specifications

Centronics Connector with Dust-proof Cap:Related Image

Manufacturer: DDK

Centronics Connector with Dust-proof Cap:Related Image

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Compatible Connector Form	Number of Cores (Core)
3.14 €	1	Available	5 Days	10	Male	14
3.81 €	1	Available	5 Days	10	Female	14
3.14 €	1	Available	5 Days	10	Male	36
4.27 €	1	Available	5 Days	10	Female	36
4.29 €	1	Available	5 Days	10	Female	50

Material / Finish

Soldering Type, Gender Changer

Item	Materials	Finish
Insulator (RC Type)	Glass-Filled Polybutylene Terephthalate	UL94V-0, Blue
Insulator (Type 57, Angle Type)	DAP Resin	UL94V-0, Blue
Contact	Copper Alloy	Nickel Base Gold Plating
Shell	Steel	Nickel-plated
Hood (Angle Type Only)	Aluminum Alloy	Rustproofing Treatment
Spring Latch	Stainless Steel	-

Soldering Type

Pressure Welding Type

Pressure Welding Type

* 57F series is made up of 4 components: insulator, contact, strain relief, and pressure welding cover.

Compatible Wire

Connector Type	Single Wire Conductor Diameter	Stranded Wire Conductor Cross-sectional Area	AWG Size
Soldering Type	0.65 mm or less	0.2 mm2 or less	Stranded Wire AWG24 or less Single Wire AWG22 or less
Pressure Welding Type	-	-	AWG26 (Single Wire), AWG28 (Stranded Wire, Single Wire) or AWG30 (Single Wire) 1.27 mm Pitch Flat Cable

Electrical Properties

Item	Soldering Type	Pressure Welding Type
Rated Current	5 A or lower	1 A or lower
Rated Voltage	500 VAC or less	250 VAC or less
Contact Resistance	35 mΩ or less / 1 ADC	35 mΩ or less / 1 ADC
Insulation Resistance	1,000 MΩ or more / 500 VDC	1,000 MΩ or more / 500 VDC
Withstand Voltage	1,000 VAC / minute	500 VAC / minute
Operating Temperature Range	-55°C ~ +105°C	-55°C ~ +105°C

Mechanical Properties

Item	Characteristics	Conditions
Insertion and Extraction Force Per Single Pole	Insertion Force: 112 g or less, Extraction Force: 86 g or less	When the plug and socket are inserted and extracted, the total extraction force is divided by each core number to convert into force per single pole
Vibration Resistance	· No interruption to power supplies of 1 μs or more · No abnormalities such as damage etc. on the connector	In compliance with MIL-STD-202 test method condition 204 A, simple vibration with smaller amplitude, either the total amplitude of 1.52 mm from 10 Hz to 500 Hz or 10 G (gravity units) is applied to each for 3 hours in mutually perpendicular 3-axis direction.
Impact Resistance	No cracks in the connector or abnormalities such as loosening in breakable parts	Impact of 50 G with duration 11 msec is applied to the coupled connector in mutually perpendicular axis direction.
Insertion and Removal Durability	No mechanical damage	Perform insertion and removal 500 times at speeds not exceeding 500 times per 1 hour.

Environmental Properties

Item	Characteristics	Conditions
Temperature Resistance	There should be no physical damage or obstacle when inserting or removing the connector	Repeatedly expose to temperatures +85°C and -55°C for 30 minutes 5 times each. However, do not expose to room temperature for 5 minutes or more when moving from low temperature to high and from high temperature to low.
Humidity Resistance	· There should be no mechanical damages · Voltage Resistance 300 VAC 1 minute	Perform 96-hour humidity test with the connector detached in compliance with MIL-STD-202 test method 103 B.
Corrosion Resistance	There should be no significant corrosion or obstacle when inserting or removing the connector	After performing a 48-hour salt spray test with the connector attached in compliance with MIL-STD-202 test method condition 101 B, the connector is uncoupled, washed, and dried for 12 hours in a drying oven at 38°C.