STRAIGHT EJECTOR PINS / DIN 1530 / EN 1.2344 Equiv. / Nitrided / L Dimension Configurable
- DIN Standard
- New Product
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
D-EPN-L1.5-[40-200/0.01]
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
Drawing / Product specification
D-EPN-L (L Specify)
[ H ]Surface base: 900HV～
Material: 40～45HRC
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| D-EPN-L1.5-[40-200/0.01] |
| Part Number | Minimum order quantity | Volume Discount | Shaft diameter tolerance (Reference tolerance) | Head thickness | D/P (Shaft diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|
| 1 | 13 Days | -0.002/-0.008 | 1.5mm | 1.5 | 40 ～ 200 |
Loading...
Specification table
■L Dimension Specify| H | T | P g6 | Part No. | L 0.01mm increments | |
| Type | P | ||||
| 2.5 | 1.2 | -0.002 -0.008 | D-EPN-L | 1 | 40.00 ～ 200.00 |
| 3 | 1.5 | 1.5 | |||
| 4 | 2 | 2 | 40.00 ～ 315.00 | ||
| 5 | 2.5 | ||||
| 6 | 3 | 3 | 40.00 ～ 400.00 | ||
| 7 | -0.004 -0.012 | 3.5 | |||
| 8 | 4 | 40.00 ～ 500.00 | |||
| 4.5 | 40.00 ～ 250.00 | ||||
| 10 | 5 | 40.00 ～ 400.00 | |||
| 5.5 | 40.00 ～ 200.00 | ||||
| 12 | 5 | 6 | 40.00 ～ 1000.00 | ||
| -0.005 -0.014 | 6.5 | 40.00 ～ 250.00 | |||
| 14 | 8 | 100.00 ～ 1000.00 | |||
| 16 | 10 | ||||
| 18 | 7 | -0.006 -0.017 | 12 | ||
| 22 | 16 | ||||
| 26 | 8 | -0.007 -0.020 | 20 | ||
| 32 | 10 | 25 | 100.00 ～ 500.00 | ||
Order Example
| Part No. | - | L | ||
| D-EPN-L 1 | - | 100.00 | ||
Alteration
| Part No. | - | L | － | (KC・WKC…etc.) | ||
| D-EPN-L 1 | - | 100.00 | － | WKC2.115 | ||
Basic information
| Brand | MISUMI | Shape type | No tip processing | Material | EN 1.2344 Equiv. |
|---|---|---|---|---|---|
| L dimension tolerance (Reference tolerance) | +0.02/0 or +0.05/0 or +0.5/0 | Surface treatment | Nitrided | Tip shape | No |
| Gas release shape | No | Character engraving type | No | Number of engraving characters | No |
| Technical Standard | DIN |
Configure
Basic Attributes
-
Type
- D-EPN-L
-
Shaft diameter tolerance (Reference tolerance)
- -0.002/-0.008
- -0.004/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
-
D/P (Shaft diameter)(mm)
-
L (L dimension)(mm)
-
Head thickness
- 1.2mm
- 1.5mm
- 2mm
- 3mm
- 5mm
- 7mm
- 8mm
- 10mm
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 13 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Fizetési mód
Átutalás
Előre fizetés
Igény szerinti gyártás
Tanúsítványok
Copyright © MISUMI Corporation Minden jog fenntartva.