Szűrési feltételek
  • Belt Width(mm)
  • Operating belt width(Inch)
  • [T] Number of Teeth
  • Pulley Shape
  • Material
    • Aluminum
  • Surface Treatment
  • Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)
    [3–34/1mm egység]
  • Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)
    [10–31/1mm egység]
  • Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)
  • Shaft Bore Specifications (Round Hole + Tap) [P](mm)
    [3–22/1mm egység]
  • Shaft Bore Specifications (Round Hole) [H](mm)
    [3–36/1mm egység]
  • Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
  • Shaft Bore Specifications (Stepped Hole) [V](mm)
    [3–34/1mm egység]
  • Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)
    [3–24/1mm egység]
  • WB
      [3–34/1]
    • CAD
    • Becsült szállítási napok
      • Minden
      • 8 munkanapok belül
      • 10 munkanapok belül
      • 14 munkanapok belül

    Timing belt pulleys / MXL / flanged pulley selectable / configurable / material selectable / treatment selectable

    Cikkszám:

    Befejezetlen: 2,111 javaslat található.
    Mennyiség:

    Vázlatrajz és specifikációs táblázat

    Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

    Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

    Timing Pulleys MXL Type:Related Image
    Open the technical drawing in the new window
     

    Available dimensions and tolerances can be found under the tab More Information.
     

    Basic Properties (e.g., material, hardness, coating, tolerance) - Toothed Pulleys/Timing Pulleys/Idler Pulleys

     
    TypeBelt Width Material *1 Surface Treatment Accessory *1
    Set Screw
    4.8mm
    (3/16 inch)
    6.4mm
    (1/4 inch)
    9.5mm
    (3/8 inch)
    12.7mm
    (1/2 inch)
    PulleyFlange
    MXL019MXL025MXL037MXL050
    ATPA2000
    Aluminum Alloy
    Aluminum AlloyClear AnodizeEN 1.4301 Equiv.
    BTPBlack Anodize
    KTPHard Clear Anodize *2
    NTPElectroless Nickel Plating
    MTP--EN 1.1191 Equiv.EN 1.0330 Equiv.-EN 1.7220 Equiv.
    (Black Oxide)
    MTPB--Black Oxide
    MTPP--Electroless Nickel Plating
    STP--EN 1.4301 Equiv.EN 1.4301 Equiv.-EN 1.4301 Equiv.
    Flange is installed, and set screws are included with Shaft Bores P, N and C.
    *1. The above material and accessory might be changed to the ones equivalent to the originals.
    *2. Hard Clear Anodize: Film Hardness 300HV ~

    Further specifications can be found under the tab More Information.
     

    Composition of a Product Code - Toothed Pulleys/Timing Pulleys/Idler Pulleys

     Part Number-Pulley Shape-Shaft Bore Specs., I.D.-Z-J-Q-R-S-T
    (Shaft Bore Specs.: H, P, N, C)ATP40MXL025-B-N10       R16    
    (Shaft Bore Specs.: V, F)ATP60MXL037-B-V8-Z14-J13.0       
    (Shaft Bore Specs: Y)ATP48MXL050-A-Y8    -Q16--S5-T5

    Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

    Timing Pulleys MXL Type:Related Image

    Here to the Overview of Options as PDF.

    General Information - Toothed Pulleys/Timing Pulleys/Idler Pulleys

    Toothed pulley - synchronous pulley - belt pulley - product assortment

     

    Selection details of toothed pulleys/timing pulleys/idler pulleys

    - Material: aluminum, steel, stainless steel (stainless steel), plastic

    - Coatings: uncoated, burnished, anodized, nickel-plated

    - Profile form: 1.5GT, 2GT, 3GT, 5GT, P2M, P3M, P5M, P8M, S2M, S3M, S5M, S8M, S14M, T2.5, T5, T10, AT5, AT10, 5M, 8M, 14M, 8YU, H, L, MXL, XL, PowerGrip GT3: MR2, MR3, MR5

    - ISO tolerances: H7

    - Belt width (mm): 4, 4.8, 6, 6.4, 7, 7.9, 9, 9.5, 10, 12, 12.7, 15, 18, 19.1, 20, 25, 25.4, 26, 28, 30, 31, 38,1, 40, 50, 50.8, 53, 60, 74, 76.2, 100

    - Belt width (inches): 0.19, 0.25, 0.31, 0.37, 0.5, 0.75, 1, 1.5, 2

    - Number of teeth: 10 to 72

     

    Description/Basics

    The toothed pulley for mechanical engineering is intended for the transmission of force and torque. Timing pulleys enable a gear ratio of speeds through belt pulleys of different sizes. Timing pulleys are more efficient, durable and significantly more maintenance-friendly compared to chain transmissions.

    How much torque and load a timing pulley can transmit depends on the width of the belt. The width of the belt must be calculated. It is recommended to ensure the belt is correctly tensioned. MISUMI already offers the suitable idler pulley and return rollers with integrated ball bearings. For design and design help follow this link.

    Different profile shapes of the toothed belts and belt pulleys are responsible for the transmission of power. Depending on the positioning accuracy, the applied torque and the conveying weight, MISUMI offers the fitting pulley. Toothed belt drives are generally used in the industry in three areas:
    Positioning: Timing pulleys is often used in 3D printers. A toothed pulley with a semi-circular profile (e.g., GT) is often used for the required position accuracy of a 3D printers. The round shape offers the benefit of little play when the direction changes.
    Drive: toothed pulleys are also used for high torque. In most cases, a timing pulley with a rounded trapezoidal profile (e.g., S8M) is used. These are particularly well suited for the transmission of high forces, which occur in drives of various applications in order to drive mechanical components.
    Conveying: toothed pulleys can also be used for transporting loads. A straight trapezoidal profile is often used for this purpose (e.g., AT). This toothed pulley shape offers a large surface for loading and transmitting of loads.

    Which toothed pulley or timing pulley is the right one for your application depends on the respective task of the toothed belt drive. Different toothed disc profiles have proven themselves for each type of application.

    Various bore hole shapes and fastening variants are available for shaft mounting. These allow fastening via set screws, keyways and by means of Mecha locks. Fastening via a clamping sleeve has the further advantage that it allows adjusting the alignment continuously. The MISUMI product assortment has these ready-to-install.

    Application Examples - Toothed Pulleys/Timing Pulleys/Idler Pulleys

    Application example: idler pulley - idler pully toothed with chain tensioner - toothed pulley with chain tensioner

    Application example: idler pulley
    (1) Idler pulleys, (2) chain tensioner

    Application example: return roller - return roller with cantilever pin - synchronous pulley with on-board disc - toothed pulley with on-board disc

    Application example: deflection roller
    S (1) Toothed pulleys with crimp disc, (2) nut, (3) washer, (4) cantilever shaft, (5) retaining ring

    Application example: synchronous pulleys - toothed pulleys with toothed belts - toothed pulley with screw-on clamp

    Application example: timing pulleys
    (1) Flat head screw, (2) Timing pulley, (3) Timing belt, (4) Screw-on terminal

    Application example: toothed belt drives - toothed pulleys with crimp disc - idler pulley with crimp disc - tensioning of the toothed belt

    Application example: of toothed belt drives
    (1) Toothed belt, (2) driven toothed pulley with crimp disc, (3) idler pulley with crimp disc, (4) driving toothed pulley with crimp disc

     

    Industrial Applications

    3D printer industry
    Automotive industry
    Pharmaceutical industry
    Packaging industry

    Cikkszámlista

    Elemek száma

    Belt Width

    (mm)

    Operating belt width

    (Inch)

    [T] Number of Teeth

    Pulley Shape

    Material

    Surface Treatment

    NFCN

    Shaft Bore Specifications (Both Ends Stepped Hole) [Y]

    (mm)

    Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N]

    (mm)

    Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C]

    (mm)

    Shaft Bore Specifications (Round Hole + Tap) [P]

    (mm)

    Shaft Bore Specifications (Round Hole) [H]

    (mm)

    Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]

    Shaft Bore Specifications (Stepped Hole) [V]

    (mm)

    Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F]

    (mm)

    WB

    RoHS?Minimális rendelési mennyiség
    6.4
    0.25
    14
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    14
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    14
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    14
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    14
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    14
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    15
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    15
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    15
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    15
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    15
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    15
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 4
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    16
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    16
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    6.4
    0.25
    16
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    16
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    16
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    16
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    16
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    9.5
    0.37
    16
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    16
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    16
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    17
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    17
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    6.4
    0.25
    17
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    17
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    17
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    17
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    17
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    9.5
    0.37
    17
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    17
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    17
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    18
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    18
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    6.4
    0.25
    18
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    18
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    18
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    18
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    18
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    9.5
    0.37
    18
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    18
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    18
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    19
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    19
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    6.4
    0.25
    19
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    19
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    19
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    19
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    19
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    9.5
    0.37
    19
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    19
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    10
    1 darab
    9.5
    0.37
    19
    Shape K
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    20
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 6
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    20
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3 ~ 4
    -
    -
    10
    1 darab
    6.4
    0.25
    20
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    3 ~ 4
    -
    -
    -
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    20
    Shape B
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    -
    3
    -
    10
    1 darab
    6.4
    0.25
    20
    Shape B
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 6
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    20
    Shape B
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    3 ~ 5
    -
    -
    -
    -
    -
    10
    1 darab
    6.4
    0.25
    20
    Shape B
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    -
    -
    3
    -
    -
    10
    1 darab
    9.5
    0.37
    20
    Shape A
    EN 1.1191 Equiv.
    Electroless Nickel Plating
    -
    -
    -
    -
    -
    3 ~ 6
    -
    -
    -
    -
    10
    1 darab
    Egységár (HÉA nélkül)(egységár adóval)
    Normál feladási dátum
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok
    -
    ( - )
    10 munkanapok

    Részletes információk

    Alapvető információk

    Vigyázat

    • Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

    Vázlat és specifikációk

    Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

    Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

    Timing Pulleys MXL Type:Related Image
    Open the technical drawing in the new window

    Specification Tables - Toothed Pulleys/Timing Pulleys/Idler Pulleys

    Part NumberPulley Shape
    AB, K
    Shaft Bore Specifications (~): Specify in 1mm Increment, (, ): Select the former or latterShaft Bore Specifications (~): Specify in 1mm Increment, (, ): Select the former or latter
    TypeNumber of TeethBelt
    Nominal Width
    Pulley
    Shape
    H
    Round Hole
    N, C
    Keyway
    (Without Tap)
    V Stepped HoleY Both Ends Stepped HoleH
    Round Hole
    P
    Round Hole + Tap
    N, C
    Keyway + Tap
    V, F Stepped Hole
    VZ
    Z-d≥2
    J
    (0.1mm Increment)
    YQ, R
    Q(R)-Y≥2
    S, TV, FZ
    Z-d≥2
    J
    (0.1mm Increment)
    Aluminum
    ATP
    BTP
    KTP
    NTP


    Steel
    MTP
    MTPB
    MTPP


    Stainless Steel
    STP
    14MXL019

    MXL025

    MXL037

    MXL050
    A

    K
    3, 4-------3, 43, 4----
    153, 43, 43, 4
    163, 4, 5352.0≤J≤W-2.0353~7
    S+T≤W-3
    3, 4, 53, 4, 5
    173, 4, 535353, 4, 53, 4, 5
    183, 4, 535353, 4, 53, 4, 5
    193, 4, 535353, 4, 53, 4, 5
    20A

    B
    3~6-3, 45, 63, 45, 63~63, 4, 5-352.0≤J≤L-2.0
    213~63, 45, 63, 45, 63~63, 4, 535
    223~63, 45, 63, 45, 63~63, 4, 535
    233~6, 6.35, 7, 83~65~83~65~83~6, 6.35, 73~6, 6.35, 73~55~7
    243~6, 6.35, 7, 83~65~83~65~83~6, 6.35, 73~6, 6.35, 73~55~7
    253~6, 6.35, 7, 83~65~83~65~83~6, 6.35, 73~6, 6.35, 73~55~7
    263~6, 6.35, 7~93~75~93~75~93~6, 6.35, 7, 83~6, 6.35, 7, 83~65~8
    274~6, 6.35, 7~94~76~94~76~94~6, 6.35, 7, 84~6, 6.35, 7, 84~66~8
    284~6, 6.35, 7~94~76~94~76~94~6, 6.35, 7, 84~6, 6.35, 7, 84~66~8
    304~6, 6.35, 7~1184~96~114~96~114~6, 6.35, 7~104~6, 6.35, 7, 84~86~10
    324~6, 6.35, 7~1184~96~114~96~114~6, 6.35, 7~104~6, 6.35, 7, 84~86~10
    344~6, 6.35, 7~1184~96~114~96~114~6, 6.35, 7~104~6, 6.35, 7, 84~86~10
    365, 6, 6.35, 7~138, 10, NK10, 115~117~135~117~135, 6, 6.35, 7~125, 6, 6.35, 7~1085~107~12
    385, 6, 6.35, 7~138, 10, NK10, 115~117~135~117~135, 6, 6.35, 7~125, 6, 6.35, 7~1085~107~12
    405, 6, 6.35, 7~158, 10, NK10, 11~135~137~155~137~155, 6, 6.35, 7~145, 6, 6.35, 7~108, 10, NK105~127~14
    425, 6, 6.35, 7~158, 10, NK10, 11~135~137~155~137~155, 6, 6.35, 7~145, 6, 6.35, 7~108, 10, NK105~127~14
    445, 6, 6.35, 7~188, 10, NK10, 11~165~167~185~167~185, 6, 6.35, 7~165, 6, 6.35, 7~128, 10, NK10, 11~125~147~16
    465, 6, 6.35, 7~188, 10, NK10, 11~165~167~185~167~185, 6, 6.35, 7~165, 6, 6.35, 7~128, 10, NK10, 11~125~147~16
    485, 6, 6.35, 7~208, 10, NK10, 11~175~187~205~187~205, 6, 6.35, 7~185, 6, 6.35, 7~138, 10, NK10, 11~135~167~18
    505, 6, 6.35, 7~208, 10, NK10, 11~175~187~205~187~205, 6, 6.35, 7~185, 6, 6.35, 7~138, 10, NK10, 11~135~167~18
    605, 6, 6.35, 7~278, 10, NK10, 11~235~257~275~257~275, 6, 6.35, 7~245, 6, 6.35, 7~208, 10, NK10, 11~165~227~24
    725, 6, 6.35, 7~358, 10, NK10, 11~315~337~355~337~355, 6, 6.35, 7~265, 6, 6.35, 7~218, 10, NK10, 11~185~247~26
    Shaft Bore Dia. 8, 11, 13, 14, 17, 21~31 are not available for Shaft Bore Spec. C.      

    Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys


    Timing Pulleys MXL Type:Related Image

    Here to the Option Overview PDF