Following a worldwide Microsoft service outage, we are currently experiencing delays in email responses and cannot process orders via email.
Please place your orders through the MISUMI EC webshop, which is fully operational. Order confirmations may not reach your Outlook inbox but are available in your MyMISUMI Portal. We apologise for the inconvenience and appreciate your understanding.
In industrial manufacturing, measurement technology is a fundamental component for monitoring and quality control. Industrial measuring techniques allow collecting and quantifying precise data and information about the sizes, properties and characteristics of objects. The following article discusses the importance measurement technology has for quality assurance, and it introduces some methods from measurement technology.
Measurement technology refers to the systematic use of measuring instruments, measuring methods and measuring processes for the recording and analyzing identifiable variables quantitatively.
These can be, for example, physical variables, properties of objects and substances, as well as processes or systems. One possible focus for the use of measurement technology is the verification of product standards and specifications. Defects and deviations can thus be detected and corrected in a timely manner, even before the products come onto the market.
The following advantages result from the utilization of different measuring techniques:
The basic standard for measurement technology in Germany is DIN 1319. It defines the following:
The Parts of the Standard define, among other things, terms for measuring equipment, evaluation and measurement uncertainty. This includes the following means:
Software is one of these tools. It is used, for example, to perform measurements using CAD models of test specimens. To ensure quality, test equipment must be monitored at regular intervals.
The following table provides an exemplary overview of measurable variables and suitable measuring devices:
| Size | Possible Units of Measure | Measuring device |
| Pressure | Bar, Pa | Pressure gauges such as manometers, barometers, etc. |
| Flow rate | m3/s, l/min, kg/s | Flow meters such as sensors, flow meters |
| Hardness | Shore A 3 s, HBW 5/250 |
Hardness measuring devices such as durometers |
| Speed | m/s | Tachometer |
| Length/distance/depth | mm, cm, m | Distance sensors, distance measuring devices, but also gauges and rulers |
| Current | A | Electrical equipment such as current meters |
| Voltage | V | Electrical equipment such as voltmeters |
| Temperature | K, ℃, ℉ | Thermometers |
For precise measurements and quality controls, there are different types of measuring techniques, both mechanical and non-contact:
Some of the measuring techniques and their application possibilities in the industry are discussed in more detail below.
Mechanical measuring instruments are used in various applications and industries to measure lengths, angles, pressure, temperature and other physical parameters. MISUMI offers a wide range of mechanical measuring techniques, for example:
Tactile measuring techniques are a sub-area of mechanical measurement techniques. Tactile measuring sensors such as styluses or tactile probes can be used to measure lengths, widths and heights of components or workpieces. These are often used in manufacturing to ensure that parts have the correct dimensions.
In electrical measurement technology, electrical values such as voltage, amperage, resistance, power and other electrical parameters are primarily measured. An electrical measurement can, for example, proceed as follows: First, a sufficiently dimensioned measuring device must be selected. The measuring leads of the measuring device are then connected to the circuit to be tested or the device to be tested. To avoid short circuits, measuring tips should not come in contact with other parts of the circuit. In digital devices, the indicator may have to be calibrated to zero before the measurement. The result obtained is then compared with the expected voltages and evaluated to determine whether it is within the normal range.
Optical measuring techniques include, for example, industrial cameras that are directed toward the test object and are connected via a PC. The camera takes high-resolution images based on which parameters such as diameter are then calculated on the PC. The resolution extends down to the micrometer range. Optical measuring techniques are very flexible. They are suitable for a wide variety of workpieces. The principle works via the shadow edges of the objects: everything that can be depicted in the shadow can be measured using optical measurement technology. Nevertheless, the optical measurement technology has its limits: Special features such as grooves, bore holes or gear teeth in shafts cannot be reproduced this way. In these cases, it is advisable to add tactile measuring techniques to the optical measuring techniques. A measurement probe can, for example, scan and measure a gear.
Acoustic measuring techniques use various parameters such as the travel time of ultrasonic waves or reflection patterns to identify defects, irregularities or material changes. They are completely non-destructive. Ultrasonic sensors, for example, work with the propagation and reflection of sound waves. The sensor is held on one side of the workpiece, the contact surface area may be enlarged via a coupling agent such as a gel, and then the sound waves are guided into the workpiece. At the other end, they are reflected either by an attached stopper or also without one and sent back to the starting point. The transmitter then becomes the receiver. If there are now cavities in the workpiece, these would send back the reflection echo much earlier and be recorded as so-called error echo in the evaluation. Ultrasonic sensors can also be used in difficult-to-reach locations, such as bore holes.
In 3D measuring technology, precise three-dimensional measurements of objects are carried out. It allows collecting data about the geometric features and the spatial structure of three-dimensional objects. The 3D measurement technology can comprise various techniques such as laser scanning, fringe projection, stereovision, coordinate measuring machines (CMMs) and many others.
A coordinate measuring device works, for example, as follows: A CAD model of the workpiece to be tested is created and entered into a special software. The workpiece is then placed in the coordinate measuring device and its position is transferred to the software by means of pre-measurements. The device then traces the contours on the real workpiece using the CAD model and passes this information directly to the software. There, the actual dimensions are directly compared with the required dimensions. Any deviations found, such as tolerance exceedances, are also directly marked at this point. A prerequisite for 3D measurement technology is, of course, a well-prepared CAD model.
In recent years, digitalization of measurement technology has made considerable progress. This has improved efficiency, accuracy and flexibility and enabled integration into sophisticated automated manufacturing environments.
Digitalization has the following advantages: