Szűrési feltételek
  • Készlet
  • Characteristics/Applications
    • Module
    • Length L(mm)
    • Material
      • Resin
    • Material Details
    • Surface Treatment
    • Length (nominal)
    • Number of Effective Teeth(teeth)
    • Tooth Width W (or D)(mm)
    • End Face Machining
      • Provided
    • CAD
    • Becsült szállítási napok
      • Minden
      • Aznapi feladás lehetséges
      • 7 munkanapok belül
    • Rack gears / contact angle 20 degrees / dimension L standard

      Cikkszám:

      Befejezetlen: 92 javaslat található.
      Mennyiség:

      Vázlatrajz és specifikációs táblázat

      Dimensional Drawing

      Hole Machining N: No Hole Machining
      Hole machining KA: Side Through Hole
      Hole Machining ST: Side Tapped
      Hole machining A: Back Tapped
      Hole Machining Z: Side Counterbored
      ModuleB
      (Hole Pitch)
      M
      (Coarse)
       d1 d2 Z1
      0.51803.5
      0.83.5
      1.0M33.56.53.5
      1.5M44.584.5
      2.0M55.59.55.5
      2.5M55.59.56.5
      3.0M55.59.55.5
       ■Both Ends Machined Type




       
      Enlarged View of End Face (Both Ends Machined Type)
      ModuleP Tolerance
      0.5 to 2.0-0.1
      -0.3
      2.5·3.0-0.1
      -0.4
        [ ! ] F = L-B× (K-1)2
      Metal: L Tolerance (mm)Plastic: L Tolerance (mm)W, H Dimension Tolerance (mm)Accumulated Pitch Error (μm)
      ModuleTolerance
      0.5 to 2.0-0.2 to -0.6
      2.5 to 3.0-0.2 to -0.8
      Overall Length (L)Tolerance
      50 to 100±1.2
      101 to 200±1.4
      201 to 300±1.6
      301 to 400±1.8
      401 to 500±2.0
      501 to 600±2.2
      601 to 700±2.4
      701 to 800±2.6
      801 to 900±2.8
      901 to 1000±3.0
      Standard Dimension Range (mm)Tolerance
      Overor Less
      050 to -0.18
      6100 to -0.22
      11180 to -0.27
      19300 to -0.33
      31500 to -0.39
      ModuleNominal, Overall Length L
      Up to 100101 to 300301 to 500501 to 1000
      0.5 to 1.554 (76)65 (92)72 (101)100 (117)
      2.0 to 3.062 (86)73 (102)80 (112)91 (128)
      [ ! ] Values in ( ) are for RGEAS, RGEAM, RGEAP
      [ ! ] Dimensions may change depending on temperature and humidity.
      TypeMaterialSurface Treatment
      RGEAEN 1.1191 Equiv.Black Oxide
      RGEABFree-cutting brass-
      RGEASEN 1.4301 Equiv.-
      RGEAMMC Nylon (Blue)-
      RGEAPPolyacetal (White)-
      [ ! ] Surface treatment is not applied to the holes in KA, A, ST and Z hole machining.
      [ ! ] Material: MC Nylon and Polyacetal dimensions may change depending on the operating environment.
      [ ! ] Flatness (warpage) accuracy is L = 500 or less: 0.2, 501 or more: 0.3.
      [ ! ] This product is not hardened.

      Specification Table

      Part NumberNominalHole Machining
      RGEA1.0500A
       
      Part NumberNominalHole MachiningEffective
      Number of Teeth
      LP
      (Pitch)
      WHhK
      (Number of Holes)
      TypeModule
      RGEA

      RGEAB

      RGEAS

      RGEAM

      RGEAP
      0.5100
      N
      (No Hole Machining)

      KA
      (Side Through Hole)
      6398.961.571398.5
      300192301.592
      500318499.513
      0.81003998.012.5134109.2
      300120301.592
      500198497.633
      1.0100
      N
      (No Hole Machining)

      A
      (Back Tapped)

      ST
      (Side Tapped)

      Z
      (Side Counterbored)
      3094.253.1421012 (10)11 (9)
      30095298.452
      500159499.513
      1000318999.026
      RGEA

      RGEAS

      RGEAP
      1.51002198.964.7121520 (15)18.5 (13.5)
      30063296.882
      500106499.513
      1000212999.026
      2.01001594.256.2832025 (20)23 (18)
      30047295.312
      50079496.373
      1000159999.026
      2.51001294.257.8542530 (25)27.5 (22.5)
      30038298.452
      50063494.83
      1000127997.46
      3.01001094.259.4253035 (30)32 (27)
      30031292.172
      50053499.513
      1000106999.026
      [!] Hole drilling cannot be selected for nominal size 100. [!] H,h () is the value for EN 1.4301 Equiv..

      Alterations

      AlterationsOne End TappedBoth Ends TappedTapped Hole Dimension Change
      CodeMCWMCTPC
      Spec. Ordering Code MC5 Ordering Code WMC5Changes the tapped hole dimension.
      Ordering Code TPC4
             M  TPC
      M3M4
      M4M3 M5
      M5M4 M6 M8
      Module M Selection 
      1.034  
      1.5 to 3.0 456
      Module M Selection 
      1.034  
      1.5 to 3.0 456
      [NG] For RGEAS, M4 is not available for module 1.0.[NG] For RGEAS, M4 is not available for module 1.0.

       

      General information - Rack Gears

      Rack gear product assortment - steel rack gear - stainless steel rack gear - brass rack gear - plastic rack gear - hardened rack gear

       

      Selection Details of Rack Gears

      -Material: steel, stainless steel, brass, plastic

      -Coatings: uncoated, burnished

      -Heat treatment: untreated, surface curing (induction hardened)

      -Module: 0.5, 0.8, 1, 1.5, 2, 2.5, 3

      -Width: 3 to 30 mm

      -Number of teeth: 9 to 192

      -Outer diameter (round): 8 to 30 mm

      -Length: 20 to 1980 mm

       

      Description / Rack Gear Basics

      The rack gear from MISUMI are fundamentally used for motion conversion. The rack gear allows converting a rotary motion into a linear motion or a linear motion into a rotary motion. A rack gear can transmit high forces due to the form-fitting gearing. In connection with a gear wheel or spur gear, a gear rack drive forms a slip-free transmission of force and prevents a slip-through. For a large number of applications, the slip-free transmission of the rack gear is an efficient transmission of force and motion. The rack gear drive also withstands high loads with a compact design. With rack gears, high speeds can also be driven in applications with low noise generation. With MISUMI, you can configure your rack gears individually in length and in other parameters.

      During the transfer of motion, the teeth intertwine and largely unroll during the transfer to one another. The rack gear can be used for the transfer of motion almost over the entire length. To prevent the gear wheel from overflowing, for example, stopper bolts or stopper blocks are recommended. Since the module is standardized, it must be ensured for the construction of a rack drive that the same module is used for the rack and the gear wheel. The rack gear allows precise control by directly transmitting motion, torque and speed.

      For high wear resistance and reliability, our product range also offers surface-hardened rack gears. The hardened rack gear has a harder surface of the teeth, which makes it less susceptible to wear and tear. Their long service life helps reduce production downtime. Hardened rack gears are also less susceptible to locking-related play and retain their precision in the long term. This aspect makes hardened rack gears particularly recommended for precise applications.

      A rack gear drive has a low backlash. In general, the tooth flank clearance is used for assembly and thermal expansion. Like the head play, it can serve as a gap for lubricants. For very precise applications, the reverse play is not beneficial. In order to minimize this during precision applications, pre-tensioning is required. On lifting tables, the dead weight already generates a vertical pretension in the rack gear, which minimizes the reverse play. If the rack gear is aligned horizontally, a separate pretension should be used to reduce the reverse play. This can be achieved with tension springs or other exciting components, for example. When selecting a suitable rack gear, the first decision criterion is the material of the rack gear drive. The following are some advantages of the rack gear materials:

       

      Steel rack gears

      Rack gears made of steel have high strength and withstand high loads. Therefore, steel rack gears are suitable for heavy loads. The material surface can be hardened to increase wear resistance. This makes the rack gear resistant and durable. In addition, steel is very heat-resistant and is suitable for applications in which high ambient temperatures occur. One disadvantage of steel is its low corrosion resistance.

       

      Stainless steel rack gears

      Stainless steel rack gears are highly corrosion resistant, since stainless steel forms a passive layer (oxide layer). This makes them suitable for applications where higher humidity is found. Furthermore, stainless steel offers good chemical resistance. Like steel, stainless steel is temperature resistant without losing strength. High temperatures can cause discoloration (tempering colour) in stainless steel. However, this does not affect the function in any way. Similar to the steel, stainless steel is robust and has a long service life. Another advantage is that rack gears made of stainless steel have hygienic properties. Therefore, this material is often used in the pharmaceutical industry and in medical technology.

       

      Brass rack gears

      Brass rack gears are well protected against corrosion. Therefore, a brass rack gear is well suited in corrosive environments. Depending on the application, it can be advantageous that brass does not tend to spark when abrasion is applied. In addition, brass has a high strength and ductility. This allows the material to deform before it breaks. Brass rack gears have a high thermal conductivity, which allows heat to be dissipated similar to a heat sink. The perhaps most important property of the brass rack gear is its gliding property. In the case of a lubrication film dissipates, this property serves as a certain fail-safe.

       

      Lubrication of rack gears

      The lubrication of the rack gear is decisive for low-wear operation. The lubrication reduces the friction on the tooth flanks of the rack gear and the pinion, which reduces the material abrasion. In this way, proper lubrication of the rack gear increases the service life, performance and ensures long-term precision. In principle, a rack can be lubricated with grease or oil. The type of lubrication that is suitable depends on several factors such as temperature, load and speed. Grease lubrication is often used for high loads and torques, while oil lubrication is used for high speeds. Lubricant manufacturers offer a suitable lubricant for almost all load cases. Before re-lubricating, the tooth drive should be thoroughly cleaned to prevent damage to the tooth flanks or teeth from contamination. Depending on the application, the lubricant can be sprayed, brushed, or sprayed onto the rack gear. The lubrication intervals must be selected depending on the application and the lubricant used. It is always recommended to adjust the lubrication intervals to the given circumstances.

       

      Application examples - Rack Gears

      Application example: rack gear - round rack gear - rack gear with spur gear - rack gear with pinion - rack gear with handle

      Application example - rack gear with spur gear
      (1) Spur gear, (2) Clamping knobs, (3) Rack gear

       

      Industrial applications

      3D printer industry
      Automotive industry
      Pharmaceutical industry
      Packaging industry

      Cikkszámlista

      Elemek száma

      Characteristics/Applications

      Module

      Length L

      (mm)

      Material

      Material Details

      Surface Treatment

      Length (nominal)

      Number of Effective Teeth

      (teeth)

      Tooth Width W (or D)

      (mm)

      End Face Machining

      Rack Height

      (mm)

      Hole Machining

      RoHS?Minimális rendelési mennyiség
      Low Dust Generation / Insulation / Non-magnetic
      0.5
      301.59
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      300
      192
      3
      [Provided] Both Ends Machined Type
      9
      KA (Side Through Hole)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.5
      301.59
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      300
      192
      3
      [Provided] Both Ends Machined Type
      9
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.8
      301.59
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      300
      120
      4
      [Provided] Both Ends Machined Type
      10
      KA (Side Through Hole)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.8
      301.59
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      300
      120
      4
      [Provided] Both Ends Machined Type
      10
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      298.45
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      300
      95
      10
      [Provided] Both Ends Machined Type
      12
      A (Back Tapped)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      298.45
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      300
      95
      10
      [Provided] Both Ends Machined Type
      12
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      298.45
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      300
      95
      10
      [Provided] Both Ends Machined Type
      12
      ST (Side Tapped)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      298.45
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      300
      95
      10
      [Provided] Both Ends Machined Type
      12
      Z (Side Counterbored)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      499.51
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      159
      10
      [Provided] Both Ends Machined Type
      12
      A (Back Tapped)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      499.51
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      159
      10
      [Provided] Both Ends Machined Type
      12
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      499.51
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      159
      10
      [Provided] Both Ends Machined Type
      12
      ST (Side Tapped)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      499.51
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      159
      10
      [Provided] Both Ends Machined Type
      12
      Z (Side Counterbored)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      505
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      159
      10
      Economy Type
      12
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      505
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      105
      15
      Economy Type
      20
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2
      505
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      79
      20
      Economy Type
      25
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2.5
      505
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      63
      25
      Economy Type
      30
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      3
      505
      [Resin] MC Nylon
      MC Nylon
      Not Provided
      500
      52
      30
      Economy Type
      35
      N (No Hole Machining)
      10
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.5
      98.96
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      100
      63
      3
      [Provided] Both Ends Machined Type
      9
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.5
      301.59
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      192
      3
      [Provided] Both Ends Machined Type
      9
      KA (Side Through Hole)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.5
      301.59
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      192
      3
      [Provided] Both Ends Machined Type
      9
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.5
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      318
      3
      [Provided] Both Ends Machined Type
      9
      KA (Side Through Hole)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.5
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      318
      3
      [Provided] Both Ends Machined Type
      9
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.8
      98.01
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      100
      39
      4
      [Provided] Both Ends Machined Type
      10
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.8
      301.59
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      120
      4
      [Provided] Both Ends Machined Type
      10
      KA (Side Through Hole)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.8
      301.59
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      120
      4
      [Provided] Both Ends Machined Type
      10
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.8
      497.63
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      198
      4
      [Provided] Both Ends Machined Type
      10
      KA (Side Through Hole)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      0.8
      497.63
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      198
      4
      [Provided] Both Ends Machined Type
      10
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      318
      10
      [Provided] Both Ends Machined Type
      12
      A (Back Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      318
      10
      [Provided] Both Ends Machined Type
      12
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      318
      10
      [Provided] Both Ends Machined Type
      12
      ST (Side Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      318
      10
      [Provided] Both Ends Machined Type
      12
      Z (Side Counterbored)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      94.25
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      100
      30
      10
      [Provided] Both Ends Machined Type
      12
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      298.45
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      95
      10
      [Provided] Both Ends Machined Type
      12
      A (Back Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      298.45
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      95
      10
      [Provided] Both Ends Machined Type
      12
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      298.45
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      95
      10
      [Provided] Both Ends Machined Type
      12
      ST (Side Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      298.45
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      95
      10
      [Provided] Both Ends Machined Type
      12
      Z (Side Counterbored)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      159
      10
      [Provided] Both Ends Machined Type
      12
      A (Back Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      159
      10
      [Provided] Both Ends Machined Type
      12
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      159
      10
      [Provided] Both Ends Machined Type
      12
      ST (Side Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      159
      10
      [Provided] Both Ends Machined Type
      12
      Z (Side Counterbored)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      212
      15
      [Provided] Both Ends Machined Type
      20
      A (Back Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      212
      15
      [Provided] Both Ends Machined Type
      20
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      212
      15
      [Provided] Both Ends Machined Type
      20
      ST (Side Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      212
      15
      [Provided] Both Ends Machined Type
      20
      Z (Side Counterbored)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      98.96
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      100
      21
      15
      [Provided] Both Ends Machined Type
      20
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      296.88
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      63
      15
      [Provided] Both Ends Machined Type
      20
      A (Back Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      296.88
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      63
      15
      [Provided] Both Ends Machined Type
      20
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      296.88
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      63
      15
      [Provided] Both Ends Machined Type
      20
      ST (Side Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      296.88
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      63
      15
      [Provided] Both Ends Machined Type
      20
      Z (Side Counterbored)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      106
      15
      [Provided] Both Ends Machined Type
      20
      A (Back Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      106
      15
      [Provided] Both Ends Machined Type
      20
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      106
      15
      [Provided] Both Ends Machined Type
      20
      ST (Side Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      1.5
      499.51
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      500
      106
      15
      [Provided] Both Ends Machined Type
      20
      Z (Side Counterbored)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      159
      20
      [Provided] Both Ends Machined Type
      25
      A (Back Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      159
      20
      [Provided] Both Ends Machined Type
      25
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      159
      20
      [Provided] Both Ends Machined Type
      25
      ST (Side Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2
      999.02
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      1,000
      159
      20
      [Provided] Both Ends Machined Type
      25
      Z (Side Counterbored)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2
      94.25
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      100
      15
      20
      [Provided] Both Ends Machined Type
      25
      N (No Hole Machining)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2
      295.31
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      47
      20
      [Provided] Both Ends Machined Type
      25
      A (Back Tapped)
      -
      1 darab
      Low Dust Generation / Insulation / Non-magnetic
      2
      295.31
      [Resin] Polyacetal
      Polyacetal
      Not Provided
      300
      47
      20
      [Provided] Both Ends Machined Type
      25
      N (No Hole Machining)
      -
      1 darab
      Egységár (HÉA nélkül)(egységár adóval)
      Normál feladási dátum
      40.51 €
      ( 48.21 € )
      7 munkanapok
      34.17 €
      ( 40.66 € )
      Raktári cikk - 1 munkanapAznapi kiszállítással elérhető
      37.11 €
      ( 44.16 € )
      7 munkanapok
      34.67 €
      ( 41.26 € )
      Raktári cikk - 1 munkanapAznapi kiszállítással elérhető
      55.66 €
      ( 66.24 € )
      7 munkanapok
      47.82 €
      ( 56.91 € )
      7 munkanapok
      55.66 €
      ( 66.24 € )
      7 munkanapok
      60.48 €
      ( 71.97 € )
      7 munkanapok
      85.02 €
      ( 101.17 € )
      7 munkanapok
      77.31 €
      ( 92.00 € )
      7 munkanapok
      85.02 €
      ( 101.17 € )
      7 munkanapok
      96.27 €
      ( 114.56 € )
      7 munkanapok
      71.10 €
      ( 84.61 € )
      7 munkanapok
      85.78 €
      ( 102.08 € )
      7 munkanapok
      109.45 €
      ( 130.25 € )
      7 munkanapok
      142.21 €
      ( 169.23 € )
      7 munkanapok
      170.43 €
      ( 202.81 € )
      7 munkanapok
      20.58 €
      ( 24.49 € )
      7 munkanapok
      36.42 €
      ( 43.34 € )
      7 munkanapok
      28.43 €
      ( 33.83 € )
      7 munkanapok
      51.01 €
      ( 60.70 € )
      7 munkanapok
      39.01 €
      ( 46.42 € )
      7 munkanapok
      21.41 €
      ( 25.48 € )
      7 munkanapok
      37.01 €
      ( 44.04 € )
      7 munkanapok
      29.02 €
      ( 34.53 € )
      7 munkanapok
      54.30 €
      ( 64.62 € )
      7 munkanapok
      42.29 €
      ( 50.33 € )
      7 munkanapok
      106.84 €
      ( 127.14 € )
      7 munkanapok
      92.04 €
      ( 109.53 € )
      7 munkanapok
      106.84 €
      ( 127.14 € )
      7 munkanapok
      111.66 €
      ( 132.88 € )
      7 munkanapok
      27.88 €
      ( 33.18 € )
      7 munkanapok
      47.31 €
      ( 56.30 € )
      7 munkanapok
      39.29 €
      ( 46.76 € )
      7 munkanapok
      47.31 €
      ( 56.30 € )
      7 munkanapok
      47.31 €
      ( 56.30 € )
      7 munkanapok
      70.29 €
      ( 83.65 € )
      7 munkanapok
      58.28 €
      ( 69.35 € )
      7 munkanapok
      70.29 €
      ( 83.65 € )
      7 munkanapok
      70.29 €
      ( 83.65 € )
      7 munkanapok
      109.84 €
      ( 130.71 € )
      7 munkanapok
      95.04 €
      ( 113.10 € )
      7 munkanapok
      109.84 €
      ( 130.71 € )
      7 munkanapok
      114.53 €
      ( 136.29 € )
      7 munkanapok
      29.79 €
      ( 35.45 € )
      7 munkanapok
      47.62 €
      ( 56.67 € )
      7 munkanapok
      39.62 €
      ( 47.15 € )
      7 munkanapok
      47.62 €
      ( 56.67 € )
      7 munkanapok
      47.62 €
      ( 56.67 € )
      7 munkanapok
      76.60 €
      ( 91.15 € )
      7 munkanapok
      64.60 €
      ( 76.87 € )
      7 munkanapok
      76.60 €
      ( 91.15 € )
      7 munkanapok
      76.60 €
      ( 91.15 € )
      7 munkanapok
      120.82 €
      ( 143.78 € )
      7 munkanapok
      106.11 €
      ( 126.27 € )
      7 munkanapok
      120.82 €
      ( 143.78 € )
      7 munkanapok
      130.63 €
      ( 155.45 € )
      7 munkanapok
      30.76 €
      ( 36.60 € )
      7 munkanapok
      56.17 €
      ( 66.84 € )
      7 munkanapok
      48.15 €
      ( 57.30 € )
      7 munkanapok

      Részletes információk

      Vázlat és specifikációk

      Specifications/Overview

      How to Connect Rack Gears (Both Ends Machined Type)
      MISUMI Rack Gears (Both Ends Machined Type) are end machined with negative pitch tolerance in length.
      When connecting the racks, use a piece of rack (rack gear in the same module) as a spacer jig as shown in the right side figure to properly adjust the pitch.


        Rack Gear Flatness Measurement Method
      Measure the gap with the rack gear teeth facing up and both ends grounded.
      Flatness Tolerance
      0.2 for L = 500 or less
      0.3 for L = 501 or more